Owner's Manual

153
Parent topic: Notices
Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
• Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid
standing in front of the projector so the bright light does not shine into your eyes.
• Do not place any flammable objects in front of the projector lens, otherwise, a fire may occur.
• Do not touch the lens with bare hands.
• Do not place the projector on an unstable cart, stand, or table or on a surface that is unable to support
its weight. Otherwise, it could fall or topple causing an accident and injury.
• If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using
mounting hardware designed for use with this projector. When installing the projector in a high
position, take measures to prevent it from falling by using wires to ensure safety in an emergency,
such as an earthquake, and to prevent accidents. If the projector is not installed correctly, the projector
could fall. This may result in injury or accidents. Contact your dealer to carry out the installation work.
• Failure to install the ceiling mount and projector may cause the projector to fall. After installing the
specific Epson mount that supports your projector, make sure you secure the mount to all of the
projector's ceiling mount fixing points. Also, secure the projector and the mounts using wire that is
strong enough to hold their weight.
• Do not install in locations where salt damage could occur, or in locations subject to corrosive gas such
as sulphuric gas from hot springs. Otherwise, corrosion could cause the projector to fall. It could also
cause the projector to malfunction.
• When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from
loosening and do not use oils or lubricants. This may cause the projector case to crack and the
projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and
could damage the projector.
• Do not install the projector in locations exposed to high humidity and dust, such as on a kitchen
counter, in the kitchen, or near a humidifier, or in locations exposed to oil smoke or steam. Doing so
could cause fire or electric shock.
Examples of environments that could cause the projector to fall due to case deterioration:
• Locations subject to excessive smoke or airborne oil particles, such as factories or kitchens
• Locations containing volatile solvents or chemicals, such as factories or laboratories
• Locations where the projector could be subjected to detergents or chemicals, such as factories or
kitchens