Operating Guide
Table Of Contents
- Contents
- Introduction to the Epson iProjection Software
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up the Epson iProjection Software
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
81
Error Messages Remedy
Administrator authority is required to run USB Key
Setup Tool.
Run the USB Key Setup Tool as a user with
administrator authority.
Parent topic: Error Messages List
Related tasks
Creating a USB key on a USB Flash Drive (Windows Only)
Using a USB Key to Connect a Windows Computer
Error Messages When Searching for and Selecting Projectors
Error Messages Remedy
Cannot join. The maximum number of participants
has been exceeded.
The maximum number of devices are already
connected to the projector. Disconnect users and
projectors that are not projecting screens.
The projector keyword does not match. Please try
again.
Check the Projector Keyword displayed on the
screen, and enter the Projector Keyword.
Connection failed due to projector keyword
mismatch.
The selected projector is mirroring another
projector.
When another user is already connected, you can
only connect to the projectors in the same
mirroring group as that selected by the other user.
Select a projector from the same mirroring group,
or select a projector that is in standby status.
One or more projectors are not responding. You cannot connect to multiple projectors
simultaneously. Check the network settings on the
computer and the network settings on the
projector.
A network error occurred. Turn on your computer's wireless LAN, and then
try searching for the projector again. If you still
cannot connect to the projector, check the network
settings on the computer and the network settings
on the projector.