Owner's Manual

• If you cannot find the projector you want to connect to using Automatic search, select Manual
search to specify the IP address.
• If another user has established a connection and the projected image remains as it is, you can
connect by interrupting the current connection.
If a Projector Keyword is set for the projector but you do not know the keyword, restart the projector
and check the keyword displayed on the LAN standby screen.
• If you cannot select or change the connection mode, select Display Connection Mode Selection
window on startup on the General settings tab from Set options. The select connection mode
screen is displayed after restarting the software.
Parent topic: Solving Network Connection Problems
Related references
Set options - General settings
Related tasks
Searching for Network Projectors by Specifying an SSID, IP Address, or Projector Name
Changing the Computer Projection Source
Solving Problems During Projection
Try these solutions depending on your situation.
Solutions When the Computer Screen is Not Displayed Properly
Solutions When the Screen is Not Projected Properly
Solutions When Audio is Not Played Properly
Parent topic: Solving Problems
Solutions When the Computer Screen is Not Displayed Properly
If there are any problems with the computer screen, try the following solutions.
• If the mouse pointer is not displayed on the computer screen, it may have been moved onto the virtual
display. Clear the virtual display checkbox on the Add-Remove Virtual Display screen. The mouse
pointer returns to the screen display area.
• When you cannot find some application screen after you start it, it may be running on the virtual
display. Clear the virtual display checkbox on the Add-Remove Virtual Display screen.
• If you start EasyMP Network Projection while PowerPoint is running, a slide show might not run. Make
sure PowerPoint is closed and then start EasyMP Network Projection and a slide show.
73