User Guide

203
Setting Options Description
Light Source Calibration Run Now
Run Periodically
Schedule Settings
Selects options to perform light
source calibration to maintain the
color balance of the projected
image
Run Now: Select On to start light
source calibration now. Make
sure the projector has been
turned on for at least 20 minutes
for maximum accuracy.
Note: You may not be able to
start calibration depending on the
environmental temperature.
Run Periodically: Select On to
perform calibration every 100
hours of usage
Schedule Settings: Goes to the
Schedule Settings screen
Reset All Config — Resets most of the projector
settings to their defaults*
Reset All (Factory Default) — Resets all projector settings to
their defaults.** You may need to
enter your password.
*You cannot reset the following settings using the Reset All Config option:
• Input Signal
• Memory
• Content Playback
• User's Logo
• Display Background
• Startup Screen
• Color Uniformity