User's Manual
Table Of Contents
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Remote Control Operation
- Selecting the Language for the Projector Menus
- Projection Modes
- Adjusting the Image Height
- Image Shape
- Focusing the Image Using the Focus Lever
- Resizing the Image Using Zoom
- Selecting an Image Source
- Color Mode
- Turning On Automatic Luminance Adjustment
- Adjusting Light Output (Brightness)
- Adjusting Image Sharpness
- Using Advanced Image Adjustment Features
- Saving Settings to Memory and Using Saved Settings
- Controlling the Volume with the Volume Buttons
- Changing the Sound Mode
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When the Image is Not Rectangular
- Solutions When Only a Partial Image Appears
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Solutions to HDMI Link Problems
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Supported Video Display Formats
- Notices
36
1. Connect the AC adapter to the projector's power inlet.
2. Plug the power cord into an electrical outlet and connect it to the AC adapter
The projector enters standby mode. This indicates that the projector is receiving power, but is not
turned on.
3. Press the power button on the projector or the projector remote control to turn on the projector.
The status light flashes blue as the projector warms up. After the projector is warmed up, the status
light stops flashing and turns blue.
Warning: Never look into the projector lens when the light is on. The light can damage your eyes
and is especially dangerous for children and pets.
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt and light that is reflected back into the lens can cause the
projector to malfunction.
The Welcome Guide is displayed the first time you turn on the projector. To display the guide again,
press the Settings button on the projector remote control and select Settings > Display > Welcome
Guide.
Parent topic: Using Basic Projector Features
Turning Off the Projector
Turn off the projector after use.