User Guide

188
On/Standby
(power) light
Status light Lamp
light
Temp
light
Filter light Status and solution
Off Flashing
blue
Orange Off Off Lamp has a problem.
• Check to see if the lamp is
burned out, broken, or installed
incorrectly. Reseat or replace
the lamp as necessary.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug
the projector and contact Epson
for help.
Off Flashing
blue
Off Off Orange Low air flow through the projector.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.
Off Flashing
blue
Flashing
orange
Flashing
orange
Off Auto Iris error. Turn off the
projector, unplug it from the
electrical outlet, and contact
Epson for help
Off Flashing
blue
Orange Orange Off Power error (balast) or Lens Shift
error. Turn off the projector,
unplug it from the electrical outlet,
and contact Epson for help