EasyMP Multi PC Projection Operation Guide v2.
Contents Introduction to EasyMP Multi PC Projection............................................................................................. 7 EasyMP Multi PC Projection Features ................................................................................................. 7 Connection to Various Devices........................................................................................................ 7 Four-Panel Display ..........................................................................
Profiles for Search .................................................................................................................... Performing a Profile Search ...................................................................................................... Registering a Profile.................................................................................................................. Exporting a Profile.........................................................................................
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired)...... 76 Solving Problems During Projection ................................................................................................... 77 Solutions When the Screen is Not Projected Properly................................................................... 78 Solutions When Audio is Not Played Properly ...............................................................................
Uninstalling EasyMP Multi PC Projection (Windows 8.x)............................................................. 117 Uninstalling EasyMP Multi PC Projection (OS X)......................................................................... 117 Supported Resolutions and Colors................................................................................................... 117 Supported Resolutions ...............................................................................................................
Introduction to EasyMP Multi PC Projection See the information here to learn more about EasyMP Multi PC Projection software. EasyMP Multi PC Projection Features EasyMP Multi PC Projection Features EasyMP Multi PC Projection is software that allows you to hold interactive meetings or lessons by projecting images from network projectors. You can use a variety of display options for your environment.
You can also hold remote meetings over a network by simultaneously projecting the same image on up to four projectors on the network. Parent topic: EasyMP Multi PC Projection Features Related tasks Connecting to Multiple Projectors (Mirroring) Related topics Connection Methods Four-Panel Display You can simultaneously display up to four screens in separate projected panels, which is useful in both business and educational environments.
For example, you can compare and analyze data while simultaneously projecting screens from multiple devices. In an educational environment, you can project lesson material on one part of the screen and student answers on another to enhance the learning experience.
You can share the projector with other users on the same network without having to change cable connections, allowing users to take turns giving presentations. Note: The projection control screen is available only on the Standard Edition of the software. Parent topic: EasyMP Multi PC Projection Features Related tasks Changing the Presenter Changing the Projection Position Moderator Function When using the moderator function, only one person plays a role of moderator who can control the projected display.
Note: This function is available only for supported models. Parent topic: EasyMP Multi PC Projection Features Related tasks Changing the Moderator Related topics Connection Methods Screen Delivery and Thumbnail Display Function You can distribute the currently projected screen images to the participant's devices.
thumbnails. This feature is suitable for environments where the moderator wants to provide questions for the participants to answer, and then select which answers or ideas to project in response. Note: This function is available only for supported models.
When you change the presenter, you can switch the projected screen by inserting the USB key to a new presenter's computer. Note: • This function is available only for supported models. See your projector User's Guide for more details. • You cannot use the USB key as a projector's wireless LAN module.
Setting Up the Software for the First Time Follow these instructions before connecting a computer to the projector over a network. Installing the Software Selecting Projector Network Settings Installing the Software Install EasyMP Multi PC Projection from the EPSON Projector Software CD-ROM supplied with your projector (if available) or by downloading it from the Epson Web site.
Requirement Windows Mac Operating system Windows Vista OS X • Ultimate (32-bit) • 10.7.x (32- and 64-bit) • Enterprise (32-bit) • 10.8.x (64-bit) • Business (32-bit) • 10.9.x (64-bit) • Home Premium (32-bit) • 10.10.x (64-bit) • Home Basic (32-bit) • 10.11.
Requirement Windows Mac CPU Intel Core2Duo or faster (Intel Core i5 or faster recommended) Memory 2GB or more (4GB or more recommended) Hard disk space 50 MB or more Display Resolution between 800 × 600 (SVGA) and 1920 × 1200 (WUXGA) 16-bit color or greater (approximately 32,000 display colors) Note: • Operation is not guaranteed for Windows Vista without any service packs installed, or Windows Vista Service Pack 1. • Operation is not guaranteed for Windows 7 without any service packs installed.
1. Turn on your computer. 2. Make sure all running applications are closed. 3. Do one of the following: • Insert the EPSON Projector Software CD-ROM into the computer (if available) and continue with these steps. • If you downloaded the software from the Epson Web site, follow the on-screen instructions to install the software. The installer starts automatically. 4. If the installer does not start automatically, open the CD-ROM drive from My Computer (or Computer), and then double-click EMP_MPPInst.exe. 5.
Recommended Wireless Environment for Multi PC Projection Setting Up a Projector to Connect in Quick Connection Mode Setting Up a Projector to Connect in Advanced Connection Mode (Wireless) Setting Up a Projector to Connect in Advanced Connection Mode (Wired) Parent topic: Setting Up the Software for the First Time Connection Methods for Various Network Environments You can choose a connection mode to suit your network environment.
• To connect the projector to the computer using a wireless network system: Use Advanced Connection Mode. • To connect the projector to the computer using a wired network system: Use Advanced Connection Mode.
Recommended Wireless Environment for Multi PC Projection When you connect multiple devices to a projector using the Quick connection mode, we recommend limiting the number of devices to six or less to maintain the projection performance. The number of devices that can connect to a projector at the same time differs depending on the wireless communication environment.
A screen like one of the following is displayed. 6. Turn on wireless LAN support. Note: The necessary settings vary depending on your projector. See your projector User's Guide for instructions. 7. Select Quick for Connection Mode. 8. Select other options as necessary for your network. See your projector User's Guide for instructions. 9. Select security settings on the Security menu as necessary for your network. Check with your network administrator for more information on making the correct settings. 10.
2. Connect the computer to the network. Note: To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. 3. Install the wireless LAN unit in the projector, if necessary. See your projector User's Guide for instructions. 4. Turn on the projector. 5. Press the Menu button on the remote control or the control panel, select the Network menu, and then select Network Configuration. 6. Select Wireless LAN. A screen like one of the following is displayed. 7.
Parent topic: Selecting Projector Network Settings Related tasks Connecting to the Projector from the Software over a Network System Setting Up a Projector to Connect in Advanced Connection Mode (Wired) To connect a computer to the projector using a wired LAN, you need to select network settings on the computer and the projector. 1. Contact your network administrator and check that DHCP is available under the current network environment.
A screen like one of the following is displayed. 7. Select IP settings as necessary. • DHCP is available: Set DHCP to On. • DHCP is not available: Set DHCP to Off and enter the projector's IP Address, Subnet Mask, and Gateway Address values as necessary. 8. When you have finished making settings, select Setup Complete or Complete, and follow the onscreen instructions to save your settings and exit the menus.
Connecting to the Projector and Projecting Images Follow these instructions to connect the computer and the projector over a network, and to project images from your computer's screen using the projector. Make sure you have already set up the software and selected a connection mode for the projector.
Note: Depending on your projector, some connection methods may not be available. See your projector User's Guide for more details. • All users can control the projected display and become presenters. (Holding discussions and interacting with other users in a business environment.
• Only one user is the moderator and has full control over the meeting using the moderator function. (Holding a class or lesson using the participants' computer screens in an educational environment.) Note: To start a meeting using the moderator function, one user must connect to the projector as the moderator and the other users must connect to the projector as participants.
Note: • When you use the Participant Edition of the software, you must connect the projector and a computer over a network system. • When you connect the projector and a computer directly using wireless communication, the connection between the computer and an access point is disconnected. • Make sure you turn on your computer's wireless communication function. 1. Press the LAN button or Source Search button on the remote control to switch the input source to LAN. The LAN standby screen is projected. 2.
3. Select Quick Connection Mode, and then click OK. 4. Search for the projector using one of the following methods. • Automatic Search: Searches for the projector automatically. • Profile: Searches for the projector based on a previously saved profile. The projector search results are displayed. 5. Select the projector you want to connect to from the Projector List, and then select one of the following options.
• You are the moderator user and you do not want other users to be able to interrupt the moderator presentation: Select Connect as a Moderator, or disable interrupt connections, and then click Join. Note: • The moderator function is available only for supported models and is available only on the Standard Edition of the software. • When one user connects as a moderator, the moderator function turns on.
7. When the following dialog box is displayed, enter the passphrase set on the projector, and then click Connect. Note: If you select Save the passphrase and don't show this dialog box again, the projector's SSID and passphrase are saved on the computer and this dialog box is not displayed the next time you connect. You do not have to enter the passphrase again.
If the projector's passphrase has not been changed from the default, the following dialog box is displayed. Change the passphrase from the projector's Network menu. When a connection is established, the computer screen is projected and the following toolbar is displayed on the computer screen. The computer screen for the user who connects first is projected in full screen mode.
• When using the moderator function, only the moderator can control the projected display.
The LAN standby screen is projected. 2. Start EasyMP Multi PC Projection. • Windows Vista and Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Multi PC Projection, and then click EasyMP Multi PC Projection Ver.X.XX. • Windows 8 and Windows 8.1: Navigate to the Apps screen and select EasyMP Multi PC Projection Ver.X.XX. • Windows 10: Select Start, select All apps, select EPSON Projector, and then select EasyMP Multi PC Projection.
3. Select Advanced Connection Mode, and then click OK. 4. Search for the projector using one of the following methods. • Automatic search: Searches for the projector automatically. • Manual search: Searches for the projector based on a specified IP address or projector name. • Profile: Searches for the projector based on a previously saved profile. The projector search results are displayed. 5.
• You are the moderator user and you do not want other users to be able to interrupt the moderator presentation: Select Connect as a Moderator, or disable interrupt connections, and then click Join. Note: • The moderator function is available only for supported models and is available only on the Standard Edition of the software. • When one user connects as a moderator, the moderator function turns on.
The computer screen for the user who connects first is projected in full screen mode. Users who connect later can project their own screen by clicking the button on the toolbar or can control the projected display from the projection control screen by clicking the button on the toolbar. Note: • When a connection is established, the input source for the projector automatically switches to the LAN source if no other signal is being input.
Search Methods You can use one of the following methods to search for the projector you want to connect to. Choose the best method depending on your environment. • Searching for Network Projectors Automatically You can automatically search for available projectors on the network. Search results differ depending on the connection mode you use. • Quick Connection Mode: Displays the SSID for available projectors. • Advanced Connection Mode: Displays available projectors on the network.
Click Automatic search on the search screen. The search results are displayed. When you click Refresh, the latest information is displayed. If you cannot find any projectors, try one of the other search methods.
1. Click Manual search on the search screen. 2. Enter the IP address or the projector name for the projector you want to connect to, and then click Search.
The search results are displayed. Parent topic: Selecting the Projector Search Method Searching for Network Projectors Using a Profile You can save network projector information as a profile, and then search for the same projector using the profile instead of specifying the projector details each time.
1. Click Profile on the search screen. 2. Double-click the folder or the projector icon for the profile you want to use from the list. The search results are displayed.
Parent topic: Searching for Network Projectors Using a Profile Related tasks Registering a Profile Registering a Profile After searching for a projector, you can save the projector details as a profile using a memorable name that you can search for easily later. Note: You cannot register a profile under the Shared Profile folder on the search screen. 1. While the projectors are displayed on the search screen, perform one of the following operations.
2. Enter the Projector file name, and select the folder where you want to save the profile, and then click OK. The profile is registered and the projector information is saved in the profile. Note: • The folder structure can be six folders deep. • Click Create New folder if you want to create a new folder. • To register a specific projector, you can drag and drop the projector from the Projector List to the folder under Profile. • You can drag and drop profiles and folders to change the folder structure.
Exporting a Profile You can export a profile and share it with other users allowing them to easily search for projectors and join a meeting. Note: You cannot export the profiles under the Shared Profile folder on the search screen. 1. On the search screen, right-click the folder containing the profile you want to share under Profile, and then click Export. The Save As screen is displayed. 2. Select where you want to save the profile (.mplist), and then click Save. The profile is exported.
Sharing a Profile over a Network You can share an exported profile with other users over a network so that any changed projector information is easily updated. The shared profile is read and updated automatically when EasyMP Multi PC Projection is started. 1. Place the profile (.mplist) in a shared network location such as a server. 2. Click Set options on the search screen. The Set options screen is displayed. 3. Click the User Settings tab. 4.
5. Click OK. The shared profile is read and the Set options screen closes. Note: The shared profile is read only and cannot be edited in EasyMP Multi PC Projection. Parent topic: Searching for Network Projectors Using a Profile Related tasks Exporting a Profile Controlling the Projected Display Follow these instructions to use the toolbar and the projection control screen to control the screen being projected.
• The projection control screen is available only on the Standard Edition of the software. • Use the toolbar to display a wide image of the projected display and perform operations on the projected image. • Use the projection control screen to change the number of projected panels, presenters, or the projection position.
Operating the Projected Display Status You can control the projected display while projecting your computer screen by starting, stopping, or pausing the projected image. Perform one of the following operations on the toolbar or the projection control screen. • Show: Click the button. The computer screen is projected as it is. • Stop: Click the button. The projected image stops. A black screen is projected while stopped. • Pause: Click the button. The projected image pauses.
The projection control screen is displayed. 2. Click the panel of the user to be projected in the projection area. The selected panel is framed in blue. 3. Perform one of the following operations to change the number of available panels in the projection area. • Project one panel in full screen mode: Click the button. • Split the projected display in two and projecting the selected panel and the adjacent right or left panel: Click the button.
• If there is no user in a white panel, a black screen is projected. • The background color for panels not being projected is gray. Parent topic: Controlling the Projected Display Related references Projection Control Screen Changing the Presenter You can change the presenter by dragging and dropping one of the connected user names in the list onto a panel in the projection area. Note: This function is not available for participants when using the moderator function. 1. Click the button on the toolbar.
Note: • The moderator can check the participant's device screens as thumbnails and select which user to project. Click the button on the toolbar or the projection control screen. • If you cannot find the user that you want to project in the user list, you can search for them using the user search box. • You can also right-click a user name in the user list to select the projection position. • If there is no user in a white panel, a black screen is projected.
2. Select the user in the projection area, and then drag and drop the user name into another position. The projection position is changed. Note: When the or button is selected, you can drag and drop the user name in a gray panel to the white panel to switch the image being projected. If you drag and drop the user name in a white panel to the gray panel, the image for that user will not be projected.
The connection between your computer and the projectors is ended. Note: • When you are the moderator, the Disconnect All button is displayed on the toolbar instead of this button. • You can also disconnect by clicking Leave from the Disconnect menu on the projection control screen. • The moderator can disconnect other participants by right-clicking the selected user in the user list, and then clicking Leave on the projection control screen when using the moderator function.
The connection between all devices and projectors participating in the meeting is ended. Note: This function is not available for participants when using the moderator function. The confirmation screen is displayed. 2. Click OK. You are returned to the search screen.
Using Additional Functions Follow these instructions to use additional EasyMP Multi PC Projection functions that may be useful during a meeting.
2. Select where you want to save the shortcut (.pme), and then click Save. The shortcut is created and the projector information is saved in the shortcut. Note: • Double-clicking a shortcut (.pme), you can start EasyMP Multi PC Projection in the same mode as you created its shortcut. • When you use the Participant Edition of the software, use a shortcut file created in Advanced Connection Mode.
• Windows 8 and Windows 8.1: Navigate to the Apps screen and select USB Key Setup Tool. • Windows 10: Select Start, select All apps, select EPSON Projector, EasyMP Multi PC Projection, Tools, and then select USB Key Setup Tool. 2. Select the application type that starts when you insert the USB key to your computer. 3. Insert an empty USB flash drive directly to your computer's USB port. 4. Follow the on-screen instructions to create the USB key.
5. Insert the USB key into the projector's USB Type A port. Note: The location of the USB Type A port varies depending on your projector. See your projector User's Guide for more details. You see a projected message that the network information update is complete. 6. Remove the USB key. 7. Insert the USB key into a USB port on your computer. Note: In Windows Vista, if the AutoPlay window is displayed, select Run LaunchMPP.exe, then select Allow. 8.
Connecting to Multiple Projectors (Mirroring) Connecting to multiple projectors and projecting the same image is known as mirroring. You can perform mirroring with up to four projectors. Note: • Mirroring is available only in Advanced Connection Mode. • You cannot perform mirroring with projectors that are not compatible with EasyMP Multi PC Projection. • For best results, we recommend that you connect the projector to a wired LAN to perform mirroring.
On the search screen, select up to four projectors you want to connect to, and then click Join. A projector mirroring group is formed and the same image is projected from multiple projectors. Note: • When you select one projector from a projector mirroring group, all of the projectors in that group are selected. • When other users are already connected to a projector in a mirroring group, you can only select another projector from the same mirroring group.
3. Select Output audio from the projector, and then click OK. Note: When you select 256Kbps or 512Kbps as Use Bandwidth on the Adjust performance tab, you cannot output audio from the projector and cannot select this setting. The Set options screen closes. Parent topic: Using Additional Functions Related tasks Projecting Your Screen Controlling the Connection Bandwidth Projecting Your Screen You can project the computer screen in full screen mode without projecting any other users' screens. 1.
The toolbar is displayed. 2. Click the button. Note: • You can also use the button on the projection control screen. • This button is not available for participants when using the moderator function. Your computer screen is projected in full screen mode. Parent topic: Using Additional Functions Changing the Moderator While using the moderator function, you can change the moderator when another user needs to control the projected display.
3. Click the Quit as Moderator button on the moderator's computer. The confirmation screen is displayed. 4. Click OK. The moderator function turns off.
5. Click the Become Moderator button on the projection control screen on a different user's computer. The confirmation screen is displayed. 6. Click OK. The moderator function turns back on and the new moderator can control the projected display. Parent topic: Using Additional Functions Related concepts Connection Methods for Various Meeting Styles Distributing the Projected Screen The moderator can distribute the currently projected screen images to the participant's devices. 1.
You see the confirmation screen. 2. Click Start. The 3. Click the button and the button appear on the computer screen. button. When the screen distribution succeeds, the moderator sees a completion message and the distributed image automatically appears in the Viewer on the participant's devices.
• To clear all selections, click selected again. . If you click this again, the previously selected thumbnails are • To switch the size and the number of thumbnails displayed on one page, click the button. 3. Click the or button. Note: When you select more than 5 thumbnails, the thumbnail selection screen appears. After selecting up to 4 thumbnails, you must click the The selected thumbnails are projected. Click the to the toolbar or the projection control screen. button again.
3. Select Freeze projected screen when displaying Projection control screen, and then click OK. The Set options screen closes. The operation on the projector control screen will not be projected next time you use it. Parent topic: Using Additional Functions Prohibiting Participant Operations The moderator can lock mouse operations on participant's devices so that the participant cannot change the images being projected.
• Click the button on the projection control screen to unlock the participant's mouse operations. The button changes to the button on the projection control screen. The participants can operate the mouse on their devices. Parent topic: Using Additional Functions Controlling the Connection Bandwidth You can reduce the size of data transferred to the projector to decrease the network load. To do this, you can control the connection bandwidth. 1. Click Set options on the search screen.
4. Select the bandwidth you want to use as the Use Bandwidth setting. When you select a narrower bandwidth, the projected image quality may decline but the network load is reduced. Note: If you do not need to output audio while controlling bandwidth, make sure you clear the Output audio from the projector setting on the Audio Output tab. The bandwidth used for audio can then be used for the image transfer to improve the image quality.
Bandwidth Control Restrictions Note the following bandwidth limitations. • When you limit the bandwidth, the image quality may decline due to the compression of the transferred data. • When you select 256Kbps or 512Kbps as Use Bandwidth on the Adjust Performance tab, you cannot output audio from the projector. If you want to transfer audio, select the bandwidth to 1Mbps or more.
Solving Problems See the following sections to check for solutions to problems you may have using EasyMP Multi PC Projection. Solving Network Connection Problems Solving Problems During Projection Error Messages List Event ID List Solving Network Connection Problems Try these solutions depending on your network environment.
• Check the computer's network settings. • If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your computer. • Enable the wireless LAN setting or AirPort on your computer. • Check the software settings. • If a user other than the moderator has established a connection and the projected image remains as it is, you can interrupt the current connection to project your screen.
• Make sure that the access point and the computer or projector are not too far apart. Move them closer together and try to connect again. • If the wireless connection is slow or your projected image contains noise, check for interference from other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or expand your wireless bandwidth. • Set the radio strength for the network devices to the maximum.
• Check the software settings. • Select the network adapter you are using from Switch LAN on the Set options screen. If the computer has multiple LAN environments, a connection cannot be established unless the network adapter is selected correctly. • If you cannot find the projector you want to connect to using Automatic search, select Manual search to specify the IP address.
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired) When you cannot connect the computer and the projector using Advanced Connection Mode over a wired network, try the following solutions. If you cannot resolve the problem, contact your network administrator. • Check the status of the external devices used for the network connection or the environment in which the network devices and the projector are located. • Connect the network cable securely.
• If a user other than the moderator has established a connection and the projected image remains as it is, you can interrupt the current connection to project your screen. If a Projector Keyword is set for the projector but you do not know the keyword, display the Home screen to check the projector keyword. If your projector does not have a Home screen, click the button on the toolbar or the projection control screen on the computer from which you entered the keyword.
Solutions When the Screen is Not Projected Properly If the screen is not projected or there are problems with the project images try the following solutions. • If you are using a Microsoft Office application, stop moving the mouse pointer. If you move the mouse pointer continuously, the screen may not be refreshed quickly. • If the mouse pointer flickers, try the following solutions. • Select Make the movement of the mouse pointer smooth on the General settings tab on the Set options screen.
• You can only output the computer's audio from the projector when projecting one computer screen in full screen mode. • If the bandwidth is limited on the Adjust Performance tab on the Set options screen, try increasing the connection bandwidth. • If the volume for the computer is set to the minimum while the projector volume is set to the maximum, the noise may be mixed. Turn up the computer's volume and turn down the projector's volume.
Related tasks Distributing the Projected Screen Error Messages List When an error occurs, an error message is displayed on your computer screen. Check for your message and follow the instructions here to clear the error.
Error Messages Remedy Cannot start this application because other EPSON Projector software (USB Display) is already running. Close USB Display and then start EasyMP Multi PC Projection. Do one of the following to close USB Display: • Windows: Disconnect the USB cable from the projector. • OS X: Select Disconnect from the USB Display icon menu on the menu bar or Dock, and then remove the USB cable.
Error Messages Remedy Network adapter information could not be obtained. Check the following items. • A network adapter is installed on the computer. • The driver for the network adapter being used is installed on the computer. • The network adapter is enabled. After checking, restart the computer and then restart EasyMP Multi PC Projection. If you still cannot connect, check the network settings on the computer and the network settings on the projector. Cannot start from the shortcut while projecting.
Error Messages When Using a USB Key Error Messages Remedy Unable to find connection information. Insert the USB key. Insert the USB key securely into your computer. Unable to find connection information. Insert the USB key into the projector. Insert the USB key securely into the projector to update the projector network information. Unable to find a projector that can connect with Quick Connection Mode. Close EasyMP Multi PC Projection and then insert the USB key again.
Error Messages When Searching for and Selecting Projectors Error Messages Remedy Cannot join. The maximum number of participants has been exceeded. The maximum number of devices are already connected to the projector. Disconnect users and projectors that are not projecting screens. The projector keyword does not match. Please try again. Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword. Connection failed due to projector keyword mismatch.
Installing EasyMP Multi PC Projection (Windows) Installing EasyMP Multi PC Projection (OS X) Related topics Supported Resolutions and Colors Error Messages When Projecting Error Messages Remedy The projector has disconnected. An error may have occurred in the projector. Check the projector's indicator lights. A network error occurred. Try connecting again. If you still cannot connect to the projector, check the network settings on the computer and the network settings on the projector.
Error Messages Remedy Cannot import because the folder structure exceeds six folders. The folder structure cannot exceed six layers. Import, move, or copy to a folder higher up in the folder structure. Cannot move because the folder structure exceeds six folders. Cannot copy because the folder structure exceeds six folders. Failed to open the file. The profile may be corrupted. Try importing the profile again. Failed to save the file.
Related tasks Changing the Moderator Error Messages When Distributing the Projected Screen Error Messages Remedy The projector is processing. Wait for a while, and then try to deliver again. Close running projector functions, and then try again. Cannot deliver the image currently being projected. Make sure the image being projected is not protected by copyrights. A network error occurred while delivering. Please try again. Make sure the moderator can connect to the projector.
Event ID Cause Remedy 0434 Network communication is unstable. Check the network communication status, and reconnect after waiting for a while. 0433 Cannot play transferred images. Restart the network software. 0484 Communication was disconnected from the computer. 04FE The network software ended unexpectedly. Check the status of network communications. Restart the projector. 04FF A system error occurred in the projector. Restart the projector.
Event ID Cause Remedy 0B01 The built-in storage could not be detected correctly. Perform Delete All Internal Data. When the internal storage is deleted correctly, plugin the power cord for the projector and turn it on. If it is not deleted correctly, contact Epson as described in your projector User's Guide. Go to Extended > Whiteboard Settings > Internal Storage. 0BFF An error has occurred in the Whiteboard function. Parent topic: Solving Problems 89 Restart the projector.
Screen Summary See these sections for more information about the EasyMP Multi PC Projection screens.
Select Connection Mode Screen When you start EasyMP Multi PC Projection, the select connection mode screen is displayed. 1 Select the connection mode. 2 Select to always connect using the selected connection mode.
Search Screen When you start EasyMP Multi PC Projection, the search screen is displayed. 1 User name Displays the user name displayed in the user list on the projection control screen. You can edit the user name on the User Settings tab on the Set options screen. 2 Automatic search Searches for projectors on the network to which the computer is connected.
8 List of Connected Projectors (Advanced Connection Mode only) Displays information on the projectors selected from the Projector List. Even if the search method is changed, the content of the List of Connected Projectors remains the same. 9 Register (Advanced Connection Mode only) Registers the projectors from the List of Connected Projectors to a profile. 10 Connect as a Moderator, or disable interrupt connections.
Projector status icons in the Projector List are described in the following table. Available. You can connect to the projector. Standby Available. Although other computers are connected to the projector, you can also connect at the same time. Busy Available. You can connect to a group of projectors that are projecting the same image (mirroring). Mirroring... Not available. The projector is displaying the network configuration screen or is being used by other projector software.
Related tasks Searching for Network Projectors Automatically Searching for Network Projectors by Specifying an IP Address or Projector Name Related topics Searching for Network Projectors Using a Profile Searching for Network Projectors Using a Shortcut Set options Save Screen When you search for projectors and save information as a profile on the search screen, the Save screen is displayed. A B C D 1 Projector file name Enter the projector file name.
2 Save in Select the folder where you want to save the profile. 3 Create New folder Creates a new folder. 4 OK Registers the projector information in the profile. Parent topic: Screen Summary Related tasks Registering a Profile Set options When you click Set options on the EasyMP Multi PC Projection search screen, the Set options screen is displayed. Note: • You can also access Set options from the Tool menu on the projection control screen.
Set options - User Settings When you click the User Settings tab on the Set options screen, the following screen is displayed. User name Enter the user name displayed in the user list on the projection control screen. You can enter up to 32 characters. This setting is synchronized with the setting on the search screen. Shared Profile Name (Advanced Connection Mode only) Enter the network location or URL of the shared profile (including the name of the profile) as shown below.
Restore Defaults Resets all adjustment values for Set options to their default settings, except for Switch LAN on the General settings tab. Parent topic: Set options Related references Search Screen Projection Control Screen Related tasks Searching for Network Projectors Automatically Sharing a Profile over a Network Set options - General settings When you click the General settings tab on the Set options screen, the following screen is displayed.
Encrypt communications Select to encrypt and transmit data. Even if data is intercepted, it cannot be decrypted. Display in high resolution when dividing the projected screen in two or four Available only for projectors with a resolution of WUXGA (1920 × 1200). Select to display all divided screens in high resolution. Clear this setting if displaying the image takes too long or is interrupted.
Switch LAN Windows only Use this setting if you need to switch the network adapter used to perform a search when a computer has multiple adapters. By default, all of the network adapters are used to perform a search. Wireless LAN passphrase setting files (Quick Connection Mode only) In Quick Connection Mode, SSIDs and passphrases are stored on the computer when connecting to a projector with security settings enabled. You can edit and delete the stored information.
Set options - Adjust performance When you click the Adjust performance tab on the Set options screen, the following screen is displayed. Projection Quality Sets the priority for projected image quality and transfer speed. • Image Priority: Transfers projected image data with a low compression ratio to prioritize image quality. • Speed Priority: Compresses projected image data to increase transfer speed. Use Bandwidth Controls the bandwidth for the data transfer.
Lower the resolution and transfer Available only when the Use Bandwidth is set to 1Mbps or more and when you connect to the projector with a resolution of WUXGA (1920 × 1200). Select to reduce the size of the data to be transferred to the projector by lowering the resolution. Use this option on a slow network or if it takes too long to display the image or projection is interrupted.
Set options - Audio Output When you click the Audio Output tab on the Set options screen, the following screen is displayed. Output audio from the projector Select to output the computer's audio from the projector. Clear to output audio from the computer. Note: • You can only output the computer's audio from the projector when projecting one computer screen in full screen mode.
Parent topic: Set options Related tasks Outputting Audio from the Projector Controlling the Connection Bandwidth Set options - Deliver When you click the Deliver tab on the Set options screen, the following screen is displayed. Display received images in the Select to open the received image in the Viewer bundled with Viewer EasyMP Multi PC Projection.
Save Location Folder Displays the folder where the received image file is saved. Saved images are stored in the following folders. • Windows :\users\\Documents\EasyMP Multi PC Projection • OS X :\Users\\Pictures\EasyMP Multi PC Projection Open Save Location Folder Opens the folder where the received image file is saved. Allow Moderator Monitoring Select to allow the moderator to view the computer screen as a thumbnail.
Releases Stop or Pause and projects the computer screen as it is. Show Stops projection while connected to the projector. A black screen is projected while stopped. Stop Pauses the computer screen currently displayed. The projected display does not change, even if you make changes on the computer screen. Pause Distributes the currently projected screen images to the participant's devices. Deliver Projected Screen Displays thumbnails of the participant's device screens for the moderator to check.
Switches to the projection control screen. Switch to Projection control screen Displays projector network information. The Projector Keyword is the keyword you entered when you connected to the projector. Projector Information ----: The projector keyword is not set. Unknown: The projector keyword is not acquired because the connection is established without entering the projector keyword such as reading QR code and inserting the USB key.
Projection Control Screen When you click the button on the toolbar, the projection control screen is displayed. Note: • The projection control screen is available only on Standard Edition of the software. • The items displayed on the projection control screen vary depending on your role of the software and projector being used.
1 File menu Click to select Exit to close the software. Tool menu Click to select the following items. • Deny User Operations: Locks the participant's mouse operations. • Allow User Operations: Unlocks the participant's mouse operations. • Deliver Blank Screen: Distributes a blank screen to the participant's devices so that participants can draw freely. • Display Received Image: Displays received images in the Viewer. • Set options: Displays the Set options screen.
6 Distributes the currently projected screen images to the participant's devices. Deliver Projected Screen 7 Connected Projector Name 8 Displays the name of the projector you are currently connected to. When you click the projector name, the projector control web page is displayed. You can control projector operations on your computer screen in the same way as using the remote control. See your projector User's Guide for more details. Displays projector network information.
14 Screen control buttons 15 Indicates the following status of the projector. • Show: Releases Stop or Pause and projects the computer screen as it is. • Stop: Stops projection while connected to the projector. A black screen is projected while stopped. • Pause: Pauses the computer screen currently displayed. The projected display does not change, even if you make changes on the computer screen. Locks or unlocks the participant's mouse operations.
Related references Search Screen Set options - User Settings Toolbar Related tasks Disconnecting Projecting Your Screen Changing the Moderator Hiding the Projection Control Screen Distributing the Projected Screen Prohibiting Participant Operations Related topics Controlling the Projected Display Thumbnail Screen When you click the displayed.
1 Thumbnail Displays a participant's device screen. The thumbnail being projected is surrounded by a blue frame. 2 Thumbnail check box Select the thumbnail that you want to project. You can select up to 12 thumbnails. 3 User name Displays the user name of each thumbnail. You can display up to 32 characters. 4 Closes the thumbnail screen. Close 5 Projects the thumbnail you selected. When you select more than 5 thumbnails, the thumbnail selection screen appears.
11 Increases the size of each thumbnail so you can view more details on each one. Display Large Thumbnails 12 Clear All 13 Displays the number of selected thumbnails. Deselect the check box to clear all the selections. If you select the check box again, the previously selected thumbnails are selected again. Refreshes the thumbnails. Refresh Parent topic: Screen Summary Viewer Screen The viewer screen appears when you perform one of the following operations.
• When you click the button on the toolbar. 1 Next data Displays next data. 2 Previous data Displays previous data.
Appendix See these sections to learn more about EasyMP Multi PC Projection software. Updating and Uninstalling the Software Supported Resolutions and Colors Limitations Notices Updating and Uninstalling the Software Follow these instructions to update or uninstall EasyMP Multi PC Projection. Getting the Latest Version of the Application Uninstalling EasyMP Multi PC Projection (Windows Vista/Windows 7/Windows 10) Uninstalling EasyMP Multi PC Projection (Windows 8.
5. Select EasyMP Multi PC Projection, and then click Uninstall/Change. 6. Follow the on-screen instructions. Parent topic: Updating and Uninstalling the Software Uninstalling EasyMP Multi PC Projection (Windows 8.x) Follow the instructions below to uninstall EasyMP Multi PC Projection. Note: You need administrator authority to uninstall the software. 1. Turn on your computer. 2. Make sure all running applications are closed. 3.
Parent topic: Appendix Supported Resolutions The following computer screen resolutions can be projected. You cannot connect to a computer with a resolution greater than WUXGA.
Limitations Check these sections for restrictions applied when projecting computer images while using EasyMP Multi PC Projection. Connection Limitations Limitations when Projecting from Windows Photo Gallery or Windows Live Photo Gallery Limitations in Windows Aero Limitations when Projecting from Windows Media Center Parent topic: Appendix Connection Limitations Note the following limitations when using EasyMP Multi PC Projection.
Limitations when Projecting from Windows Photo Gallery or Windows Live Photo Gallery Note the following limitations when launching Windows Photo Gallery or Windows Live Photo Gallery when using EasyMP Multi PC Projection. • Slideshow is played back in simple mode when projecting from Windows Photo Gallery or Windows Live Photo Gallery. Because the toolbar is not displayed, you cannot change the Theme (effects) while playing a slide show, regardless of the Windows Experience Index rating.
It is recommended that you select Keep the current color scheme, and don't show this message again. This selection is enabled until the computer is restarted. Parent topic: Limitations Limitations when Projecting from Windows Media Center Note the following limitations when projecting from Windows Media Center. • You cannot project images in full screen mode using Windows Media Center. Switch to window display mode to project the images.
The contents of this guide may be changed or updated without further notice. Illustrations in this guide and the actual projector may differ. Parent topic: Notices About Notations • Microsoft® Windows Vista® operating system • Microsoft® Windows® 7 operating system • Microsoft® Windows® 8 operating system • Microsoft® Windows® 8.1 operating system • Microsoft® Windows® 10 operating system In this guide, the operating systems above are referred to as "Windows Vista", "Windows 7", "Windows 8", "Windows 8.
Software Copyright: This product uses free software as well as software to which this company holds the rights. © 2016 Epson America, Inc.
