Operating Guide
Table Of Contents
- Contents
- Introduction to the Epson iProjection Software
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up the Epson iProjection Software
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
84
Error Messages When Using the Moderator Function
Error Messages Remedy
Cannot switch to moderator. You cannot become the moderator when another
user is the moderator. Ask the current moderator
to quit, and then try again.
Failed to switch to Moderator Mode Make sure another user is not the moderator, and
then try again.
The moderator function is not available. You have
been connected as a participant.
The projector you are connecting to does not
support the moderator function. To become the
moderator, change to a projector that supports the
moderator function.
Parent topic: Error Messages List
Related tasks
Changing the Moderator
Error Messages When Distributing the Projected Screen
Error Messages Remedy
The projector is processing. Wait for a while, and
then try to deliver again.
Close running projector functions, and then try
again.
Cannot deliver the image currently being
projected.
Make sure the image being projected is not
protected by copyrights.
A network error occurred while delivering. Please
try again.
Make sure the moderator can connect to the
projector.
Cannot save the received file. Check the amount
of free space.
Make sure you have enough free space to save
the received images.
Cannot save the received file. Check the access
rights to the Save To folder.
Check the location where the received image is
saved on the Deliver tab in the Set options
screen and make sure you have access rights to
the folder.
Cannot save the received file. Check the folder
settings.
Parent topic: Error Messages List