Owner's Manual
Table Of Contents
- User's Guide
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Remote Control Operation
- Selecting the Language for the Projector Menus
- Projection Modes
- Adjusting the Image Height
- Image Shape
- Focusing the Image Using the Focus Lever
- Resizing the Image Using Zoom
- Selecting an Image Source
- Color Mode
- Turning On Automatic Luminance Adjustment
- Adjusting Light Output (Brightness)
- Adjusting Image Sharpness
- Using Advanced Image Adjustment Features
- Saving Settings to Memory and Using Saved Settings
- Controlling the Volume with the Volume Buttons
- Changing the Sound Mode
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When the Image is Not Rectangular
- Solutions When Only a Partial Image Appears
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Solutions to HDMI Link Problems
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Supported Video Display Formats
- Notices
- Quick Setup
- Warranty Update
57
You see a screen like this:
5. Use the arrow buttons to adjust the value of the Gamma setting as follows:
• To brighten darker areas of the image, select higher gamma values. (Color saturation in the lighter
areas may become weaker.)
• To reduce overall image brightness and sharpen the image, select lower gamma values.
6. To adjust specific tones in the gamma using a graph, select the Custom setting and press Enter.
You see a screen like this: