Quick Reference Guide

ManualsBrandsEpson ManualsProjectorsEpson Pro L1075UNL WUXGA 3LCD Laser Projector With 4K Enhancement

Turn the projector on

Illuminate buttons temporarily

EPSON, Instant Off, and Quick Corner are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson

Corporation.

PrivateLine is a registered trademark of Epson America, Inc.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

CPD-57480

Printed in XXXXXX

Automatically adjust

computer image

Change the aspect ratio

Open menus assigned by user

Zoom in or out on part of an image

Correct image distortion

Save and apply presets

Port to connect remote

control cable

Control one or multiple projectors

Hold down and use numeric keys

to select projector to control

Hold down and use numeric keys

to enter numbers

Select color modes

Turn the projector off

Select a source

Navigate through menu settings;

move pointer

Display a test pattern

Adjust the image position

Open projector menus

Select menu settings;

left mouse button

Temporarily turn off

display and audio

Move to next or previous

image when projecting from a

computer over the network

Control volume

Cancel current operation

or return to previous menu;

right mouse button

Display the Info menu

Switch image sources

Freeze the image

Split the screen between

two inputs

Adjust the focus

Change the image size

Reset menu settings to their

default value

Display the Home screen

Remote Control Map

Quick Reference

Pro L1060W/L1060WNL/L1070W/L1070WNL/L1060U/L1060UNL/

L1070U/L1070UNL/L1075U/L1075UNL

This Quick Reference card gives brief instructions on connecting your

projector and using common features. For details, see the online User’s

Guide.

IMPORTANT: Before using this product, make sure you read these

instructions and the safety instructions in the online User’s Guide.

Stereo mini jack cable

5BNC-to-VGA cable

VGA-to-component cable

VGA cable

HDMI cable

Mini-to-RCA cable

Ethernet cable

DVI cable

BNC-to-component cable

*413808300*

Summary of content (6 pages)

PAGE 1
Pro L1060W/L1060WNL/L1070W/L1070WNL/L1060U/L1060UNL/ L1070U/L1070UNL/L1075U/L1075UNL Quick Reference Remote Control Map Turn the projector on Illuminate buttons temporarily Turn the projector off Switch image sources This Quick Reference card gives brief instructions on connecting your Select a source Automatically adjust computer image Change the aspect ratio Display a test pattern Adjust the image position Open projector menus Navigate through menu settings; move pointer projector and using common
PAGE 2
Turning the Projector On 1. T urn on your computer or image source. 2. Remove the lens cover. 3. P ress the On button on the projector or the remote control. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on On button; just without pressing the plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4.
PAGE 3
Turning the Projector On 1. T urn on your computer or image source. 2. Remove the lens cover. 3. P ress the On button on the projector or the remote control. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on On button; just without pressing the plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4.
PAGE 4
Turning the Projector On 1. T urn on your computer or image source. 2. Remove the lens cover. 3. P ress the On button on the projector or the remote control. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on On button; just without pressing the plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User’s Guide. 4.
PAGE 5
Pro L1060W/L1060WNL/L1070W/L1070WNL/L1060U/L1060UNL/ L1070U/L1070UNL/L1075U/L1075UNL Quick Reference Remote Control Map Turn the projector on Illuminate buttons temporarily Turn the projector off Switch image sources This Quick Reference card gives brief instructions on connecting your Select a source Automatically adjust computer image Change the aspect ratio Display a test pattern Adjust the image position Open projector menus Navigate through menu settings; move pointer projector and using common
PAGE 6
Pro L1060W/L1060WNL/L1070W/L1070WNL/L1060U/L1060UNL/ L1070U/L1070UNL/L1075U/L1075UNL Quick Reference Remote Control Map Turn the projector on Illuminate buttons temporarily Turn the projector off Switch image sources This Quick Reference card gives brief instructions on connecting your Select a source Automatically adjust computer image Change the aspect ratio Display a test pattern Adjust the image position Open projector menus Navigate through menu settings; move pointer projector and using common