Owner's Manual
Table Of Contents
- User's Guide
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Remote Control Operation
- Selecting the Language for the Projector Menus
- Projection Modes
- Adjusting the Image Height
- Image Shape
- Focusing the Image Using the Focus Lever
- Resizing the Image Using Zoom
- Selecting an Image Source
- Color Mode
- Turning On Automatic Luminance Adjustment
- Adjusting Light Output (Brightness)
- Adjusting Image Sharpness
- Using Advanced Image Adjustment Features
- Saving Settings to Memory and Using Saved Settings
- Controlling the Volume with the Volume Buttons
- Changing the Sound Mode
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When the Image is Not Rectangular
- Solutions When Only a Partial Image Appears
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Solutions to HDMI Link Problems
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Supported Video Display Formats
- Notices
- Quick Setup
- Warranty Update
87
Options Description
Illumination Turns off the indicators on the projector
Energy Save Standby Select On to send power to the connected USB device even
if the projector is in standby mode (when the power is off).
HDMI EQ Setting Adjusts the signal level of the HDMI input. Change the
setting if there is interference with the signal or if there is no
image.
Note: If there is no image when using a media streaming
device, select 1 as the setting value.
Screen Mirroring Settings
Setting Options Description
Display Name Up to 32 alphanumeric
characters
Sets the device name shown
when searching for the projector
Operation Mode Basic
Extended
Select Extended to display
additional settings
Adjust Image Quality 1 to 4 Adjusts the quality of the screen
mirroring image. Smaller
numbers emphasize quality;
larger numbers emphasize
speed.
Interrupt Connection On
Off
Select On to allow devices to
interrupt the screen mirroring
connection
Channel Various options Selects the wireless channel
used for screen mirroring.
Change the setting if you
experience interference.
Reset — Resets all settings on the Screen
Mirroring Settings menu
Parent topic: Adjusting the Menu Settings