Quick Reference Guide

ManualsBrandsEpson ManualsProjectorsPowerlite Pro G7500U WUXGA - V11H750020

EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson

Corporation. PrivateLine is a registered trademark of Epson America, Inc.

OS X is a trademark of Apple Inc., registered in the U.S. and other countries.

HDBase™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

CPD-51149

Printed in XXXXXX

Remote Control Map

Turn the projector on

Illuminate buttons temporarily

Automatically adjust

computer image

Change the aspect ratio

Open menus assigned by user

Zoom in or out on part of an image

Correct image distortion

Save and apply presets

Port to connect remote

control cable

Control one or all projectors

Hold down and use numeric keys

to select projector to control

Replacement Parts

Product Part number

Replacement lamp (ELPLP93) V13H010L93

Air filter (ELPAF30) V13H134A30

You can purchase replacement parts from an Epson

authorized reseller. See “Where to Get Help” inside this card

for more information.

Hold down and use numeric keys

to enter numbers

Select color modes

Turn the projector off

Select a source

Navigate through menu settings;

move pointer

Display a test pattern

Adjust the image position

Open projector menus

Select menu settings; left

mouse button

Temporarily turn off display

and audio

Move to next or previous

image when projecting from a

computer over the network

Control volume

Cancel current operation

or return to previous menu;

right mouse button

Display the Info menu

Switch image sources

Freeze the image

Split the screen between two inputs

Adjust the focus

Change the image size

Reset menu settings to their

default value

Display the Home screen

Note: SDI is not available on these products.

Pro G7000W/G7100/G7200W/G7400U/

G7500U/G7805/G7905U

Quick Reference

This Quick Reference card gives brief instructions on connecting your

projector and using common features. For details, see the online User’s

Guide.

Stereo mini jack cable

5BNC-to-VGA cable

VGA-to-component cable

VGA cable

HDMI cable

Ethernet cable

DVI cable

BNC-to-component cable

Summary of content (6 pages)

PAGE 1
Remote Control Map Replacement Parts Turn the projector on Illuminate buttons temporarily Turn the projector off Switch image sources Product Part number Replacement lamp (ELPLP93) V13H010L93 Air filter (ELPAF30) V13H134A30 Adjust the focus Temporarily turn off display and audio Move to next or previous image when projecting from a computer over the network Control volume Display the Info menu Reset menu settings to their default value Zoom in or out on part of an image Correct image distortio
PAGE 2
Turning the Projector On 1. T urn on your computer or image source. 2. Remove the lens cover. 3. Press the On button. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4.
PAGE 3
Turning the Projector On 1. T urn on your computer or image source. 2. Remove the lens cover. 3. Press the On button. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4.
PAGE 4
Turning the Projector On 1. T urn on your computer or image source. 2. Remove the lens cover. 3. Press the On button. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4.
PAGE 5
Remote Control Map Replacement Parts Turn the projector on Illuminate buttons temporarily Turn the projector off Switch image sources Product Part number Replacement lamp (ELPLP93) V13H010L93 Air filter (ELPAF30) V13H134A30 Adjust the focus Temporarily turn off display and audio Move to next or previous image when projecting from a computer over the network Control volume Display the Info menu Reset menu settings to their default value Zoom in or out on part of an image Correct image distortio
PAGE 6
Remote Control Map Replacement Parts Turn the projector on Illuminate buttons temporarily Turn the projector off Switch image sources Product Part number Replacement lamp (ELPLP93) V13H010L93 Air filter (ELPAF30) V13H134A30 Adjust the focus Temporarily turn off display and audio Move to next or previous image when projecting from a computer over the network Control volume Display the Info menu Reset menu settings to their default value Zoom in or out on part of an image Correct image distortio