Quick Reference Guide

Switching Between Image
Sources
Press the Search button or one of the
source buttons (remote control), or the
Source Search button (projector).
Selecting the Lens Type
Make sure the Lens Type setting is
correct for the lens you are using.
1. Press the Menu button.
2. Select Extended > Operation >
Advanced > Lens Type.
Note: If the Lens Type setting is greyed
out, the projector has automatically
detected the installed lens and you can
skip the remaining steps.
3. Select the lens you are using.
4. When you’re done, press the Menu
button to exit.
Changing Screen Type
Set the Screen Type setting to the
screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match
the screen’s size and shape.
2. Press the or arrow buttons to
make the adjustment.
3. Press the Esc button to finish the
adjustment.
Correcting Image Shape
If your image is uneven on the sides,
you can use the projector’s distortion
correction features, such as
H/V-Keystone and Quick Corner
®
,
to adjust the shape. See the online
User’s Guide.
Making Other Image
Adjustments
For help on using the projector’s
features to improve the image quality,
see the online User’s Guide. You can
also view information on how to adjust
the image color, position, and edges
(Edge Blending) when projecting from
multiple projectors to create one
seamless widescreen image.
Turning the Projector Off
Press the Standby button to turn the
projector off. If you see a confirmation
message, press the Standby button
again.
Note: If the Direct Power On function is
enabled, you can unplug the projector or flip
the switch controlling the outlet to which the
projector is connected instead. To turn on
this feature, see the online User’s Guide.
With Epson’s Instant Off
®
technology,
you don’t have to wait for the projector
to cool down; just turn it off or unplug it
when you’re done.
Turning the Projector On
1. Turn on your computer or image
source.
2. Remove the lens cover.
3. Press the On button on the
projector or the remote control.
After the status light stays blue, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
On button; just
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.
4. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”
Changing the Language of
the Projector Menus
The default language of the projector’s
menu system is English, but you can
change it as necessary.
1. Press the Menu button to access
the projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu
button to exit.
4. When you’re done, press the Menu
button to exit.
Note: After changing the screen type, you
may need to change the aspect ratio of the
projected image depending on the input
signal. Press the Aspect button on the
remote control to change the aspect ratio,
if necessary.
Adjusting Image Position
1. Press the Lens Shift button
(remote control) or the Lens button
(projector).
2. Press the arrow buttons to adjust
the position of the projected image.
3. When you’re done, press the Esc
button to finish the adjustment.
If the projector is on a table, you can
level the image by turning any of the
projector’s adjustable feet.
Zooming and Focusing
1. On the remote control, press the
Zoom or Focus button.
On the projector, press the Lens
button repeatedly until the focus or
zoom adjustment screen is shown.
Troubleshooting
If you see a blank screen or the
message No signal
• Make sure the status light on the
projector is blue and not flashing,
and the lens cover is removed.
• Make sure the cables are connected
correctly. See the online User’s
Guide.
• You may need to change the image
source. See “Switching Between
Image Sources.” Also make sure the
source device is turned on.
If the projector and the notebook
don’t display the same image
Windows
®
Press the function key on your keyboard
that lets you display on an external
monitor. It may be labeled CRT/LCD or
have an icon such as
. You may
have to hold down the Fn key while
pressing it (such as Fn + F7). Wait a
moment for the display to appear. You
may need to press the keys again to
display the image on both devices.
On Windows 7 or later, hold down the
Windows key and press P at the same
time, then click Duplicate.
Mac
Open System Preferences and select
Displays. Click the Arrangement
tab and select the Mirror Displays
checkbox.
Where to Get Help
Manuals
For more information about using the
projector, you can view or download the
online manuals from the Epson website,
as described below.
Internet support
Visit www.epson.com/support (U.S.) or
www.epson.ca/support (Canada) and
search for your product to download
software and utilities, view manuals, get
FAQs and troubleshooting advice, or
contact Epson.
Speak to a support representative
To use the Epson
®
PrivateLine
®
Support
service, call [phone]. This service
is available for the duration of your
warranty period. You may also speak
with a projector support specialist by
dialing [phone] (U.S.) or
[phone] (Canada).
Support hours are 6 am to 8 pm, Pacific
Time, Monday through Friday and 7
am
to 4
pm, Pacific Time, Saturday.
Days and hours of support are subject
to change without notice. Toll or long
distance charges may apply.
Purchase supplies and accessories
You can purchase an air filter
(V13H134A46), screens, and other
accessories from an Epson authorized
reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
www.epsonstore.com (U.S. sales) or
www.epsonstore.ca (Canadian sales).