Owner's Manual
Table Of Contents
- User's Guide
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Remote Control Operation
- Selecting the Language for the Projector Menus
- Projection Modes
- Adjusting the Image Height
- Image Shape
- Focusing the Image Using the Focus Lever
- Resizing the Image Using Zoom
- Selecting an Image Source
- Color Mode
- Turning On Automatic Luminance Adjustment
- Adjusting Light Output (Brightness)
- Adjusting Image Sharpness
- Using Advanced Image Adjustment Features
- Saving Settings to Memory and Using Saved Settings
- Controlling the Volume with the Volume Buttons
- Changing the Sound Mode
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When the Image is Not Rectangular
- Solutions When Only a Partial Image Appears
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Solutions to HDMI Link Problems
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Supported Video Display Formats
- Notices
- Quick Setup
- Warranty Update
31
Connecting Headphones
Parent topic: Setting Up the Projector
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an HDMI cable. The
video source's sound is output to the projector's speaker.
Note: You can also connect a computer or laptop to the projector using an HDMI cable.
Caution: Do not turn on the video source before connecting it to the projector; otherwise, you may
damage the projector.
1. Connect one end of an HDMI cable to your video source's HDMI port.
2. Connect the other end of the HDMI cable to the projector's HDMI port.
Parent topic: Projector Connections
Connecting to a USB Device
You can connect a USB device or cable to the projector's USB-A port to project images from the device.
Use the USB cable supplied with the device.
Note: Do not connect a USB hub or a USB cable longer than 9.8 feet (3 m), or the device may not
operate correctly.
Make sure the USB device meets the following requirements:
• The device must be a USB flash drive, USB hard drive, or a digital camera or smartphone
• Digital cameras and smartphones must be USB-mounted devices (not TWAIN-compliant) and must be
USB Mass Storage Unit compliant.