Operating Guide

96
Encrypt communications Select to encrypt and transmit data. Even if data is intercepted, it
cannot be decrypted.
Display in high resolution
when dividing the projected
screen in two or four
Available only for projectors with a resolution of WUXGA (1920 ×
1200) or Full HD (1920 × 1080).
Select to display all divided screens in high resolution.
Clear this setting if displaying the image takes too long or is
interrupted.
Display Connection Mode
Selection window on startup
Select to display the Select Connection Mode screen each time the
software starts.
Clear this checkbox once you have settled on a regular startup
method.
Make the movement of the
mouse pointer smooth
Windows 7 only
Select to prevent the mouse pointer from flickering when Transfer
layered window is selected on the Adjust performance tab. (If
Windows Aero is selected as the theme for Windows 7, this setting
turns off Windows Aero.)
Freeze projected screen when
displaying Projection control
screen
Available only for the moderator when using the moderator function.
Select to hide the operations on the projection control screen from
other users while projecting your computer screen.
Use Easy Interactive Tools Windows only
Select to use Easy Interactive Tools with the software.
This setting is synchronized with Transfer layered window on the
Adjust performance tab.
Use Interactive Pen Select to use the interactive function over a network (supported
models only). You do not need to connect a computer to the
projector with a USB cable.
You can use the following devices at the same time.
• Windows: Two Easy Interactive Pens and six touch points
• Mac: One mouse
Quit application when
removing the USB key
Select to disconnect the computer when you remove the USB key
from your computer. Deselect this checkbox if you want to share the
USB key with other users without disconnecting your computer.