User's Manual
Table Of Contents
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Remote Control Operation
- Selecting the Language for the Projector Menus
- Projection Modes
- Adjusting the Image Height
- Image Shape
- Focusing the Image Using the Focus Lever
- Resizing the Image Using Zoom
- Selecting an Image Source
- Color Mode
- Turning On Automatic Luminance Adjustment
- Adjusting Light Output (Brightness)
- Adjusting Image Sharpness
- Using Advanced Image Adjustment Features
- Saving Settings to Memory and Using Saved Settings
- Controlling the Volume with the Volume Buttons
- Changing the Sound Mode
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When the Image is Not Rectangular
- Solutions When Only a Partial Image Appears
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Solutions to HDMI Link Problems
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- General Projector Specifications
- Projector Light Source Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Supported Video Display Formats
- Notices
68
• To display a slide show of all the images in a folder, press the arrow buttons to highlight the
Slideshow option at the bottom of the screen and press Enter.
Note: If any file names are longer than the display area or include unsupported symbols, the file
names may be shortened or changed only in the screen display.
5. While projecting, use the following commands to control the display as necessary:
• To rotate a displayed image, press the up or down arrow button.
• To move to the next or previous image, press the left or right arrow button.
6. To stop the display, follow the on-screen instructions or press the Esc button.
7. Turn off the USB device, if necessary, and then disconnect the device from the projector.
Parent topic: Projecting a PC Free Presentation
Starting a PC Free Movie Presentation
After connecting a USB device or digital camera to the projector, you can switch to the USB input source
and start your movie.
Note: You can change the operation options by highlighting Option at the bottom of the screen and
pressing Enter.
1. Press the Source Search button on the remote control.
2. Select the USB source.