Owner's Manual
Table Of Contents
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Monitoring and Controlling the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Adjusting the Image Height
- Adjusting the Image Position Using Lens Shift
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Adjusting Image Sharpness
- Adjusting the Projector's Brightness Level
- Turning On Dynamic Contrast
- Adjusting the Color Temperature
- Adjusting the RGB Offset and Gain
- Adjusting Gamma
- Adjusting the Hue, Saturation, and Brightness
- Adjusting Projector Features
- Adjusting the Menu Settings
- Using the Projector's Menus
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Installation Settings - Installation Menu
- Display Settings - Display Menu
- Feature Settings - Operation Menu
- Administration Settings - Management Menu
- Network Settings - Network Menu
- Image Quality Memory Settings - Memory Menu
- Initial Settings and Reset Options - Initial/All Settings Menu
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Image and Sound Syncing Problems
- Solutions to Sound Problems
- Solving Projector or Remote Control Operation Problems
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices
144
Contrast ratio 2500000:1 with Dynamic Contrast on, Normal Light Output, Dynamic
Color Mode, Wide Zoom mode, and Lens Shift Vertical: –50% or
50% and Horizontal: Centered
Image size
(in native aspect ratio)
50 inches (1.27 m) to 300 inches (7.62 m)
Projection distance
(in native aspect ratio)
58 inches (1.47 m) to 748 inches (19 m)
Projection methods Front, rear, ceiling-mounted
Optical aspect ratio
(width-to-height)
16:9
Focus adjustment Powered
Zoom adjustment Optical, powered
Zoom ratio
(Tele-to-Wide)
1 to 2.1
Noise level 30 dB (Normal Light Output)
22 dB (ECO Light Output)
Keystone correction angle ± 30º vertical/horizontal
Service port compatibility USB 1.1 and 2.0 compliant for service and firmware update (USB
Mini-B cable)
USB-A port compatibility USB 1.1 and 2.0 compliant for connecting a streaming device,
saving error log files, batch settings, and firmware update with 5V/2A
power supply
Opt.HDMI port compatibility USB 1.1 and 2.0 compliant for an optical HDMI cable with 5V/300mA
power supply only (no USB function)
Trigger Out port 12V (200mA maximum)
Mono cable: tip and sleeve (monaural 2-pin), signal tip trigger + 12V
DC, sleeve GND
Stereo (TRS) cable: signal tip trigger + 12V DC, ring not connected,
sleeve GND
Parent topic: Technical Specifications