Owner's Manual
Table Of Contents
- User's Guide
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Monitoring and Controlling the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Adjusting the Image Height
- Adjusting the Image Position Using Lens Shift
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Adjusting Image Sharpness
- Adjusting the Projector's Brightness Level
- Turning On Dynamic Contrast
- Adjusting the Color Temperature
- Adjusting the RGB Offset and Gain
- Adjusting Gamma
- Adjusting the Hue, Saturation, and Brightness
- Adjusting Projector Features
- Adjusting the Menu Settings
- Using the Projector's Menus
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Installation Settings - Installation Menu
- Display Settings - Display Menu
- Feature Settings - Operation Menu
- Administration Settings - Management Menu
- Network Settings - Network Menu
- Image Quality Memory Settings - Memory Menu
- Initial Settings and Reset Options - Initial/All Settings Menu
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Image and Sound Syncing Problems
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
- Quick Setup
97
Setting Options Description
Signal Format Video Range Sets the video range to match the setting of
an input source connected to the HDMI
ports
Auto: detects the video range automatically
Limited (16–235): for brightness range
16–235
Full (0–255): for brightness range 0–255
Overscan Auto
Off
4%
8%
Changes the projected image ratio to make
the edges visible by a selectable
percentage or automatically when
projecting a component signal
Color Space Auto
BT.709
BT.2020
Sets the conversion system for the color
space (set to Auto for most cases)
Dynamic Range Dynamic Range
Signal Status
HDR10/HDR10+ Setting
HLG Setting
Dynamic Range: changes the range of
dark and bright areas in the image (set to
Auto for most cases)
Signal Status: displays the detected input
signal
HDR10/HDR10+ Setting: adjusts the PQ
curve of the dynamic range (available when
Dynamic Range or Signal Status is set to
HDR10 or HDR10+)
HLG Setting: adjusts the HLG curve of the
dynamic range (available when Dynamic
Range or Signal Status is set to HLG)