Owner's Manual

81
You see this screen:
Note: Linked devices are indicated in blue.
7. Select the device you want to control and project images from, and press Enter.
8. Select the following HDMI link options as necessary:
• Audio Out Device: select whether to output audio from the internal speakers or a connected
audio/video system.
• Power On Link: select what happens when you turn on the projector or linked device. Select PJ -
> Device or Bidirectional to turn the linked device on when the projector is turned on, or Device -
> PJ or Bidirectional to turn the projector on when the linked device is turned on.
• Power Off Link: select whether linked devices are turned off when the projector is turned off.
• Link Buffer: turn on to improve the performance of the linked operations by changing the settings
if the HDMI Link feature is not working correctly.
9. When you are finished, press Esc.
Parent topic: Adjusting Projector Features
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.