Owner's Manual

3
Open the A/V Mute slide all the way.
4
Press the power button. The projector beeps, the Status light flashes
blue, and then stays on.
Note: To shut down the projector, press the power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
5
Use the arrow buttons on the remote control to highlight any options
on the Home screen, then press
to select it. You can switch between
projection sources and quickly access various adjustment options from
this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or the remote
control. Select Extended and press
. Select Language and press .
Select your language and press
. Press the Menu button to exit the
menu system.
Adjust the image
1
If you don’t see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the tips in “Troubleshooting” on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
PowerLite 740HD/1040: To reduce or enlarge the image, turn the
zoom ring.
PowerLite 640: To reduce or enlarge the image, press the T (reduce)
or W (enlarge) buttons on the projector.
PowerLite 740HD/1040
PowerLite 640
4
Turn the focus ring to sharpen the image.
PowerLite 740HD/1040
PowerLite 640
5
If your image looks like or , you’ve placed the projector off to
one side of the screen at an angle. Place the projector directly in front of
the center of the screen, facing the screen squarely. If you can’t move the
projector, use the horizontal keystone slider on the projector to correct
the image.
PowerLite 740HD/1040
PowerLite 640
6
Your projector automatically adjusts images that look like or ,
but if necessary you can press the
or buttons on the projector to
correct this.
Using the remote control
Make sure the batteries are installed as shown (two AA batteries).
Choose which source
to display
Turn projector
on and off
Access projector
menus
Turn off projector
display
Access the Home
screen
Navigate projector
menus
For more information on using the remote control, see the online
User’s Guide.