Owner's Manual
Table Of Contents
- User's Guide
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Monitoring and Controlling the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Adjusting the Image Height
- Adjusting the Image Position Using Lens Shift
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Adjusting Image Sharpness
- Adjusting the Projector's Brightness Level
- Turning On Dynamic Contrast
- Adjusting the Color Temperature
- Adjusting the RGB Offset and Gain
- Adjusting Gamma
- Adjusting the Hue, Saturation, and Brightness
- Adjusting Projector Features
- Adjusting the Menu Settings
- Using the Projector's Menus
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Installation Settings - Installation Menu
- Display Settings - Display Menu
- Feature Settings - Operation Menu
- Administration Settings - Management Menu
- Network Settings - Network Menu
- Image Quality Memory Settings - Memory Menu
- Initial Settings and Reset Options - Initial/All Settings Menu
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Image and Sound Syncing Problems
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
- Quick Setup
20
4 Information button (displays the Information screen)
5 Light Output button (displays the Light Output menu)
6 Link Menu button (displays the main menu of the connected device)
Control buttons (control playback and other features of connected devices that support the HDMI
CEC standard)
7 HDMI Link button (displays the Device Connections screen)
8 Lens button (cycles through lens adjustment options)
9 Color Mode button (displays the Color Mode menu)
10 Arrow buttons (navigates on-screen options)
11 Enter button (selects options)
12 Default button (returns selected setting to default value)
13 Menu button (accesses projector menu system)
14 Memory button (accesses the Memory menu)
15 Frame Int button (displays the Frame Interpolation menu)
16 RGBCMY button (displays the RGBCMY menu)
17 HDR button (displays the Dynamic Range menu)
18 Pattern button (displays a test pattern)
19 Lens1 and Lens2 buttons (loads the first or second saved lens position)
20 Esc button (cancels/exits functions or returns to previous screen)
21 Image Enh button (displays the Image Preset Mode menu)
22 Fine/Fast button (displays the Image Processing menu)
23 Aspect button (displays the Aspect menu)
24 Blank button (turns off video projection)
25 Illumination button (temporarily lights the remote control buttons)
Parent topic: Projector Part Locations