Operating Guide
Table Of Contents
- Contents
- Introduction to the Epson iProjection Software
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up the Epson iProjection Software
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
26
• You select one of these settings to connect the projector to the computer directly using wireless
communication. The necessary settings vary depending on your projector.
• Turn on the Simple AP setting.
• Select Quick for Connection Mode.
Note:
• When you use the Participant Edition of the software, you must connect the projector and a
computer over a network system.
• When you connect the projector and a computer directly using wireless communication, the
connection between the computer and an access point is disconnected.
• Make sure you turn on your computer's wireless communication function.
1. Press the LAN button or Source Search button on the remote control to switch the input source to
LAN.
You see the network information screen.
2. Start the Epson iProjection software.
• Windows 7: Click Start, select Programs (or All Programs), EPSON Projector, Epson
iProjection, and then click Epson iProjection Ver.X.XX.
• Windows 8 and Windows 8.1: Navigate to the Apps screen and select Epson iProjection
Ver.X.XX.
• Windows 10: Select Start, EPSON Projector, and then select Epson iProjection.