Operating Guide
Table Of Contents
- Contents
- Introduction to the Epson iProjection Software
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up the Epson iProjection Software
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
90
8 List of Connected
Projectors (Advanced
Connection Mode only)
Displays information on the projectors selected from the Projector
List. Even if the search method is changed, the content of the List of
Connected Projectors remains the same.
9 Register (Advanced
Connection Mode only)
Registers the projectors from the List of Connected Projectors to a
profile.
10 Connect as a
Moderator, or disable
interrupt connections.
Connects to the selected projectors as the moderator and you can
prevent any other users from interrupting your connection (supported
models only).
The moderator function is available only on the Standard Edition of
the software.
11 Clear list Clears information displayed in the Projector List and the List of
Connected Projectors.
12 Projector List Displays a list of the projectors found on the network. You can then
select projectors to connect to. The search results for each search
method (Automatic search, Manual search, and Profile) are
displayed in separate lists.
• Status: See the description of projector status icons in the next
table.
• Projector name: Displays the projector's name.
• SSID (Quick Connection Mode only): Displays the projector's
SSID.
• Signal intensity (Quick Connection Mode only): Displays the
signal intensity when a connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit
indicators.
• IP address (Advanced Connection Mode only): Displays the
projector's IP address.
• Comments: Displays comments for the projector. You can edit the
comment by right-clicking the profile, and then clicking Property.
You can enter up to 32 characters.
13 Refresh Updates information in the Projector List.
14 Manual search box
(Advanced Connection
Mode only)
When using Manual search, enter the projector's IP address or the
projector name. Click the Search button to search for the specified
projector.