PowerLite® Home Cinema 2040/2045 User's Guide
Contents PowerLite Home Cinema 2040/2045 User's Guide.................................................................................... 9 Introduction to Your Projector ................................................................................................................. Projector Features.............................................................................................................................. Product Box Contents..............................................................
Connecting to External USB Devices ............................................................................................ USB Device Projection.............................................................................................................. Connecting a USB Device or Camera to the Projector.............................................................. Selecting the Connected USB Source ......................................................................................
Correcting Image Shape with the Keystone Buttons...................................................................... Resizing the Image with the Zoom Ring ............................................................................................. Focusing the Image Using the Focus Ring......................................................................................... Remote Control Operation ...........................................................................................................
Projector Network Settings - Network Menu..................................................................................... Projector Information Display - Info Menu ........................................................................................ Event ID Code List....................................................................................................................... Projector Reset Options - Reset Menu ...............................................................................
Solving Projector or Remote Control Operation Problems ............................................................... Solutions to Projector Power or Shut-Off Problems ..................................................................... Solutions to Problems with the Remote Control........................................................................... Solving Network Problems ...............................................................................................................
PowerLite Home Cinema 2040/2045 User's Guide Welcome to the PowerLite Home Cinema 2040/2045 User's Guide.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual.
• Audio Out port for connection to external speakers or stereo system Easy-to-use setup and operation features • Real-time, automatic vertical keystone correction and horizontal keystone correction slider for flexible projector placement • Epson's Instant Off and Direct Power On features for quick setup and shut down • 1.
4 Power cord 5 Projector documentation CD Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional components: • You can purchase one from Epson or an authorized Epson reseller. • To receive an HDMI signal, you need a compatible HDMI cable. You can purchase one from Epson or an authorized Epson reseller.
Option or part Part number Genuine Epson replacement lamp (ELPLP88) V13H010L88 Replacement air filter (ELPAF32) V13H134A32 RF 3D glasses (ELPGS03) V12H548006 Projector ceiling mount ELPMBPJG Accolade Duet ultra portable projector screen ELPSC80 ES1000 ultra portable tabletop projection screen V12H002S4Y ES3000 ultra portable projector screen V12H002S3Y Belkin Pro Series VGA/SVGA cable, 6 ft F3H982-06 Belkin Pro Series VGA/SVGA cable, 10 ft F3H982-10 Belkin Pro Series VGA/SVGA cable, 25 f
Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your projector. • Tips contain additional projection information. Parent topic: Introduction to Your Projector Where to Go for Additional Information Need quick help on using your projector? Here's where to look for help: • epson.
Projector Parts - Front/Top 1 Control panel 2 Horizontal keystone slider 3 Zoom ring 4 Focus ring 5 Rear foot 6 Kensington security lock slot 7 Air filter cover 8 Air filter intake vent 9 Remote receiver 10 Lens 11 Front adjustable foot 12 Foot adjust lever 15
13 A/V Mute slide (lens cover) 14 Exhaust vent 15 A/V Mute slide lever 16 Lamp cover Parent topic: Projector Part Locations Projector Parts - Rear 1 USB Type A port 2 Service port 3 PC port (VGA) 4 Video port 5 HDMI 1 / MHL port 6 HDMI 2 port 7 Audio ports 8 Audio Out port 9 Remote receiver 10 AC input port 16
Parent topic: Projector Part Locations Projector Parts - Base 1 Front adjustable foot 2 Rear feet 3 Security cable attachment point 4 Mounting bracket holes Parent topic: Projector Part Locations 17
Projector Parts - Control Panel 1 WLAN light (PowerLite Home Cinema 2045) 2 Status light 3 Power button/light 4 Home button (displays the Home screen) 5 Menu button (accesses projector menu system) 6 Enter button (selects options) 7 Esc button (cancels/exits functions) 8 Vertical keystone adjustment buttons (adjust screen shape) and arrow buttons 9 Volume control buttons, horizontal keystone adjustment buttons (adjusts screen shape), and arrow buttons 10 Source button (cycles through the
12 Lamp light 13 Screen Mirroring light (PowerLite Home Cinema 2045) Parent topic: Projector Part Locations Projector Parts - Remote Control 1 Power button 19
2 Source buttons (select image source) 3 HDMI Link button (displays the settings menu for HDMI Link), Link Menu button (displays the main menu of the connected device), and control buttons (control playback and other features of connected devices that support the HDMI CEC standard) 4 Menu button (accesses projector menu system) 5 Arrow buttons (move through on-screen options) 6 User button (customizable for different functions) 7 Color Mode button (selects display modes) 8 2D/3D button (cycles
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Front Rear Front Ceiling 22
Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system. Parent topic: Projector Placement Related references Projector Feature Settings - Settings Menu Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image.
Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada).
Screen or image size Projection distance Wide to Tele 1 50 inches (126 cm) 65 to 78 inches (165 to 199 cm) 2 80 inches (203 cm) 105 to 126 inches (266 to 320 cm) 3 100 inches (254 cm) 131 to 158 inches (334 to 401 cm) 4 150 inches (381 cm) 198 to 238 inches (503 to 603 cm) 16:10 Aspect Ratio Image or Screen Screen or image size Projection distance Wide to Tele 1 50 inches (126 cm) 57 to 69 inches (146 to 176 cm) 2 80 inches (203 cm) 93 to 111 inches (235 to 283 cm) 3 100 inches (254 cm) 116
Projector Connections You can connect the projector to a variety of computer, video, and audio sources to display presentations, movies, or other images, with or without sound. • For video projection, connect devices such as DVD players, gaming consoles, streaming devices, digital cameras, smartphones, and tablets with compatible video output ports. Note: To connect a smartphone or tablet, you may need to obtain an adapter that allows you to connect to the projector.
Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. 1. Connect the HDMI cable to your video source's HDMI output port. 2. Connect the other end to one of the projector's HDMI ports.
2. If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable. 3. Connect the other end of the cable to the projector's HDMI 1/MHL port. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
commands, set your game console's output format to a progressive signal of 480p, 720p, or higher. See your game console documentation for instructions. Parent topic: Connecting to Video Sources Related tasks Connecting to a Video Source for Sound Connecting to a Video Source for Sound You can play sound through the projector's speaker system if your video source has audio output ports. Connect the projector to the video source using an RCA audio cable.
Connecting to a Computer for HDMI Video and Audio Connecting to a Computer for Sound Parent topic: Projector Connections Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable. Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port. Contact Apple for compatible adapter options. 1.
2. Connect the other end to one of the projector's HDMI ports. Note: The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.
You can also connect the projector to an amplifier with speakers. Note: The projector's built-in speaker system is disabled when you connect external speakers. 1. Make sure your computer or video source is connected to the projector with both audio and video cables as necessary. 2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pinjack cable, or another type of cable or adapter. 3. Connect one end of the cable to your external speakers as necessary. 4.
• Multimedia storage viewer • USB memory card reader Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices, and must be USB Mass Storage Class-compliant.
3. Connect the other end of the cable (if applicable) to your device. Parent topic: Connecting to External USB Devices Related topics Projecting a Slide Show Selecting the Connected USB Source You can switch the projector's display to the source you connected to the USB Type A port. 1. Make sure the connected USB source is turned on, if necessary. 2. Press the Slideshow button on the remote control. 3. Press the button again to cycle through other USB sources, if available.
1. Remove the battery cover. 2. Insert the batteries with the + and – ends facing as shown.
3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Setting Up the Projector Opening the Lens Cover To open the projector's lens cover, slide the A/V Mute slide lever until it clicks into the open position.
Parent topic: Setting Up the Projector 37
Wireless Network Projection You can send images to your projector through a wireless network (PowerLite Home Cinema 2045). You can connect the projector to your wireless network by configuring the connection manually using the projector's Network menus. After setting up the projector, install the network software. You can download the latest software and documentation from the Epson web site.
3. Select the Network menu and press Enter. 4. Make sure the Wireless LAN Power option is set to On. 5. Select Network Configuration and press Enter. 6. Select the Basic menu and press Enter.
7. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. (Default user name is EPSONWEB; default password is admin.) • Display LAN Info lets you select how the projector displays network information.
Wireless LAN Menu Settings Parent topic: Wireless Network Projection Wireless LAN Menu Settings Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you quickly connect to one computer, smartphone, or tablet Advanced: lets you connect to a wireless network access point Channel 1ch 11ch In Quick connection mode, selects the frequency band (channel) used by the wireless LAN SSID Up to 32 alphanumeric characters (spaces not recommended) Se
Setting Options Description IP Address Display On Selects whether to display the IP address on the network standby screen Off Parent topic: Selecting Wireless Network Settings Manually Searching for a Wireless Network You can use your projector's site survey function to quickly locate and connect to available wireless networks. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter.
5. Select the Wireless LAN menu and press Enter. 6. Select Advanced as the Connection Mode setting and press Enter. 7. Select Search Access Point and press Enter. 8. Select the name of the wireless network you want to connect to and press Enter. 9. If the network has security enabled, enter the wireless password.
You see a screen like this: 10. Select the settings on the security menu as necessary for your network. 11. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Parent topic: Wireless Network Projection Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1.
1. Click the AirPort icon on the menu bar at the top of the screen. 2. Make sure AirPort is turned on, then do one of the following: • If your projector is set up on an existing network (Advanced mode), select the network name (SSID). • If your projector is configured for Quick mode, select the projector's SSID. Parent topic: Wireless Network Projection Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network.
6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus. Wireless Security Menu Settings Parent topic: Wireless Network Projection Related references Projector Network Settings - Network Menu Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the network you are connecting the projector to.
Screen Mirroring Restrictions Note the following when using Screen Mirroring features: • You cannot play audio with more than 3 channels. • You cannot project images with a resolution above 1920 × 1080 and a frame rate above 50 fps. • You cannot play 3D video. • Extended Miracast features on Windows 8.1 are not supported. • The extended Intel WiDi version 4 features are not supported. • You may not be able to view contents with copyright protection with a Miracast connection.
4. Select Screen Mirroring Settings and press Enter. 5. Select these Screen Mirroring settings as necessary: • Display Name lets you enter a name up to 32 alphanumeric characters long to identify the projector from a list of available devices. • Adjust Image Quality lets you adjust the screen mirroring speed/quality. Select a small number to improve the quality and select a large number to increase the speed. 6.
You see a list of available devices. 8. Select your projector from the list. 9. If you see the PIN entry screen on your computer or mobile device, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image and click Next. The projector displays the image from your computer or mobile device. Note: It may take some time to establish the connection. Do not disconnect the projector's power cord while it is connecting to your device.
6. Select Devices. 7. Click Add a device. You see a list of available devices. 8. Select your projector from the list. 9. If you see the PIN entry screen on your computer or mobile device, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image and click Next. The projector displays the image from your computer or mobile device. Note: It may take some time to establish the connection.
3. On your computer or mobile device, open the Intel WiDi software. You see a list of available devices. 4. Select your projector's Display Name from the list. 5. If you see the PIN entry screen on your computer or mobile device, enter the PIN code displayed on the projector's Screen Mirroring standby screen or at the bottom right of the projected image. The projector displays the image from your mobile device. Note: It may some time to establish the WiDi connection.
3. On your mobile device, use the Miracast function to search for the projector. Note: See your mobile device's documentation for information on accessing the Miracast function. You see a list of available devices. 4. Select your projector from the list. 5. If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image. The projector displays the image from your mobile device.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features.
1. Slide the projector's lens cover until it clicks into the open position.
2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue. This indicates that the projector is receiving power. 4. Press the power button on the projector or the remote control to turn on the projector. The projector beeps and the Status light flashes blue as the projector warms up.
• Turn on the connected computer or video device. • Insert a DVD or other video media and press the play button, if necessary. • Press the button for the video source on the remote control. • Press the Source button on the projector to detect the video source, or press a source button on the remote control. • If the Home screen is displayed, select the source you want to project.
3. To transport or store the projector, make sure the Status light is off, then unplug the power cord. Caution: To avoid damaging the projector or lamp, never unplug the power cord when the Status light is on or flashing.
4. Slide the projector's lens cover until it clicks into the closed position. Parent topic: Using Basic Projector Features Viewing 3D Images You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video device and a pair of Epson RF 3D glasses (not included with your projector). You can also convert 2D images to 3D using the 2D-to-3D Conversion setting in your projector's Signal > 3D Setup menu. You can purchase Epson RF 3D glasses from an Epson authorized reseller.
4. Press the 2D/3D button on the remote control to activate 3D mode, if necessary. 5. Slide the power switch on the 3D glasses to the On position. 6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector. Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing.
Related tasks Connecting to an HDMI Video Source Connecting to a Computer for HDMI Video and Audio Pairing the 3D Glasses with the Projector Pair the glasses with the projector to establish communication between them for 3D viewing. 1. Turn on the projector. 2. Set the image source to HDMI. 3. Project a 3D image. 4. Slide the power switch on the 3D glasses to the On position. 5.
Charging the 3D Glasses Charge the glasses when the status light on the glasses flashes red to indicate a low battery. 1. Connect the smaller end of the charging cable to the port on the bridge of the glasses. Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable. 2. Connect the other end of the cable to the USB Type A port on the projector or any other device such as a computer that has an active USB Type A port.
3D Viewing Range When you view 3D images, make sure you are positioned within the viewing range shown here. 1 32 ft (10 m) 2 10 ft (3 m) Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button.
3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet. 1. Turn on the projector and display an image.
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape.
When you turn on automatic keystone correction in your projector's Settings menu, your projector automatically corrects vertical keystone effects when you reposition the projector.
2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 3. Press a keystone button on the projector's control panel to adjust the image shape. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote control using the Keystone settings in the projector menus.
Resizing the Image with the Zoom Ring 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Pattern button on the remote control. 2. To enlarge or reduce the image size, rotate the projector's zoom ring. Parent topic: Using Basic Projector Features Focusing the Image Using the Focus Ring 1. Turn on the projector and display an image.
2. To sharpen the image focus, rotate the projector’s focus ring. Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.
1 19.7 feet (6 m) 2 ± 15° Horizontal 1 19.7 feet (6 m) 2 ± 30° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
3. Do one of the following: • Press the Source button on the projector until you see the image from the source you want. • Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to cycle through the sources.
Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly. • Front (default setting) lets you project from a table in front of the screen. • Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount. • Rear flips the image horizontally to project from behind a translucent screen.
5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Related concepts Projector Placement Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control.
3. Select the Signal menu and press Enter. 4. Select Aspect and press Enter. 5. Select the aspect ratio you want to use for your input signal and press Enter. 6. Select Menu or Exit to exit the menus. Parent topic: Image Aspect Ratio Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source. Note: When the projector is in 3D mode, the aspect ratio is automatically set to Normal.
Aspect ratio setting Description Full Displays images using the full width of the projection area, but does not maintain the aspect ratio. Note: The Auto aspect ratio setting is available only for HDMI image sources. Parent topic: Image Aspect Ratio Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types.
3. Press the Color Mode button on the remote control to change the Color Mode. A list of available Color Modes appears. 4. To cycle through all the available Color Modes for your input signal, press the up or down arrow button. 5. Press Enter to select a Color Mode.
Color Mode Description 3D Dynamic Best for projecting in a bright room 3D Cinema Best for movies projected in a dark room Parent topic: Color Mode Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. 3. Select the Image menu and press Enter. 4.
Parent topic: Color Mode Controlling the Volume with the Volume Buttons You can use the Volume buttons on the projector or the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the projector’s internal speaker system or any external speakers you connected to the projector. You must adjust the volume separately for each connected input source. 1. Turn on the projector and start a presentation that includes audio. 2.
Related concepts USB Device Projection Related tasks Connecting a USB Device or Camera to the Projector Supported Slideshow File Types You can project these types of files using the projector's Slideshow feature. Note: For best results, place your files on media that is formatted in FAT16/32. File contents File type (extension) Details Image .
1. Press the Slideshow button on the projector remote control. The Slideshow screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. • To view additional images in a folder, highlight Next page or Previous page and press Enter. 3.
5. To stop the display, follow the on-screen instructions or press the Esc button. Slideshow Display Options Parent topic: Projecting a Slide Show Related tasks Connecting a USB Device or Camera to the Projector Disconnecting a USB Device or Camera From the Projector Slideshow Display Options You can select these display options when using the projector's Slideshow feature.
Setting Options Description Screen Switching Time No Does not display the next file automatically 1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically; high resolution images may switch at a slightly slower rate Effect Wipe Transitions between images with a wipe effect Dissolve Transitions between images with a dissolve effect Random Transitions between images using a random variety of effects Parent topic: Starting a Slide Show 81
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Projecting Two Images Simultaneously Projector Security Features Shutting Off the Picture and Sound Temporarily You can temporarily turn off the projected picture and sound if you want to redirect your audience's attention during a presentation.
Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images from different image sources (HDMI1/HDMI2 and Screen Mirroring) next to each other (PowerLite Home Cinema 2045). You can control the split screen feature using the projector menus. Note: While you use the split screen feature, other projector features may not be available and some settings may be automatically applied to both images.
You see this screen: 5. To change the size and orientation of the image sent by Screen Mirroring, select the Screen Right Format setting, press Enter, select size and orientation options, press Enter, and press Menu to exit. (The image sent by Screen Mirroring will always be on the right side.) 6. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an audio option, press Enter, and press Menu to exit. 7.
2. Select the Settings menu and press Enter. 3. Select the Lock Setting setting and press Enter. 4. Select one of these lock types and press Enter: • To lock the projector's power button, select Child Lock. To turn the projector on, you must press the power button for longer than three seconds. • To lock all buttons, select Control Panel Lock > Full Lock. • To lock all buttons except the power button, select Control Panel Lock > Partial Lock.
Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them. Parent topic: Locking the Projector's Buttons Related references Projector Feature Settings - Settings Menu Installing a Security Cable You can install two types of security cables on the projector to deter theft. • Use the security slot on the projector to attach a Kensington lock.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings.
1. Press the Menu button on the control panel or remote control. You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4. Press the up or down arrow button to move through the settings. 5. Change the settings using the buttons listed on the bottom of the menu screens. 6. To return all the menu settings to their default values, select Reset. 7.
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source and resolution. (If a menu is grayed-out, that item is not available for the input source you are currently using.) To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Color Temp.
Setting Options Description Auto Iris Off Adjusts the projected luminance based on the image brightness when certain Color Modes are selected Normal High Speed Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode, use the Power Consumption setting. Parent topic: Adjusting the Menu Settings Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically.
Setting Options Description 3D Setup 3D Display Selects various 3D options 3D Format 3D Display: enables 3D mode 2D-to-3D Conversion 3D Format: selects the 3D format 3D Depth Diagonal Screen Size 3D Brightness Inverse 3D Glasses 3D Viewing Notice 2D-to-3D Conversion: converts 2D images to 3D images 3D Depth: sets the depth for the 3D image Diagonal Screen Size: selects the actual size of the screen to maximize the 3D effect 3D Brightness: adjusts the brightness of the 3D image Inverse 3D Glasses:
Setting Options Description Auto Setup On Automatically optimizes computer image quality (when On) Off Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or automatically (HDMI 1/HDMI2 only) Off 4% 8% Advanced HDMI Video Range Image Processing HDMI Video Range sets the video range to match the setting of the device connected to the HDMI input port Auto: detects the video range automatically Normal: for images from a device other than a computer; c
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features.
Setting Options Description Split Screen — Splits the screen in two and displays images from the HDMI source and the Screen Mirroring source simultaneously Volume Varying levels available Adjusts the volume of the projector’s speaker system HDMI Link Device Connections Adjusts the HDMI Link options that allow the projector remote to control HDMI-connected devices that support the CEC standard (PowerLite Home Cinema 2045) HDMI Link Audio Out Device Power On Link Power Off Link Device Connection
Setting Options Description Lock Setting Child Lock Controls projector button locking to secure the projector Control Panel Lock Child Lock: locks the power button Control Panel Lock: • Full Lock: locks all buttons • Partial Lock: locks all buttons except the power button Note: The lock icon is displayed on the screen if any control panel buttons are pressed while this setting is enabled.
Setting Options Description Memory Load Memory Controls memory functions for current projector settings Save Memory Erase Memory Rename Memory Load Memory: lets you load a saved memory Save memory: lets you save current projector settings to memory Erase Memory: lets you delete a saved memory Rename Memory: lets you rename a saved memory using 9 predetermined name types or up to 12 characters in a customized name Reset Yes Resets all settings except Audio Out Device, Power On Link, Power Off Link,
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Home Screen Home Screen Auto Disp. Selects various options for the projector's Home screen Custom Function 1 Custom Function 2 Home Screen Auto Disp.
Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen Display Background: selects the screen color or Epson logo to display when no signal is received Startup Screen: controls whether the Epson logo appears when the projector starts up Projection Front Front/Ceiling Rear Rear/Ceiling 100 Selects the way the projector faces the screen so the image is oriented correctly
Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Sleep Mode Timer Illumination High Altitude Mode Auto Source Search Direct Power On: lets you turn on the projector without pressing the power button Sleep Mode: automatically places the projector in standby mode after an interval of inactivity Sleep Mode Timer: sets the interval for sleep mode (1 to 30 minutes) Illumination: turns off the power and status lights on the projector High Altitude Mode: reg
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network (PowerLite Home Cinema 2045).
Setting Options Description Net.
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Select Version to display the projector's firmware version. Select Projector Info to display the settings described below. Note: Available settings depend on the current input source. The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours.
Information item Description 3D Format Displays the 3D format of the current input source during 3D projection Sync Info Displays information that may be needed by a service technician Deep Color Displays the deep color of the current input source Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projector's serial number Event ID (PowerLite 2045) Displays the Event ID number corresponding to a specific projector problem;
Event ID code Cause and solution 0022 Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. 0027 0028 0029 0030 0031 0035 0434 0481 0482 0485 0023 0024 0025 0432 0435 Connection failed. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image.
Event ID code Cause and solution 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct. 0894 Communication with unauthorized access point was disconnected. Contact your network administrator. 0898 Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. 0020 A communication error has occurred.
You can reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option and you can also reset all memory entries using the Reset Memory option.
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue.
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid directly on the projector. Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector case. These can damage the case. Do not use canned air, or the gases may leave a residue. Parent topic: Projector Maintenance Air Filter and Vent Maintenance Regular filter maintenance is important to maintaining your projector.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Caution: Do not use canned air. The gases may leave a flammable residue or push dust and debris into the projector's optics or other sensitive areas. 3. If dust is difficult to remove or the air filter is damaged, replace the air filter.
2. Carefully open the air filter cover. 3. Pull the air filter out of the projector. Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown and push gently until it clicks into place.
5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover. Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you open the lamp cover. 4. Slide the lamp cover out and lift it off.
5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out. 6. Grasp the raised section of the lamp and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 8. Push in the lamp firmly and tighten the screws to secure it. Caution: Do not over-tighten the screws.
9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage. Parent topic: Projector Lamp Maintenance Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
3. Select the Reset menu and press Enter. 4. Select Reset Lamp Hours and press Enter. You see a prompt asking if you want to reset the lamp hours. 5. Select Yes and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual.
1. Remove the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Projector Maintenance Related references Remote Control Specifications Transporting the Projector The projector contains precision parts, some of which are glass.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Solving Network Problems Where to Get Help Projection Problem Tips If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it on.
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.
Power light Status light Lamp light Temp light Status and solution Blue Off Off Off Standby or sleep mode with communication On (PowerLite Home Cinema 2045) Blue Flashing blue Off Off Shutting down; when the Status light stops flashing, you can unplug the projector Flashing blue Varies Off Flashing orange Projector is too hot • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • Make sure the environmental te
Power light Status light Lamp light Temp light Status and solution Off Flashing blue Orange Lamp has a problem Off • Check to see if the lamp is burned out, broken, or installed incorrectly; reseat or replace the lamp as necessary • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Off Flashing blue Off Orange Projector has overheated and turned off; leave it turned
Power light Status light Lamp light Temp light Status and solution Any Any Any Any Wireless LAN light flashes blue slowly; Wireless LAN error, select Off as the Wireless LAN Power setting, then switch the setting back to On Any Any Any Any Wireless LAN light is off; Wireless LAN is not available, check that the Wireless LAN Power setting is set to On Any Any Any Any Screen Mirroring light is solid blue; Screen Mirroring connection is available Any Any Any Any Screen Mirroring light fl
Screen Mirroring Light Status Solution Blue Screen Mirroring connection is available Flashing blue quickly Connecting to a device Flashing blue slowly Screen Mirroring error; turn the Screen Mirroring setting off and then on again Off Screen Mirroring is not available; make sure the Wireless Mode setting is on Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help.
• Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources. • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver. • Press the Menu button. If the projector menu is able to display, there may be a problem with the connected video source, cable connection, or port.
Related concepts Projector Connections Displaying From a PC Laptop If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to display on an external monitor. 1. Hold down the laptop's Fn key and press the key labelled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. 2. To display on both the laptop's monitor and the projector, try pressing the same keys again. 3.
Supported Video Display Formats Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Try adjusting the image position using the Position menu setting. • Select a different image aspect ratio from the Signal menu. • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.
Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: • Separated from the power cord to prevent interference • Securely connected at both ends • Not connected to an extension cable • No longer than 10 feet (3 m) for VGA/computer cables or 24 feet (7.
• Position the projector close enough to the screen. • Position the projector so the keystone adjustment angle is not so wide that it distorts the image. • Turn on automatic keystone adjustment in the projector's menus. • Adjust the Sharpness setting to improve image quality. • If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
• If the image has been progressively darkening, you may need to replace the projector lamp soon. Parent topic: Solving Image or Sound Problems Related concepts Projector Lamp Maintenance Related references Image Quality Settings - Image Menu Projector Setup Settings - Extended Menu Solutions When a 3D Image Does Not Display Correctly If a 3D image does not display correctly, try the following solutions: • Press the 2D/3D button on the remote control to switch to 3D mode, if necessary.
Related references Projector Feature Settings - Settings Menu 3D Viewing Range Optional Equipment and Replacement Parts Related tasks Cleaning the 3D Glasses Charging the 3D Glasses Pairing the 3D Glasses with the Projector Solutions to Sound Problems If there is no sound when you expect it or the volume is too low or high, try the following solutions: • Adjust the projector's volume settings. • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.
Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Problems with the Remote Control If the projector does not respond to remote control commands, try the following solutions: • Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries. • Make sure you are operating the remote control within the reception angle and range of the projector. • Make sure the projector is not warming up or shutting down.
Solutions When Wireless Authentication Fails • If the wireless settings are correct, but authentication fails, you may need to update the Time/Schedule Settings on the Extended menu. • Make sure the Wireless LAN Power setting is set to On. • Check the Security settings and passphrase in the Network Configuration menu. Parent topic: Solving Network Problems Where to Get Help If you need to contact Epson for technical support services, use the following support options.
Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales). To purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer referral in Canada).
Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supported Video Display Formats General Projector Specifications Type of display Poly-silicon TFT active matrix Resolution 1920 × 1080 pixels (1080p) Lens F=1.
Image size 34 inches (0.86 m) to 332 inches (8.4 m) (in native aspect ratio) Projection distance 36 inches (0.91 m) to 431 inches (10.9 m) (in native aspect ratio) Projection methods Front, rear, ceiling-mounted Optical aspect ratio 16:9 (width-to-height) Focus adjustment Manual Zoom adjustment Manual Zoom ratio 1:1.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time. Parent topic: Technical Specifications Remote Control Specifications Reception range 19.7 feet (6 m) Batteries Two alkaline or manganese AA Parent topic: Technical Specifications Projector Dimension Specifications Height (excluding feet) 4.5 inches (114 mm) Width 11.7 inches (297 mm) Depth 9.
Power consumption Operating: (100 to 120 V) Normal Power Consumption mode: 307 W ECO Power Consumption mode: 231 W Standby: 0.21 W (Communication Off), 2.1 W (Communication On) Power consumption Operating: (220 to 240 V) Normal Power Consumption mode: 291 W ECO Power Consumption mode: 224 W Standby: 0.28 W (Communication Off), 2.
Canada ICES-003 Class B CSA C22.2 No. 60950-1-07 Parent topic: Technical Specifications Supported Video Display Formats For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 VGA 60 640 × 480 SDTV (480i/480p) 60 720 × 480 SDTV (576i/576p) 50 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30 1920 × 1080 MHL input signals HDMI 3D Signals Display format Refresh rate (in Hz) Resolution (in pixe
Display format Refresh rate (in Hz) Resolution (in pixels) 3D formats HDTV (720p) 50/60 1280 × 720 Side by Side Top and Bottom HDTV (1080i) 50/60 1920 × 1080 Side by Side HDTV (1080p) 50/60 1920 × 1080 — 24 1920 × 1080 Side by Side Top and Bottom Parent topic: Technical Specifications 145
Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Open Source Software License Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic: Notices Important Safety Information Warning: The projector and its accessories come packaged in plastic bags.
projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and could damage the projector. • Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of magnetic fields. • Use the type of power source indicated on the projector. Use of a different power source may result in fire or electric shock. If you are not sure of the power available, consult your dealer or power company.
• Never open any covers on the projector except as specifically explained in this manual. Never attempt to disassemble or modify the projector. Refer all repairs to qualified service personnel.
WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and following.
• Viewing 3D content may cause dizziness and disorientation for some viewers. Therefore, to avoid injury do not place your projector or screen near open stairwells, balconies, or wires, and do not sit near objects that could be broken if accidentally hit.
Parent topic: Important Safety Instructions Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including failsafes and redundancies into your design to maintain safety and total system reliability.
For Canadian Users CAN ICES-3(B)/NMB-3(B) Parent topic: Notices Open Source Software License GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, contact Epson.
• gdb-6.4 • gawk-3.1.5 • oprofile-0.9.2 • binutils-2.16.1 • diehotplug0.4 • MTD-utils • Yaffs2-slpha1 • pppoe-3.8 • udftools-1.0.0b3 • lrzsz-0.12.20 • wireless-tools.29 • yaffs2-utils • squshfs 4.2 • coreutils 6.9 The GNU General Public License Version 2 is as follows. You also can see the GNU General Public License Version 2 at http://www.gnu.org/licenses/. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc.
this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.
For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License.
• grencode-3.4.2 • libnl-3.2.24 • uclibc 0.9.30.3 • ebase 1.2.2 • qdecoder 8.0 • neon-0.28.6 • neon-0.27.2 • libotf-0.9.9 • fribidi-0.10.9 • DirectFB-1.4.2 • libcharguess 1.0b The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc.
charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.
non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in nonfree programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License.
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
The "BSD License" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. List of BSD License programs • tcpdump-3.9.7 • pppd-2.4.4 License terms of conditions of each program which are provided by owner of the copyright to the "BSD License" are as follows. Copyright (c) The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Kenneth Almquist.
List of libjpeg programs • libjpeg-6b License terms of conditions of each program which are provided by owner of the copyright to the "libjpeg" are as follows. Copyright (C) 1994-1997, Thomas G. Lane. This file is part of the Independent JPEG Group's software. For conditions of distribution and use, see the accompanying README file. This distribution contains the sixth public release of the Independent JPEG Group's free JPEG software.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG author's name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as "the Independent JPEG Group's software".
List of libpng programs • libpng-1.2.49 • libpng-1.2.18 License terms of conditions of each program which are provided by owner of the copyright to the "libpng" are as follows. This copy of the libpng notices is provided for your convenience. In case of any discrepancy between this copy and the notices in the file png.h that is included in the libpng distribution, the latter shall prevail.
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng-0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
A "png_get_copyright" function is available, for convenient use in "about" boxes and the like: printf("%s",png_get_copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative. Glenn Randers-Pehrson glennrp at users.sourceforge.
Jean-loup Gailly jloup@gzip.org Mark Adler madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. Apache-2.
otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
(including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed. 4. Redistribution.
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability.
aes-src-29-04-09 This projector product includes the open source software program "aes-src-29-04-09" which applies the terms and conditions provided by owner of the copyright to the "aes-src-29-04-09". The "aes-src-29-04-09" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The newlib subdirectory is a collection of software from several sources. Each file may have its own copyright/license that is embedded in the source file. Unless otherwise noted in the body of the source file(s), the following copyright notices will apply to the contents of the newlib subdirectory: (1) Red Hat Incorporated Copyright (c) 1994-2007 Red Hat, Inc. All rights reserved.
The author of this software is David M. Gay. Copyright (c) 1991 by AT&T. Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software. THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY.
So that all may benefit from your experience, please report any problems or suggestions about this software to the 29K Technical Support Center at 800-29-29-AMD (800-292-9263) in the USA, or 080089-1131 in the UK, or 0031-11-1129 in Japan, toll free. The direct dial number is 512-462-4118. Advanced Micro Devices, Inc. 29K Support Products Mail Stop 573 5900 E. Ben White Blvd. Austin, TX 78741 800-292-9263 (5) C.W. Sandmann Copyright (C) 1993 C.W.
Permission to use, copy, modify, and distribute this software is freely granted, provided that the above copyright notice, this notice and the following disclaimer are preserved with no changes. THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. (11) Christopher G. Demetriou Copyright (c) 2001 Christopher G. Demetriou All rights reserved.
So that all may benefit from your experience, please report any problems or suggestions about this software to the SuperH Support Center via e-mail at softwaresupport@superh.com. SuperH, Inc. 405 River Oaks Parkway San Jose CA 95134 USA (13) Royal Institute of Technology Copyright (c) 1999 Kungliga Tekniska Högskolan (Royal Institute of Technology, Stockholm, Sweden). All rights reserved.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
All rights reserved. Redistribution and use in source and binary forms is permitted provided that the above copyright notice and following paragraph are duplicated in all such forms. This file is distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. (23) Intel (i960) Copyright (c) 1993 Intel Corporation Intel hereby grants you permission to copy, modify, and distribute this software and its documentation.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Copyright (c) 1998, M. Warner Losh All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (33) - Daniel Eischen (targets using libc/posix) Copyright (c) 2001 Daniel Eischen . All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * * Neither the name of MIPS Technologies Inc.
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
(3) When this software is redistributed in a form in which it cannot be used in the development of other software, embedded in devices, etc., one of the following conditions shall be satisfied. (a) The above copyright display, these terms of utilization, and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution (user's manual, etc.). (b) The TOPPERS Project shall be notified owing to a method in which the form of distribution is decided otherwise.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4.
(a) The above copyright display, these terms of utilization, and the following stipulation of no guarantee shall be inserted in documentation accompanying redistribution (user's manual, etc.). (4) The above copyright holder and the TOPPERS Project shall be exempt from responsibility for whatever damages occur either directly or indirectly through the utilization of this software. This software is something that is provided with no guarantee.
3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
DISCLAIMED.
Copyright (c) 1997-2012 University of Cambridge All rights reserved. PCRE JUST-IN-TIME COMPILATION SUPPORT ----------Written by: Zoltan Herczeg Email local part: hzmester Emain domain: freemail.hu Copyright(c) 2010-2012 Zoltan Herczeg All rights reserved. STACK-LESS JUST-IN-TIME COMPILER ----------Written by: Zoltan Herczeg Email local part: hzmester Emain domain: freemail.hu Copyright(c) 2009-2012 Zoltan Herczeg All rights reserved. THE C++ WRAPPER FUNCTIONS ----------Contributed by: Google Inc.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the University of Cambridge nor the name of Google Inc. nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission.
OPEN MARKET MAKES NO EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE SOFTWARE OR THE DOCUMENTATION, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org 5.
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. Parent topic: Notices Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
Copyright Attribution © 2015 Epson America, Inc.
PowerLite® Home Cinema 2040/2045 Quick Setup Before using the projector, make sure you read the safety instructions in the online User’s Guide. Audio Out port If you have connected an HDMI video source, you can connect the projector to a set of external speakers or headphones through the Audio Out port. The connected device must be set to PCM output. The projector can be used to control the audio level. Connect the projector 3.5 mm stereo mini cable Choose from the following connections.
5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press Enter to select it. You can switch between projection sources and quickly access various adjustment options from this screen. 6 Your projector automatically adjusts images that look like or , or buttons on the projector to but if necessary you can press the correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries).
You can also automatically convert 2D HDMI content to 3D. To enable the 2D-to-3D Conversion option, press the Menu button on the projector or remote control. Select Signal and press Enter, then select 3D Setup and press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak, Medium, or Strong setting, then press Enter. See the online User’s Guide for more information on adjusting 3D images.
Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way, MS: 3-13, Long Beach, CA 90806 Telephone: (562) 981-3840 To find the Epson Authorized Reseller nearest you, please visit our website at: epson.com. To find the Epson Customer Care Center nearest you, please visit epson.com/support.
EasyMP Network Projection Operation Guide
Contents Introduction to EasyMP Network Projection............................................................................................. 7 EasyMP Network Projection Features.................................................................................................. 7 Display Options .................................................................................................................................... 7 Multi-Screen Display Function...................................................
Profiles for Search .................................................................................................................... Performing a Profile Search ...................................................................................................... Making a Profile ........................................................................................................................ Managing a Profile .......................................................................................
Error Messages when Searching for and Selecting Projectors...................................................... 76 Error Messages when Projecting................................................................................................... 78 Event ID List ....................................................................................................................................... 78 Screen Summary ...............................................................................................
Copyright Notice .......................................................................................................................... About Notations ........................................................................................................................... General Notice............................................................................................................................. Copyright Attribution ......................................................................
Introduction to EasyMP Network Projection See the information here to learn more about EasyMP Network Projection software. EasyMP Network Projection Features Display Options Connection Modes EasyMP Network Projection Features You can use EasyMP Network Projection software to project images from your computer to the projector over a network.
Distribution Function Parent topic: Introduction to EasyMP Network Projection Multi-Screen Display Function You can project different images from up to four projectors that are connected to one computer. This allows you to project complex data, such as a business report, in an extra-wide landscape format. Parent topic: Display Options Related topics Projecting Images Using the Multi-Screen Display Function Movie Sending Mode You can play movies smoothly by sending movie files directly to the projector.
Presentation Mode You can project a PowerPoint slide show from your computer without displaying any other distracting computer content. While using Presentation Mode, a black screen is projected when the PowerPoint slide show is not playing. Parent topic: Display Options Related tasks Projecting Only a PowerPoint Slide Show Distribution Function You can project the same computer image simultaneously from up to four projectors connected to the same network.
Connection Modes You can use the following methods to connect a computer to a projector over a network by using EasyMP Network Projection. Quick Connection Mode Advanced Connection Mode Parent topic: Introduction to EasyMP Network Projection Quick Connection Mode You can connect the projector and the computer directly using wireless communication. This allows you to project the computer screen without making any complicated network settings.
Advanced Connection Mode You can connect the projector and the computer using an existing network system. To use Advanced Connection Mode, you need to connect the projector to an access point or to a network hub.
Setting Up EasyMP Network Projection for the First Time Follow these instructions before connecting a computer to the projector over a network. Installing the Software Setting Up the Projector Installing the Software Install EasyMP Network Projection from the EPSON Projector Software CD-ROM supplied with your projector (if available) or by downloading it from the Epson Web site.
Requirement Windows Mac Operating system Windows XP Mac OS X • Professional (32-bit) • 10.4.x (32-bit) • Home Edition (32-bit) • 10.5.1 or later (32-bit) • Tablet PC Edition (32-bit) • 10.6.x (32- and 64-bit) Windows Vista • 10.7.x (32- and 64-bit) • Ultimate (32-bit) • 10.8.x (64-bit) • Enterprise (32-bit) • 10.9.x (64-bit) • Business (32-bit) • 10.10.x (64-bit) • Home Premium (32-bit) (Mac OS X 10.4.11, 10.5.8, 10.6.8, 10.7.3, 10.8.0, 10.9.0, or 10.10.
Requirement Windows Mac CPU Mobile Pentium III 1.2 GHz or faster Power PC G3 900 MHz or faster (Pentium M 1.6 GHz or faster recommended) (CoreDuo 1.
4. If the installer does not start automatically, open the CD-ROM drive from My Computer (or Computer), and then double-click InstallNavi.exe or EMP_NSCInst.exe. 5. Follow the on-screen instructions to install. Parent topic: Installing the Software Installing EasyMP Network Projection (Mac OS X) Install EasyMP Network Projection on your computer. 1. Turn on your computer. 2. Make sure all running applications are closed. 3.
Depending on your projector, some connection methods may not be available. See the User's Guide supplied with the projector for more details. • To connect the projector to the computer directly using wireless communication: Use Quick Connection Mode. • To connect the projector to the computer using a wireless network system: Use Advanced Connection Mode.
Use Advanced Connection Mode. Parent topic: Setting Up the Projector Related tasks Setting Up a Projector to Connect in Quick Connection Mode Setting Up a Projector to Connect in Advanced Connection Mode (Wireless) Setting Up a Projector to Connect in Advanced Connection Mode (Wired) Setting Up a Projector to Connect in Quick Connection Mode To connect a computer directly to the projector using wireless communication, you need to select network settings on the computer and the projector. 1.
A screen like one of the following is displayed. 6. Select On for Wireless LAN Power. 7. Select Quick for Connection Mode. 8. Select other options as necessary for your network. See the User's Guide supplied with the projector for more details. 9. Select security settings on the Security menu as necessary for your network. Check with your network administrator for more information on making the correct settings. 10.
3. Install the wireless LAN unit in the projector, if necessary. See the User's Guide supplied with the projector for more details. 4. Turn on the projector. 5. Press the Menu button on the remote control or the control panel, select the Network menu, and then select Network Configuration. 6. Select Wireless LAN. A screen like one of the following is displayed. 7. Select On for Wireless LAN Power.
Setting Up a Projector to Connect in Advanced Connection Mode (Wired) To connect a computer to the projector using a wired LAN, you need to select network settings on the computer and the projector. 1. Contact your network administrator and check that DHCP is available under the current network environment. Note: If DHCP is not available, write down the following values that are available for your projector. • IP Address • Subnet Mask • Gateway Address 2. Connect the computer to the network.
7. Select IP settings as necessary. • DHCP is available: Set DHCP to On. • DHCP is not available: Set DHCP to Off and enter the projector's IP Address, Subnet Mask, and Gateway Address values as necessary. 8. When you have finished making settings, select Setup Complete or Complete, and follow the onscreen instructions to save your settings and exit the menus.
Connecting to the Projector and Projecting Images Follow these instructions to connect the computer and the projector over a network, and to project images from your computer's screen using the projector. Make sure you have already set up EasyMP Network Projection and selected a connection mode for the projector.
1. Press the LAN button on the remote control. The LAN standby screen is projected. 2. Start EasyMP Network Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection, and then click EasyMP Network Projection Ver.X.XX. • Windows 8.x: Navigate to the Apps screen and select EasyMP Network Projection Ver.X.XX. • Mac OS X: Double-click EasyMP Network Projection from the Applications folder.
3. Select Quick Connection Mode, and then click OK. The projector search results are displayed. 4. If the projector you want to connect to is not displayed in the search results, search for it using one of the following methods. • Automatic Search: Searches for the projector automatically. • Manual Search: Searches for the projector based on the SSID selected from a list. • Profile: Searches for the projector based on a previously saved profile. 5.
• Windows Vista, Windows 7, and Windows 8: Enter the keyword displayed on the LAN standby screen, and then click OK. When the following dialog box is displayed, enter the passphrase set on the projector, and then click Connect. Note: If you select Save the passphrase and don't show this dialog box again, the projector's SSID and passphrase are saved on the computer and this dialog box is not displayed the next time you connect. You do not have to enter the passphrase again.
When a connection is established, the computer screen is projected. The following EasyMP Network Projection toolbar is displayed on the computer screen. Note: When a connection is established, the input source for the projector automatically switches to the LAN source if no other signal is being input. If the input source does not automatically switch to the LAN source, press the LAN button.
The LAN standby screen is projected. 2. Start EasyMP Network Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection, and then click EasyMP Network Projection Ver.X.XX. • Windows 8.x: Navigate to the Apps screen and select EasyMP Network Projection Ver.X.XX. • Mac OS X: Double-click EasyMP Network Projection from the Applications folder. 3. Select Advanced Connection Mode, and then click OK.
The projector search results are displayed. 4. If the projector you want to connect to is not displayed in the search results, search for it using one of the following methods. • Automatic Search: Searches for the projector automatically. • Manual Search: Searches for the projector based on a specified IP address or projector name. • Profile: Searches for the projector based on a previously saved profile. 5. Select the projector you want to connect to, and then click Connect.
Note: Make sure you connect a computer to the network. 1. Press the LAN button on the remote control. The LAN standby screen is projected. 2. Start EasyMP Network Projection. • Windows XP, Windows Vista, and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection, and then click EasyMP Network Projection Ver.X.XX. • Windows 8.x: Navigate to the Apps screen and select EasyMP Network Projection Ver.X.XX.
3. Select Advanced Connection Mode, and then click OK. The projector search results are displayed. 4. If the projector you want to connect to is not displayed in the search results, search for it using one of the following methods. • Automatic Search: Searches for the projector automatically. • Manual Search: Searches for the projector based on a specified IP address or projector name. • Profile: Searches for the projector based on a previously saved profile. 5.
Note: When a connection is established, the input source for the projector automatically switches to the LAN source if no other signal is being input. If the input source does not automatically switch to the LAN source, press the LAN button.
If the projector you want to connect to is not found automatically, you can search for the target projector by specifying the SSID, IP address, or a projector name. By using Advanced Connection Mode, you can search for projectors at remote locations on a different subnet. • Searching for Network Projectors Using a Profile You can save network projector information as a profile, and then specify the profile to search for the same projector instead of providing projector details each time you search.
Related concepts Search Methods Related tasks Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name Performing a Profile Search Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name If the projector you want to connect to is not found automatically, you can search for the target projector by specifying the relevant details. In Quick Connection Mode, you can search for the projector by using an SSID.
2. Specify one of the following items, and then click OK. • Quick Connection Mode: Select the SSID for the projector you want to connect to from the list. • Advanced Connection Mode: Enter the IP address or the projector name for the projector you want to connect to. The search results are displayed.
Profiles for Search Performing a Profile Search Making a Profile Managing a Profile Parent topic: Selecting the Projector Search Method Profiles for Search You can save information for a network projector as a profile. A profile is a file containing all of the projector's information, such as the projector name, IP address, and SSID. By using a profile, you can easily search for saved projectors instead of providing projector details.
2. Select the projector you want to connect to from the list. The search results are displayed. Parent topic: Searching for Network Projectors Using a Profile Making a Profile After searching for a projector, you can save the projector details as a profile using a memorable name that you can search for easily later. 1. While the projector is displayed on the following screen, click Save in the profile.
2. Enter a Profile name, and then click Add. 3. Perform the following operations as necessary. • An overwrite confirmation screen is displayed: If you are prompted to confirm whether or not you want to overwrite, select Save as to save a profile with a different name. • A folder selection screen is displayed: If you have created a folder for profiles, one of the following screens is displayed. After entering the Profile name and selecting the Save in destination, click Add.
Windows: Mac OS X: 38
The projector information is saved in the profile. Parent topic: Searching for Network Projectors Using a Profile Managing a Profile You can change the name and the organization of your profiles. 1. Click Set options on the following screen. The Set options screen is displayed.
2. Click Edit profile. The Edit profile screen is displayed.
3. Edit the profiles as necessary. 1 Displays the profiles. You can drag and drop profiles and folders to change the folder structure. 2 Duplicates the profile. The copied profile is saved in the same folder as the original with the same name. 3 Deletes the profile and the folder. 4 Displays the Rename dialog box to rename the folder or the profile. You can enter up to 32 characters in the Rename dialog box. 5 Exports the profile. Exported profiles can be used as backup files.
8 Displays the projectors saved in the profile. To delete a specific projector from the profile, select the projector and then press the Delete button. When all projector information has been deleted, the profile is also deleted. 4. Click OK. Your edits are saved and the Edit profile screen closes. Parent topic: Searching for Network Projectors Using a Profile Controlling the Projected Display Follow these instructions to use the toolbar to control the screen being projected.
2. If you are connected to multiple projectors, click the projector you want to control. button on the toolbar and select the 3. Perform one of the following operations. • Stop: Click the button on the toolbar. The projected image stops. A black screen is projected while stopped. • Pause: Click the button on the toolbar. The projected image pauses. The paused image is projected. • A/V Mute: Click the that is displayed.
1. Make sure the toolbar display is set to Full. 2. If you are connected to multiple projectors, click the projector you want to control. 3. Click the button on the toolbar and select the button on the toolbar. 4. Perform one of the following operations. • Switch to a computer source: Click the • Switch to a video source: Click the button. button. Parent topic: Controlling the Projected Display Finishing Projecting Images You can finish projecting images by using the toolbar.
Using Additional Functions Follow these instructions to use additional EasyMP Network Projection functions that may be useful during a meeting or presentation.
1. Make sure the toolbar display is set to Full. 2. If you are connected to multiple projectors, click the projector you want to control. 3. Click the button on the toolbar and select the button on the toolbar. 4. Run the PowerPoint slide show on your computer. The PowerPoint slide show is projected. 5. To stop Presentation Mode, click the button again. Parent topic: Using Additional Functions Projecting Movies You can project movies smoothly by using Movie Sending Mode.
Supported Movie Files The following movie file types are supported. Note: You cannot project files protected by digital rights management (DRM). File Type (Extension) Movie Codec Audio Codec Recording Quality .mpg MPEG-2 MPEG-1 Layer 1/2 Maximum frame rate: 30 fps .mpeg .mp4 .wmv You can play MPEG contents without audio. Linear PCM and AC-3 are not supported. MPEG-4 ASP MPEG-4 H.264/MPEG-4 AVC AAC-LC WMV9 WMA Maximum resolution: 1280 × 720 .
1. Make sure the toolbar display is set to Full. 2. Click the button on the toolber. The projector selection screen is displayed. 3. Select the projector, and then click OK. The Movie Sending Mode screen is displayed.
4. Click Select File. 5. Select the movie file you want to play, and then click Open.
The Movie Sending Mode screen is displayed again. The selected file is displayed in the Movie file list. If you click Select file again, the Movie file list currently displayed is cleared, and then only the files you select later are displayed in the list. 6. Control movie play back using the Movie Sending Mode screen. 1 Displays the current point in the movie file. You can drag and drop the slider to the point where you want to start playing. 2 Plays the file. 3 Pauses play back. 4 Stops play back.
Multi-Screen Display Examples Setting Up Multi-Screen Display Parent topic: Using Additional Functions Multi-Screen Display Examples By using the multi-screen display function, you can project images in the following display arrangements. Note: • For Windows, you can set virtual display drivers and project each image from the projector. Virtual display drivers are not available for Windows Vista, Windows 7, Windows 8, and Windows 8.1.
If you want to project two different images from your computer to two projectors, you can assign the additional display as shown below.
If you want to access two different images or views on your computer but project only one image to the projector, you can assign the additional display as shown below. 1 Actual monitor image: PowerPoint file presenter tools 2 Additional display image: Slide show using a PowerPoint file Parent topic: Projecting Images Using the Multi-Screen Display Function Setting Up Multi-Screen Display Follow these instructions to set up multi-screen display.
Arranging the Multi-Screen Display (Mac OS X) Projecting Images to the Arranged Multi-Screen Display Parent topic: Projecting Images Using the Multi-Screen Display Function Enabling the Virtual Display Driver (Windows) Before using the multi-screen display function, you need to enable the virtual display driver for Windows. Note: If you have already enabled the virtual display while installing EasyMP Network Projection, you do not need to enable it again. 1.
The virtual display drivers are enabled and the display may flicker. When the procedure is complete, the Add-Remove Virtual Display screen closes. Note: If the virtual display driver has been enabled so that the mouse pointer can be moved outside the limits of the screen, there may be occasions when you lose track of the location of the pointer.
5. Select Use multi-display.
Display layout and Display properties options are added at the bottom of the screen. 6. Click Display properties.
The Display Properties screen is displayed. 7. Click the Settings tab.
8. Drag the displayed monitor icon and place it where you want the additional image to appear. In the following example, the actual monitor (1) is placed on the left, while the additional monitor (3) is placed on the right. Note: • When the PC has multiple display output terminals, the numbers assigned to the virtual terminals are sequential to those of the physical terminals. • When an external monitor is connected as a secondary monitor, the image for that screen cannot be projected.
When the monitor icons have been arranged, displays are connected as shown in this image. 9. Click OK to close the Display Properties screen. Parent topic: Setting Up Multi-Screen Display Arranging the Multi-Screen Display (Mac OS X) You can arrange the position of each display. 1. Connect an external monitor to the computer. 2. Check the following items when connecting over a wireless LAN and modify the settings as necessary.
5. Select Use multi-display. Display layout and Display preferences options are added at the bottom of the screen.
6. Click Display preferences. The Display setting screen is displayed. 7. Click Arrangement.
8. Clear Mirror Displays. 9. Drag the displayed monitor icon and place it where you want the additional image to appear. 10. Close the Display setting screen.
Projecting Images to the Arranged Multi-Screen Display After setting up multi-screen display, you can assign the images you want to project to each screen. 1. Open the file you want to project. 2. Drag the window to the desired display, and assign where the image is to be projected. 3. Select the projector and the number you want to assign from Display to set which image you want to project from which projector.
4. Click Connect. The image assigned to each projector is projected. Note: If you use a virtual display on Windows, you cannot view the image being sent to a virtual display on the computer. To adjust the image on the virtual display, check the projected image.
perform mouse-based operations on the virtual display, move the mouse pointer in the direction of the virtual display so that the pointer appears on the virtual display. 5. To end projection for multi-screen display, click Disconnect on the toolbar. Parent topic: Setting Up Multi-Screen Display Projecting One Computer Screen from Multiple Projectors You can project one computer screen from up to four projectors simultaneously.
The same image is projected from multiple projectors.
Solving Problems See the following sections to check for solutions to problems you may have using EasyMP Network Projection. Solving Network Connection Problems Solving Problems During Projection Error Messages List Event ID List Solving Network Connection Problems Try these solutions depending on your network environment.
• Set DHCP to Off. Go to Network > Network Configuration > Wireless LAN > DHCP or Network > Network Configuration > Wireless LAN > IP Settings > DHCP. • Set Wireless LAN Power to On. Go to Network > Network Configuration > Wireless LAN > Wireless LAN Power. • When you enable the security setting, set the same passphrase to the computer and the projector. • Close network settings on the projector, and then return to the LAN standby screen. • Check the computer's network settings.
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wireless) When you cannot connect the computer and the projector using Advanced Connection Mode over a wireless network, try the following solutions. If you cannot resolve the problem, contact your network administrator. • Check the status of the external devices used for the network connection or the environment in which the network devices and the projector are located.
• Check the computer's network settings. • If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your computer. • Enable the wireless LAN setting or AirPort on your computer. • Connect to the access point to which the projector is connected. • Turn off the firewall. If you do not want to turn it off, register the firewall as an exception. Make the necessary settings to open the ports. The ports used by this software are "3620", "3621", and "3629".
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired) When you cannot connect the computer and the projector using Advanced Connection Mode over a wired network, try the following solutions. If you cannot resolve the problem, contact your network administrator. • Check the status of the external devices used for the network connection or the environment in which the network devices and the projector are located. • Connect the network cable securely.
• If you cannot find the projector you want to connect to using Automatic search, select Manual search to specify the IP address. • If another user has established a connection and the projected image remains as it is, you can connect by interrupting the current connection. If a Projector Keyword is set for the projector but you do not know the keyword, restart the projector and check the keyword displayed on the LAN standby screen.
• If the PowerPoint slide show is not displayed where you want when using the multi-screen display function, use PowerPoint 2003 or later to make settings and use two or more virtual displays. Or, limit the number of displays to one before displaying the PowerPoint slide show.
• If the volume for the computer is set to the minimum while the projector volume is set to the maximum, the noise may be mixed. Turn up the computer's volume and turn down the projector's volume. Parent topic: Solving Problems During Projection Related references Set options - Audio Output Error Messages List When an error occurs, an error message is displayed on your computer screen. Check for your message and follow the instructions here to clear the error.
Error Messages Remedy EasyMP Network Projection initialization failed. Restart EasyMP Network Projection. If the message is still displayed, uninstall and then reinstall EasyMP Network Projection. Network adapter information could not be obtained. Check the following items. • A network adapter is installed on the computer. • The driver for the network adapter being used is installed on the computer. • The network adapter is enabled.
Error Messages Remedy Connection to the projector failed. Try connecting again. If you still cannot connect to the projector, check the network settings on the computer and the network settings for the projector. The keyword does not match. Re-enter the keyword displayed on the projector screen. Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword. Connection failed due to keyword mismatch. Enter the keyword displayed on the projector screen.
Installing EasyMP Network Projection (Mac OS X) Error Messages when Projecting Error Messages Remedy XXXXXX was disconnected. Try connecting again. If you still cannot connect to the projector, check the network settings on the computer and the network settings for the projector. To output audio from the projector, restart applications such as PowerPoint or Windows Media Player. Restart PowerPoint or Windows Media Player. Audio is then output from the projector.
Event ID Cause Remedy 04FE The network software ended unexpectedly. Check the status of network communications. Restart the projector. 04FF A system error occurred in the projector. Restart the projector. 0891 Cannot find an access point with the same SSID. Set the computer, the access point, and the projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Check that the wireless LAN security settings are correct. 0893 The WEP/TKIP/AES encryption type does not match.
Event ID Cause Remedy 0B01 The built-in storage could not be detected correctly. Perform Delete All Internal Data. When the internal storage is deleted correctly, plugin the power cord for the projector and turn it on. If it is not deleted correctly, contact Epson as described in your projector User's Guide. Go to Extended > Whiteboard Settings > Internal Storage. 0BFF An error has occurred in the Whiteboard function. Parent topic: Solving Problems 80 Restart the projector.
Screen Summary See these sections for more information about the EasyMP Network Projection screens. Select Connection Mode Screen Search and Connect Screen Profiles Set options Toolbar Movie Sending Mode Add-Remove Virtual Display Select Connection Mode Screen When you start EasyMP Network Projection, the select connection mode screen is displayed. 1 Select the connection mode. 2 Select to always connect using the selected connection mode.
Parent topic: Screen Summary Search and Connect Screen When you start EasyMP Network Projection and select a connection mode, one of the following screens is displayed depending on the connection mode you selected.
• When selecting Advanced Connection Mode 1 In Quick Connection Mode, searches for the projectors based on the SSID. Automatic search 2 In Advanced Connection Mode, searches for the available projectors on the network system to which the computer is connected. In Quick Connection Mode, searches for the projector by using the SSID. Manual search In Advanced Conncection Mode, searches for the projector by using an IP address or a projector name.
3 Status Indicates the status for detected projectors as shown below. Available. Standby Available. When you click Connect, the computer currently connected is disconnected and your computer is connected. Busy Cannot be selected. Disable interrupt connection is set on another computer that is already connected. Busy (Disable interrupt connection) Currently in use by another application The projector's Configuration menu is open.
7 Use multi-display Select when using the multi-screen display function. When this is selected, Display layout and Display properties (Display preferences) are displayed at the bottom of the screen. 8 Troubleshooting Displays the EasyMP Network Projection Troubleshooting screen. 9 Connect Connects to the projector you selected from the search results list. When a connection is made with a projector, a toolbar is displayed.
Profiles See these sections for more information about the screens for saving and managing profiles. Save in the profile Edit profile Parent topic: Screen Summary Save in the profile When you search for projectors and click Save in the profile on the search and connect screen, one of the following screens is displayed. • If no folder has been created.
• If you have created a folder for profiles. 1 Profile name Enter the profile name. 2 Save in Select the folder where you want to save the profile. 3 Add Registers the projector information in the profile.
Edit profile When you click Edit profile on the Set options screen, the Edit profile screen is displayed. 1 Profile Displays the profile. You can drag and drop profiles and folders to change the folder structure. 2 Copy Duplicates the profile. The copied profile is saved in the same folder as the original with the same name. 3 Delete Deletes the profile and the folder. 4 Rename Displays the Rename dialog box to rename the folder or the profile.
8 Projector name Displays the projector information saved in the profile. SSID or IP address Delete Deletes the selected projector from the profile. When all projector information is deleted, the profile is also deleted. Parent topic: Profiles Related tasks Making a Profile Set options When you click Set options on the EasyMP Network Projection search and connect screen, the Set options screen is displayed. Note: You can also access Set options by clicking the button on the toolbar.
Set options - General settings When you click the General settings tab on the Set options screen, the following screen is displayed. Use full-screen video transfer Windows XP only Plays back a movie file at full screen. If the projector does not support movie sending, this function cannot be set. Encrypt communications Select to encrypt and transmit data. Even if data is intercepted, it cannot be decrypted. When using Quick Connection Mode, make sure you always select this checkbox.
Make the movement of the mouse pointer smooth Use Easy Interactive Tools Windows XP/Windows Vista/Windows 7 only Select to prevent the mouse pointer from flickering when Transfer layered window is selected in Adjust performance. (If Windows Aero is selected as the theme for Windows Vista and Windows 7, this setting turns off Windows Aero.) Select to use Easy Interactive Tools with EasyMP Network Projection. This setting is synchronized with Transfer layered window in Adjust performance.
Restore Defaults Resets all adjustment values for Set options to their default settings, except for Edit profile and Switch LAN in General settings.
Lower the resolution and transfer Available only for projectors with a resolution of WUXGA (1920 × 1200). Select to reduce the size of the data to be transferred to the projector by lowering the resolution. Use this option on a slow network or if it takes too long to display the image or projection is interrupted.
Set options - Audio Output When you click the Audio Output tab on the Set options screen, the following screen is displayed. Output audio from the projector Select to output the computer's audio from the projector. Clear to output audio from the computer. However, when playing movies with audio in Movie Sending Mode, audio is always output from the projector regardless of this setting. Note: Audio can only be transferred to one projector. Audio cannot be transferred when connected to multiple projectors.
Toolbar After EasyMP Network Projection starts and a connection is made with the projector, the toolbar is displayed on the computer screen. You can use this toolbar to operate and make settings for the projector, and to disconnect the network connection. Displays the Select target projector screen. Select target projector Click to limit the projectors operated from the toolbar when projecting from multiple projectors using the distribution function or multi-screen display function.
Displays the multi-screen preview screen. Screen Preview Click to display a preview with the settings you have made. Click each display to enlarge each Screen Preview to full-screen. Displays the Set options screen. Set options Click to adjust the transmission performance during the transfer of computer images. Starts Movie Sending Mode. (Supported models only) Movie Sending Mode Disconnects the connection to the projector.
Related topics Set options Projecting Movies Select target projector When you click the button on the toolbar, the following screen is displayed. 1 – Select the projector you want to control. 2 No. Indicates the number assigned to the projector. This number appears under the icon to indicate the number of the projector that you can control from the toolbar. 3 Projector name Displays the projector's name.
5 – Indicates the following status of the projector. Projection has stopped. Currently projecting. Projection has been paused. During the Presentation Mode. During the Movie Sending Mode. Parent topic: Toolbar Related references Search and Connect Screen Related tasks Hiding Computer Operations Projecting Only a PowerPoint Slide Show Related topics Projecting Movies Projector control When you click the button on the toolbar, the following toolbar is displayed.
Hides and mutes the video and audio. A/V Mute Changes to images from the input port to which the computer or USB device are connected. Switch PC source Changes to images from the video input port.
Movie Sending Mode When you click the button on the toolbar and select a projector, the following screen is displayed. 1 Movie file list Displays a list of selected movie files. 2 — Displays the current point in the movie file. You can drag and drop the slider to the point where you want to start playing. 3 Plays the file. 4 Pauses play back. 5 Stops play back.
6 Plays the current file from the beginning. 7 Plays the next file from the beginning. 8 Plays repeatedly from the first file in the list. You cannot repeat one specific file if there are multiple files in the list. Parent topic: Screen Summary Related topics Projecting Movies Add-Remove Virtual Display During installation and startup of EasyMP Network Projection on Windows, the Add-Remove Virtual Display screen is displayed.
1 Virtual Display 1 to 4 Select the virtual display you want to use for the multi-screen display function. You can select up to four monitors.
Appendix See these sections to learn more about EasyMP Network Projection software. Updating and Uninstalling the Software Supported Resolutions and Colors Limitations Notices Updating and Uninstalling the Software Follow these instructions to update or uninstall EasyMP Network Projection.
• Windows Vista and Windows 7: Click Uninstall a program from the Programs category. 5. Select EasyMP Network Projection, and then do one of the following. • Windows XP: Click Change/Remove. • Windows Vista and Windows 7: Click Uninstall/Change. 6. Follow the on-screen instructions. Parent topic: Updating and Uninstalling the Software Uninstalling EasyMP Network Projection (Windows 8) For Windows 8.x, follow the instructions below to uninstall EasyMP Network Projection.
Supported Resolutions and Colors Check these sections for the computer screen resolutions and the number of colors that EasyMP Network Projection can project. Supported Resolutions Display Color Parent topic: Appendix Supported Resolutions The following computer screen resolutions can be projected. You cannot connect to a computer with a resolution greater than WUXGA.
Windows Mac OS X 16-bit color Approx. 32,000 colors (16-bit) 32-bit color Approx. 16.7 million colors (32-bit) The operational guarantee for multi-screen display is 16-bit and 32-bit color. Parent topic: Supported Resolutions and Colors Limitations Check these sections for restrictions applied when projecting computer images while using EasyMP Network Projection.
Because the toolbar is not displayed, you cannot change the Theme (effects) while playing a slide show, regardless of the Windows Experience Index rating. Once simple mode has started, you cannot change modes while Windows Photo Gallery or Windows Live Photo Gallery is running, even if you close EasyMP Network Projection. Restart Windows Photo Gallery or Windows Live Photo Gallery. • You cannot play movies.
Limitations when Projecting from Windows Media Center Note the following limitations when projecting from Windows Media Center. • You cannot project images in full screen mode using Windows Media Center. Switch to window display mode to project the images. • If audio stops during playback when transferring audio from the computer to the projector using EasyMP Network Projection, try restarting the application you are using.
About Notations • Microsoft® Windows® XP Professional operating system • Microsoft® Windows® XP Home Edition operating system • Microsoft® Windows Vista® operating system • Microsoft® Windows® 7 operating system • Microsoft® Windows® 8 operating system • Microsoft® Windows® 8.1 operating system In this guide, the operating systems above are referred to as "Windows XP," "Windows Vista," "Windows 7," "Windows 8", and "Windows 8.1.
Software Copyright: This product uses free software as well as software to which this company holds the rights. © 2015 Epson America, Inc.
SPECIFICATION SHEET Projectors Home Cinema 2045 Wireless 3D 1080p 3LCD Projector Home Theater 100" Full HD image at 9 feet The Full HD 1080p home theater projector with wireless streaming. Up to 3x Higher Color Brightness, and reliable performance — 3LCD, 3-chip technology1 One measurement of brightness is not enough — look for both high color brightness and high white brightness.
Projectors Home Cinema 2045 Wireless 3D 1080p 3LCD Projector Specifications Interfaces Projection Lens Type Optical Zoom (Manual) / Focus (Manual) F-number 1.58 – 1.72 Focal Length 16.9 – 20.28 mm Zoom Ratio 1.0 – 1.2 Manual Other Display Performance 1920 x 1080 native 1080p; HD, 2D, 3D Color Modes Dynamic, Bright Cinema, Natural, Cinema, 3D Dynamic, 3D Cinema Input Signal Composite: NTSC / NTSC4.
• • • • • • • • • • • • • • • • • • • • • • • • • • • EXCEED YOUR VISION EXTRA CARESM HOME SERVICE Epson offers its projector customers Extra Care Home Service, which runs concurrently with the basic warranty, based on the terms and conditions described in your Limited Warranty. IT'S LIKE HAVING A TECHNICAL EXPERT WITH YOU AT HOME. IT COULD HAPPEN.
ALL YOU NEED IS A CREDIT CARD. To provide this service, all we need is your MasterCard, Visa, Discover Card, or American Express card number as a security deposit** for the return of your original unit. Original units not returned will be charged to your credit card. If you choose not to use a credit card, please let the technical support representative know and he or she will refer you to your nearest authorized service center for carry-in service. IT'S FREE.
