User's Manual
Table Of Contents
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Focusing the Image
- Adjusting the Front Feet
- Image Shape
- Remote Control Operation
- Using Voice Commands to Control Your Projector
- Pairing the Remote Control
- Selecting an Image Source
- Using Your Projector as a Chromecast
- Image Aspect Ratio
- Color Mode
- Controlling the Volume with the Volume Buttons
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solutions to Bluetooth Audio Problems
- Solving Projector or Remote Control Operation Problems
- Solving Network Problems
- Where to Get Help
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Bluetooth Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Supported Video Display Formats
- Notices
30
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Setting Up the Projector
Setting Up Android TV
Android TV must be set-up when you turn on the projector for the first time.
Note: A Google account is required to use certain features. Some apps require a paid subscription. After
initial setup, you can change the settings by selecting the icon at the top right of the Android TV Home
screen.
1. Press the Power button on the projector or remote control.
2. When the pairing screen is displayed, press and hold the Enter and Home remote control buttons
at the same time.
The light on the remote control flashes until pairing is complete.
3. Use the remote control arrow and Enter buttons to select the language you want to use from the
language selection screen.
4. Do one of the following:
• Select Continue to use an Android phone to set-up the projector's Wi-Fi and Google account
settings. Follow the on-screen instructions and skip to step 7.
• Select Skip to set-up the projector's Wi-Fi and Google account settings manually. Go to the next
step.