Owners manual
Table Of Contents
- Front
- Contents
- Introduction
- Setting Up the Projector
- Making Basic Adjustments
- Making Detailed Adjustments
- Using WirelessHD
- Using HDMI Link
- Maintenance
- Problem Solving
- Specifications
- Notices

Maintenance 69
Cleaning the 3D Glasses
Use the included lint-free cloth (do not use paper towels) to gently wipe the 3D glasses
whenever you notice dust, dirt, or fingerprints on the surface.
Caution: Never rub the 3D glasses with abrasive materials.
Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power cord.
■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral
detergent. Then wipe the case and dry it with a dry cloth.
Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These
can damage the case.