Specifications

USN52 L Operating Manual Page 43
When memory is clear, FILE
NUMBER selects number of
files and configures on-board
data logger. If files have been
configured, selects one file, or
all files, for logging or printing
data.
LOCATION selects location
number in file selected via
FILE NUMBER above.
VALUE displays contents of
selected file/location number.
Clears selected location.
FILE MODE enables/disables
data logger.
Note: To enable, COPY
MODE must also be set to
DATA LOGGER.
If no files configured:
ALL CLEAR or SET #1 to 99
If files have been configured:
1 to 99 or ALL FILES
File numbers preceded by
status of selected file:
EMPTY - No stored readings
ACTIVE - Contains readings
FULL - No available locations
1 to last location number
Note: Number of locations
depends on number of files
(Section 15.2).
EMPTY - No reading stored
x.xxx in (xx.x mm) - Value
stored in selected location
ERROR - Corrupted reading.
OFF - Data logger disabled.
THICKNESS - Data logger
enabled.
- decrease
- increase
- configure memory
(when a number is
displayed)
- clears files
(ALL FILES displayed,
hold for 3 sec.)
- decrease
- increase
- jump to loc. #1
- clear reading
(after 3 seconds)
- display desired option
Function Description Adjustment Range / Options Controls
7. USN52 L Menu Functions