Operation Manual

Note:
If you cannot move the edge guide, the part on the right side may not be in the correct position. Slide the edge guide to
the far
le,
slide the part on the right side to the far right, and then try again.
5.
On the control panel, set the size and type of the paper you loaded in the rear paper feed.
Note:
❏ You can also display the paper size and paper type settings screen by selecting Menu > Printer Setup > Paper
Source Settings > Paper Setup.
❏ Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Handling Precautions” on page 23
& “Available Paper and Capacities” on page 24
User's Guide
Loading Paper
28