Operating Guide
Table Of Contents
- Contents
- Introduction to the Epson iProjection Software
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up the Epson iProjection Software
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
79
Error Messages Remedy
Cannot find the projector linked to the shortcut file.
Search again.
Check the following items.
• Open a shortcut file in the connection mode for
which you created the shortcut file.
• Open a shortcut file in Advanced Connection
Mode if you use the Participant Edition of the
software.
Files are missing or invalid. Failed to start the
application. Reinstall/remove the application.
Uninstall and then reinstall the Epson iProjection
software.
Network adapter information could not be
obtained.
Check the following items.
• A network adapter is installed on the computer.
• The driver for the network adapter being used is
installed on the computer.
• The network adapter is enabled.
After checking, restart the computer and then
restart the Epson iProjection software.
If you still cannot connect, check the network
settings on the computer and the network settings
on the projector.
Cannot start from the shortcut while projecting. Stop projecting and then start projection from the
shortcut. You cannot start projection from the
shortcut when you are already projecting using the
Epson iProjection software.
Cannot start from the shortcut while the Option
screen is displayed. Close the Option screen, and
then try opening the shortcut again.
The Set options screen is displayed. Close the
Set options screen.
The slide show will not begin until PowerPoint is
restarted.
Close PowerPoint, and then start the slide show
again.
Cannot be used with the current OS version.
Reinstall Epson iProjection.
Reinstall the Epson iProjection software.
Unable to start from the shortcut. A connection has
already been established with the projector.
Stop projecting and then start projection from the
shortcut. If the USB key is connected, remove the
USB key.