Owners manual

Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an

angle.

If you project from a table or portable cart, be sure to select the correct Projection option in the

projector's menu system.

Parent topic: Projector Placement

Related references

Projector Setup Settings - Extended Menu

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the

image. The image size increases the farther the projector is from the screen, but can vary depending on

the zoom factor, aspect ratio, and other settings.

Refer to the tables in the Installation Guide included with your mount to determine approximately how far

to place the projector from the screen based on the size of the projected image. (Conversion figures may

have been rounded up or down.) You can also use the projector Throw Distance Calculator at

epson.com/support (U.S.) or epson.ca/support (Canada).

Parent topic: Projector Placement

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.