Operating Guide
Table Of Contents
- Contents
- Introduction to the Epson iProjection Software
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up the Epson iProjection Software
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
69
Bandwidth Control Restrictions
Note the following bandwidth limitations.
• When you limit the bandwidth, the image quality may decline due to the compression of the
transferred data.
• When you select 256Kbps or 512Kbps as Use Bandwidth on the Adjust performance tab, you
cannot output audio from the projector. If you want to transfer audio, select the bandwidth to 1Mbps or
more.
• The bandwidth may momentarily exceed the value you selected because each value in the list is an
average value measured within 30 seconds.
• You can limit the bandwidth only of data you send. You cannot limit data that you receive, such as a
thumbnail.
Parent topic: Controlling the Connection Bandwidth
Related tasks
Outputting Audio from the Projector