User's Manual

46
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Using the Projector as a Bluetooth Speaker
Operating Connected Devices Using the HDMI Link Features
Shutting Off the Picture Temporarily
Updating the Firmware
Resetting the Projector
Using the Projector as a Bluetooth Speaker
You can use the projector's speakers to output audio from a compatible device connected by Bluetooth.
Note: Bluetooth audio devices are not supported in some countries and regions. You cannot connect
multiple audio/video devices by Bluetooth at the same time. You may not be able to connect depending
on type of device and its Bluetooth standards. Several attempts may be required before pairing is
successful. Even when connecting within the specified communication distance, connections can be lost
due to the signal status.
1. Press the Bluetooth Speaker mode button on the projector or remote control to turn on Bluetooth
Speaker mode.
You see a confirmation on the screen.
2. Enable the Bluetooth function on the device you want to connect to and select Projector from the
available device list. See the documentation for the connected device for more information.
Note: There is a delay in the audio output from any Bluetooth audio device. If you want to
temporarily turn off the projected image, press the Blank button on the projector or remote control.
To cancel a Bluetooth connection, disconnect from the connected device.
3. To exit Bluetooth Speaker mode, press the Bluetooth Speaker mode button again.
You see a confirmation on the screen.
Parent topic: Adjusting Projector Features
Related references
Bluetooth Specifications