User`s guide

Error Indicators

Error Messages on the Control Panel

This section describes the meaning of messages displayed on the LCD screen.

Messages Solutions

Paper Jam

& “Paper Jams” on page 88

Printer Error Turn the product off and then back on. Make sure that no paper is

still in the product. If the error still appears, contact Epson Support.

Maintenance box is at the end of its service life.

You need to replace it.

Replace the maintenance box.

& “Replacing Maintenance Box” on page 73

Invalid IP address and subnet mask. Refer the online Network Guide.

Memory Full Reduce the size of the print job.

Recovery Mode The firmware update has failed. You will need to re-attempt the

firmware update. Ready a USB cable and visit your local Epson

website for further instructions.

& “Where To Get Help” on page 118

User’s Guide

Error Indicators