Operation Guide
Table Of Contents
- Contents
- Introduction to Epson iProjection
- Setting Up the Software for the First Time
- Installing the Software
- Selecting Projector Network Settings
- Connection Methods for Various Network Environments
- Recommended Wireless Environment for Multi PC Projection
- Setting Up a Projector to Connect in Quick Connection Mode
- Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
- Setting Up a Projector to Connect in Advanced Connection Mode (Wired)
- Connecting to the Projector and Projecting Images
- Using Additional Functions
- Searching for Network Projectors Using a Shortcut
- Connecting to Network Projector Using a USB Flash Drive (Windows Only)
- Connecting to Multiple Projectors (Mirroring)
- Outputting Audio from the Projector
- Projecting Your Screen
- Changing the Moderator
- Distributing the Projected Screen
- Selecting the Participant's Screen to Project Using Thumbnails
- Hiding the Projection Control Screen
- Prohibiting Participant Operations
- Controlling the Connection Bandwidth
- Solving Problems
- Solving Network Connection Problems
- Solving Problems During Projection
- Error Messages List
- Error Messages When Starting up Epson iProjection
- Error Messages When Using a USB Key
- Error Messages When Searching for and Selecting Projectors
- Error Messages When Projecting
- Error Messages When Operating a Profile
- Error Messages When Using the Moderator Function
- Error Messages When Distributing the Projected Screen
- Event ID List
- Screen Summary
- Appendix
87
Event ID Cause Remedy
0434 Network communication is unstable. Check the network communication status,
and reconnect after waiting for a while.
0481
0482
0433 Cannot play transferred images. Restart the network software.
0484 Communication was disconnected from the
computer.
04FE The network software ended unexpectedly. Check the status of network
communications. Restart the projector.
04FF A system error occurred in the projector. Restart the projector.
0891 Cannot find an access point with the same
SSID.
Set the computer, the access point, and the
projector to the same SSID.
0892 The WPA/WPA2 authentication type does
not match.
Check that the wireless LAN security
settings are correct.
0893 The WEP/TKIP/AES encryption type does
not match.
0894 Communication was disconnected because
the projector connected to an unauthorized
access point.
Contact your network administrator for more
information.
0898 Failed to acquire DHCP. Check the DHCP server to see if it is
operating correctly and check the LAN cable
to see if it is connected correctly. If you are
not using DHCP, set DHCP to Off.
0899 Other communication errors If restarting the projector or the network
software does not solve the problem,
contact Epson as described in your projector
User's Guide.
089A The EAP authentication type is not the
same.
Check that the wireless LAN security
settings are correct. Also, check if the
certificate is installed correctly.
089B EAP server authentication failed.
089C EAP client authentication failed.
089D Key exchange failed.