Specifications

16. Using Peripherals with the USN52 L
USN52 L Operating Manual Page 115
To transmit a Data Logger Report showing one file or all files:
1. Select lower level menu:
2. Frame the column, which contains the COPY MODE func-
tion:
or ; or
3. Set COPY MODE to REPORT:
4. Frame the Data Logger functions (lower level menu): or
; or
5. Under the FILE NUMBER function, select the desired
file, ACTIVE XX or FULL XX. To print all files select ALL
FILES:
5. Initiate transmission:
Empty file locations and empty files will not be sent.
Files remain in memory after transmission has been completed.
To clear files, refer to Section 15.7 To clear the entire memory,
refer to Section 15.8.
Data Logger Report Format
Refer to Section 16.4 for a detailed description.
16.6 Printing Display and Parameters
NOTE: Output is formatted for the Epson FX-850 dot ma-
trix printer, with Intelligent Serial Interface Number 8148,
and other fully compatible printers.
Required cable: Product Code 022-505-518
This operation prints a single page report showing a facsimile of
the A-scan image and instrument control parameters at the time
is pressed.
Additional space is provided for user supplied information, such as
operator and equipment identification, job name, comments, and
date.
Connect the printer to the RS-232 I/O port using the cable speci-
fied in the note above. If necessary, set RS-232 protocol by fol-
lowing the procedure in Section 16.2.