User Manual

Adjusting the Menu Settings

Follow the instructions in these sections to access the projector menu system and change projector

settings.

Using the Projector's Menus

Image Quality Settings - Image Menu

Input Signal Settings - Signal Menu

Projector Feature Settings - Settings Menu

Projector Setup Settings - Extended Menu

Projector Information Display - Info Menu

Projector Reset Options - Reset Menu

Using the Projector's Menus

You can use the projector's menus to adjust the settings that control how your projector works. The

projector displays the menus on the screen.

1. Press the Menu button on the control panel or remote control.

You see the menu screen displaying the Image menu settings.

2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for

each menu are displayed on the right.

Note: The available settings depend on the current input source.

3. To change settings in the displayed menu, press Enter.

4. Press the up or down arrow button to move through the settings.

5. Change the settings using the buttons listed on the bottom of the menu screens.