User Guide
Table Of Contents
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Selecting External Network Detection Settings
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Viewing 3D Images
- Selecting the Language for the Projector Menus
- Adjusting the Image Height
- Adjusting the Image Position Using Lens Shift
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions When a 3D Image Does Not Display Correctly
- Solving Projector or Remote Control Operation Problems
- Solving Network Problems
- Where to Get Help
- Technical Specifications
- Notices
103
Setting Options Description
Sharpness Varying levels available
Standard
Thin Line Enhancement
Thick Line Enhancement
Adjusts the sharpness or
softness of image details
Standard: enhances outlines for
the entire image; adjusts the
Thin Line Enhancement and
Thick Line Enhancement
settings as well (defaults to 5)
Thin Line Enhancement:
enhances details such as hair
and clothing patterns
Thick Line Enhancement:
enhances backgrounds and
larger elements
Color Temp. (color temperature) Color Temp.
Skin Tone
Customized
Grayscale (Pro Cinema
6050UB)
Color Temp.: sets the overall
color tone; higher values tint the
image blue and lower values tint
the image red (defaults to 8)
Skin Tone: makes fine
adjustments to the color tone;
higher values tint the image
green and lower values tint the
image red (defaults to 3)
Customized: adjusts the offset
and gain for each RGB color
Grayscale: adjust individual
amounts of red, green, and blue
for 8 levels of gray; adjust
Brightness to increase or
decrease R/G/B at the same
time; press Enter to switch the
background to the current input
source