XK3190-A1+P Weighing Indicator USER’ S GUIDE Attention: Please read this User’s Guide carefully when you use the indicator!
X K 3 1 9 0 - A 1+P 1 . Specifications 2 . Installation 2.1 Front & Back View of Indicator 2.2 Keyboard Function 2.3 Connecting Loadcell to Indicator 3. Calibration 4. Operating Instructions 4.1 Starting and Starting auto zero setting at turning on 4.2 Manual Zero Setting (Semi-automatically setting zero ) 4.3 Tare Function 4.4 Connecting Scoreboard to Indicator 4.5 Connecting Pinter to Indicator 4.6 Connecting Serial Communication port to Indicator 4.7 Setting of Time and Date 4.
X K 3 1 9 0 - A 1+P 1 Specification 1 Model XK3190-A1+ 2 Sample rated 5~25 times / sec 3 Load cell sensitivity 1~ 2mv/v 4 Division 5 Display 7-bits LED digital display 0.56” in character height and 7 status indicating.
X K 3 1 9 0 - A 1+P 2. Installation 2.
X K 3 1 9 0 - A 1+P 2.2 Keyboard Function 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Key [ACCU],[ UNIT PRICE] Function No meaning In calibration mode, pressing [PRE-TARE/2] , can input digital key “2”; In weighing mode, the key is used for presetting tare. [DELETE/4] In calibration mode, pressing [DELETE/4], can input digital key “4”; In weighing mode, it is deleting function key , more details shown in episode “deleting”.
X K 3 1 9 0 - A 1+P 15 In calibration or parameters setting mode, pressing [weigh], it will exit from original calibration or setting mode and return to weighing mode. 2.3 Connecting Loadcell to Indicator 1. The 9-pin socket is used for the link-up of loadcell, which has been clearly shown in the graph 2-3. 2. The 4-pin shielded cable is used, +S must be short connected with +E, -S and -E. The indicator does not have the function of long distance compensation. 3.
X K 3 1 9 0 - A 1+P 3. Calibration According to the Graph 2-3, connecting Indicator and loadcell, and the indicator enters weighing mode. 1. Connecting calibration jumper to the 15- pin socket on the indicator back panel. (There is a 15-pin plug in the packing carton with its 14-pin short connected with 15-pin. ) 2. According to table 4-3, carry out calibration step by step.
X K 3 1 9 0 - A 1+P step 8 9 10 Operation press [ 1 ] [ 5 ] [ 0 ] [0 ] press [ Enter ] press [ Enter ] press [2] [0] [0][0] [0] press [ Enter ] 11 press [ Enter ] press [ Enter ] press [ Enter ] 12 press [ 1 ] press [ Enter ] 13 press [ 1 ] press [ Enter ] 14 press [ 0 ] press [ Enter ] 15 Display Explanation [ A LoAd1] Loading weight ≥ 5% Max.。 [ d 1500 ] Example: 1500 After stable light is on, press [ Enter ] key. [ noLoAd ] Confirming zero position again.
X K 3 1 9 0 - A 1+P out. 4. . Operating Instructions 4.1 4.2 Power on 1 When using AC power , power on , setting the ship- form switch at the back cover of the indicator on “1” ; If using DC power , setting the ship- form switch at the back cover of indicator on “1”, then pressing the recover switch, the indicator will perform “999999 - 000000 ” selfchecking. And then enter weighing mode. Or after pressing any key, self-checking stops and enters weighing mode automatically.
X K 3 1 9 0 - A 1+P (Graph 4-1) Serial Communication port and score display port 4.4 Connecting Scoreboard to Indicator 1. The display interface of scoreboard is 15-pin socket, which has been clearly shown in the Graph 4-1. 2. The scoreboard signal is 20mA continuous current loop, outputting in binary code, the baud rate is 600. 4.5 Connecting Printer to Indicator 1. The print port adopts parallel output and 25-pin connecting socket, which has been clearly shown in the Graph 4-3.
X K 3 1 9 0 - A 1+P ▲ The printer must be compatible to the indicator, please choose the recommended printer. ▲ The printer GND can not be connected to the power GND, otherwise the indicator or printer will be destroyed. 3.
X K 3 1 9 0 - A 1+P Press[Enter] [ dct End ] 1: use discount Note: You can use discount only when the blank filling mode is selected. 4. print and print format Press [PRINT] key, you can print required weighing data according to print setting. Record Format: Weight Bill Date 97-01-31 NO. Time Gross ( kg ) Tare ( kg ) Net ( kg ) Accumulating(kg) 0001 08.56.16 299.98 1 298.98 298.98 0002 09.00.09 299.98 2 297.98 596.96 0003 09.00.28 299.98 3 296.98 893.94 Document Format Weight Bill NO.
X K 3 1 9 0 - A 1+P REMARK ★ If setting the odE parameter to 1, you can perform the blank filling priting, at this time the other priting formats are invalid (Records format and document format are invalid). Method: pushing [print] key, if dct parameter is set to 1, it will display [BFL **], inputting the discount rate and pushing [Input], it will print out the blank filling report: if dct parameter is set to 0, it will print out the blank filling report directly, ‘discount rate’ will be in blank.
X K 3 1 9 0 - A 1+P communication mode parameters. (2) The sequence of parameters setting as following: Connecting the loadcell , the indicator enters into working mode which is shown in the Graph 2-3. Insert the setting jumper into 15-pin socket at the back of indicator. (There is a 15-pin plug in the packing carton with its 14-pin shorte connected with 15-pin. ).
X K 3 1 9 0 - A 1+P [ Enter] key or [weighing] key to exit. If it is incorrect, using digital keys enters new date , then press [ Enter ] key. （2） Under weighing status of the indicator, press [ Time ] key, and Time sign lamp is lighted. Indicator display original Time data at this time. If it is correct, then press [ Enter ] key or the [ weighing ] key to exit. If it is incorrect, using digital keys enters new time data, then press [ Enter ] key. 4.8 Weight data store, check and clear 1 Data storing.
X K 3 1 9 0 - A 1+P 3 Clear Press [ clear ] key, can clean accumulating weight value or stored data. Step 1 Operating Display Explanation [ sure 0 ] Selecting clear/not clear 0: no 1: yes Example: 1 press [ Clear ] 2 press [ 1 ] [ sure 1 ] [ sure 1 ] End 4.9 Insufficient voltage indicating When the storage cell voltage is insufficient, the insufficient voltage lamp is on. At this time the indicator will twinkle.
X K 3 1 9 0 - A 1+P electronic components will be damaged and electric shock is likely to happen. 5.6 You should cut off power supply of indicator and relevant device before you pull-in and out the connecting line of indicator and external device. ▲ ！You must cut off power supply of the indicator , before you plug the connecting line of the loadcell in and out. ▲ ！You must cut off power supply of the indicator and the printer, before you plug in connecting line of the printer.
X K 3 1 9 0 - A 1+P 6.3 Wrong setting information indicating 1 Err 13 Wrong setting of the division value . 2 Err 14 Decimal point must be less than 5, please reset the decimal bit. 3 Err 15 Overload warning must be > 100, please reset it. Err 6.4 1 17 Enter new data which should be less than 65000. Wrong connection information indicating Err P It means the printer has trouble or is wrongly connected. push any key to quit.
X K 3 1 9 0 - A 1+P 3 Err 21 Calibrating data have been lost in RAM and EPROM, Operator must put in the calibration plug, then reenter the original calibration data, turn on the indicator again or re-calibrate it. 4 Err 22 5 Err 23 6.6 1. EPROM has been damaged. RAM has been damaged. Other information indicating Err 24 In normal operation, you must pull off the calibration jumper.The indicator is under normal operation, and the calibration jumper shouldn’t be put in.
X K 3 1 9 0 - A 1+P The frame from the computer consists of 6 data explanation 1 02 (X ON) start 2 A~Z address 3 A: Shaking hands B: asking GW C: asking tare D: asking NW E: asking accumulated times and accumulated weight 4 XRL checking 5 XRL checking 6 03 (X OFF) XRL = 2 ⊕3 end
X K 3 1 9 0 - A 1+P The explanation of data No : 4 - n Command No data Each frame consists of 6 groups of data A Command GW: B +/- Each frame consists of 14 groups of data GW data (6 bits) . . . GW data Decimal position Command Tare: C +/- Each frame consists of 14 groups of data Tare data . . . Tare data Decimal position Command D NW: +/NW data . . .
X K 3 1 9 0 - A 1+P Command E Accumulated times and weigh Accumulated times (4 bits ) . . . , (comma) separation mark Accumulated weight (10 bits ) . .
