Specifications

Page 22 USN52 L Operating Manual
Menu Display: Most functions are controlled via menus displayed in this area of the screen. The seven upper level and
three lower level menus are described in Chapter 6. The Menu Select Line displays the names of the
seven upper level menus with the currently selected menu highlighted. These menus are the most fre-
quently used. Lower level menus contain three columns of functions and fill the entire display area when
selected.
Measurement Line: Content of this line depends on the setting of certain menu functions described below. The unit automati-
cally displays the appropriate information for the current settings.
Measurement Line content will be: When these functions are set to:
Horizontal Graticule Scaling - 0 through 10 fixed: GATE LOGIC or MEASURE or GRATICULE = OFF
Horizontal Sweep Range - current RANGE setting: GATE LOGIC, MEASURE and GRATICULE ≠ OFF
Soundpath and Amplitude Data as follows:
S= Measurement from ZERO to
first echo in gate GATE LOGIC ≠ OFF and
when TOF is set to FLANK MEASURE = 0 to 1st and
S= Measurement from ZERO to highest echo in gate ANGLE = OFF
when TOF is set to PEAK
#= “Held” measurement value (no echo in gate)
H= Amplitude of highest echo in gate
4. Front Panel of the USN52 L