Network Router User Manual

Vigor3300 Series User’s Guide
70
F
F
o
o
r
r
8
8
0
0
2
2
.
.
1
1
Q
Q
V
V
L
L
A
A
N
N
Another way to set VLAN is based on 802.1Q. Please choose 802.1Q VLAN to open the
following page. This page is available only for the PCs with certain network cards which
support 802.1Q VLAN feature. It is useless for general network cards.
Active Check this box to activate the settings of this entry. If you check
the Management Port box below, Index 4 will be
unchangeable and locked. And, you have to set Port VLAN ID
for P4 previously before you check Management Port.
Name Specify the name for the four groups of VLAN.
VLAN ID Type a number used for identification on VLAN for your
computer. Later, you have to type the same ID number for each
PC which wants to be grouped within the same VLAN group.
In addition, if you type wrong ID number, the following
message will appear to warn you. Please type correct number.
By the way, if you don’t know how to configure a VLAN
setting on your computer, please refer to How to Check/Edit
VLAN ID on Your PC below for more detailed information.
Member To make the hosts (with the same VLAN ID) of different ports
communicating with each other, please check the port box (P1
to P4) according to your necessity.