Owner's Manual

Note: When a connection is established, the input source for the projector automatically switches to the
LAN source if no other signal is being input. If the input source does not automatically switch to the LAN
source, press the LAN button.
Parent topic: Connection Methods
Related tasks
Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
Searching for Network Projectors Automatically
Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name
Performing a Profile Search
Selecting the Projector Search Method
You can select a suitable method to search for a projector depending on the status or location of the
projector you want to connect to.
Search Methods
Searching for Network Projectors Automatically
Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name
Searching for Network Projectors Using a Profile
Parent topic: Connecting to the Projector and Projecting Images
Search Methods
You can use one of the following methods to search for the projector you want to connect to. Choose the
best method depending on your environment.
• Searching for Network Projectors Automatically
You can automatically search for available projectors on the network.
Search results differ depending on the connection mode you use.
• Quick Connection Mode: Displays the SSID for available projectors.
• Advanced Connection Mode: Displays available projectors on the network. Searches are
performed only on the same subnet. Projectors on different subnets are not displayed in the search
results.
• Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name
31