User's Guide NPD5427-00 EN
User's Guide Copyright Copyright No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information herein.
User's Guide Trademarks Trademarks ❏ EPSON is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION is a trademark of Seiko Epson Corporation. ® ❏ EPSON Scan software is based in part on the work of the Independent JPEG Group. ❏ libtiff Copyright © 1988-1997 Sam Leffler Copyright © 1991-1997 Silicon Graphics, Inc.
User's Guide Contents Contents Placing Originals on the ADF. . . . . . . . . . . . . . . . . 32 Placing Originals on the Scanner Glass. . . . . . . . . . 33 Copyright Trademarks Printing Printing from a Computer. . . . . . . . . . . . . . . . . . . 35 Printing Basics - Windows. . . . . . . . . . . . . . . . . 35 Printing Basics - Mac OS X. . . . . . . . . . . . . . . . .36 Printing on 2-Sides. . . . . . . . . . . . . . . . . . . . . . .38 Printing Several Pages on One Sheet. . . . . . . . . .
User's Guide Contents Registering Contacts On a Computer. . . . . . . . . 71 Backing up Contacts Using a Computer. . . . . . . 71 Sending Faxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Basic Fax Sending Operations. . . . . . . . . . . . . . .72 Various Ways of Sending Faxes. . . . . . . . . . . . . . 73 Receiving Faxes. . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Setting Receiving Mode. . . . . . . . . . . . . . . . . . . 74 Various Ways of Receiving Faxes. . . . . . . . . . . .
User's Guide Contents Power and Control Panel Problems. . . . . . . . . . . . 116 Power Does Not Turn On. . . . . . . . . . . . . . . . . 116 Power Does Not Turn Off. . . . . . . . . . . . . . . . . 116 Power Turns Off Automatically. . . . . . . . . . . . . 116 LCD Screen Gets Dark. . . . . . . . . . . . . . . . . . . 116 Printer Does Not Print. . . . . . . . . . . . . . . . . . . . . 116 Printout Problems. . . . . . . . . . . . . . . . . . . . . . . . 117 Print Quality Is Poor. . . . . . . . . . . . . . .
User's Guide About This Manual About This Manual Introduction of Manuals The following manuals are supplied with your Epson printer. As well as the manuals, see the help included in the various Epson software applications. ❏ Important Safety Instructions (paper manual) Provides you with instructions to ensure the safe use of this printer. ❏ Start Here (paper manual) Provides you with information on setting up the printer and installing the software.
User's Guide About This Manual Descriptions Used in this Manual ❏ Screenshots of the printer driver and the EPSON Scan (scanner driver) screens are from Windows 8.1 or Mac OS X v10.9.x. The content displayed on the screens varies depending on the model and situation. ❏ Illustrations of the printer used in this manual are examples only. Although there may be slight differences depending on the model, the method of operation is the same.
User's Guide Important Instructions Important Instructions Safety Instructions Read and follow these instructions to ensure safe use of this printer. Make sure you keep this manual for future reference. Also, be sure to follow all warnings and instructions marked on the printer. ❏ Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following Web site to learn the meaning of the symbols. http://support.epson.
User's Guide Important Instructions Printer Advisories and Warnings Read and follow these instructions to avoid damaging the printer or your property. Make sure you keep this manual for future reference. Advisories and Warnings for Setting Up/Using the Printer ❏ Do not block or cover the vents and openings in the printer. ❏ Use only the type of power source indicated on the printer's label. ❏ Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
User's Guide Important Instructions ❏ Before transporting the printer, make sure that the print head is in the home (far right) position and the ink cartridges are in place. ❏ If you are not going to use the printer for a long period, be sure to unplug the power cord from the electrical outlet. Advisories and Warnings for Using the Printer with a Wireless Connection ❏ Radio waves from this printer may negatively affect the operation of medical electronic equipment, causing them to malfunction.
User's Guide Printer Basics Printer Basics Part Names and Functions A ADF (Automatic Document Feeder) cover Open when removing jammed originals in the ADF. B ADF input tray Feeds originals automatically. C ADF edge guide Feeds originals straight into the printer. Slide to the edge of the originals. D ADF output tray Holds originals ejected from the ADF. E Paper cassette Loads paper. A Output tray Holds the ejected paper.
User's Guide Printer Basics B Edge guides Feeds the paper straight into the printer. Slide to the edges of the paper. C Paper cassette Loads paper. A Document cover Blocks external light while scanning. B Scanner glass Place the originals. C Control panel Operates the printer. A Scanner unit Scans placed originals. Open when replacing ink cartridges or removing jammed paper inside the printer. B Ink cartridge holder Install the ink cartridges.
User's Guide Printer Basics A Rear cover Remove when removing jammed paper. B USB port Connects a USB cable. C AC inlet Connects the power cord. D LINE port Connects a phone line. E EXT. port Connects external phone devices. Control Panel Buttons and Lights A Turns the printer on or off. Unplug the power cord when the power light is off. B Displays the home screen. C Enter the last dialed number or enter a pause when entering a fax number. D Stops the current operation.
User's Guide Printer Basics F l, u, r, d, OK G H Press l, u, r, and d to select menus. Press OK to confirm your selection or run the selected feature. Returns to the previous screen. 0-9 Enters numbers, characters, and symbols. , I Opens the contacts list. J Starts printing, copying, scanning, and faxing in black and white. K Starts printing, copying, scanning, and faxing in color.
User's Guide Printer Basics Icons Descriptions l Deletes a character to the left (backspace). OK Confirms the entered characters. Enters a pause (pauses for three seconds) while dialing. A hyphen (-) is entered as the pause mark. Menu Options Copy Mode Note: ❏ Available menus vary depending on the layout you selected. ❏ Press the OK button to display hidden setting menus. Menu Settings and Explanations Number of copies Enter the number of copies.
User's Guide Printer Basics Menu Settings and Explanations Document Orientation Select the orientation of your original. Quality Select the type of your original. Text: Provides faster printing, but the printouts may be faint. Photo: Provides higher quality printing, but the printing speed may be slower Density Set the density of your copies. Layout Order Select the copy layout for multiple pages when you have selected 2-up as the Layout setting. Dry Time Select the drying time.
User's Guide Printer Basics Menu Settings and Explanations Resolution Select the resolution of the outgoing fax. Select Photo for originals that contain both text and photo images. Density Set the density of the outgoing fax. Direct Send See the page that describes this feature for more details. Transmission Report Prints a transmission report automatically after you send a fax. Select Print on Error to print a report only when an error occurs.
User's Guide Printer Basics Menu Settings and Explanations Maintenance Print Head Nozzle Check Prints a pattern to check if the print head nozzles are clogged. Print Head Cleaning Cleans clogged nozzles in the print head. Ink Cartridge(s) Replacement Replaces the ink cartridge. Print Head Alignment Adjusts the print head to improve print quality. Run Vertical Alignment if your printouts look blurry or text and lines are misaligned.
User's Guide Printer Basics Menu Settings and Explanations Common Settings Sound Adjust the volume and select the type of audio. Sleep Timer Select the time period before the printer enters sleep mode (energy saving mode) when no operations are performed. The LCD screen turns black when the set time passes. Power Off Settings Your product may have this feature or the Power Off Timer feature depending on the location of purchase.
User's Guide Printer Basics Menu Settings and Explanations Network Settings Network Status Displays or prints the network settings and connection status. Wi-Fi Setup Wi-Fi Setup Wizard See the Network Guide for more details. Push Button Setup (WPS) PIN Code Setup (WPS) Wi-Fi Auto Connect Disable Wi-Fi You may be able to resolve network problems by disabling the Wi-Fi settings or making the Wi-Fi settings again. See the Network Guide for more details.
User's Guide Printer Basics Menu Settings and Explanations Eco Mode The following Eco mode settings are available. When these settings are disabled, the settings made in Common Settings are applied. Sleep Timer Select the time period before the printer enters sleep mode (energy saving mode) when no operations are performed. The LCD screen turns black when the set time passes. 2-Sided (Copy) Restore Default Settings Sets 2-sided copying as the default setting.
User's Guide Printer Basics Menu Settings and Explanations Output Settings Fax Output Saves received documents on a computer. You need to make settings on FAX Utility on a computer. Auto Reduction Reduces large received documents to fit on the paper in the paper source. Reducing may not always be possible depending on the received data. If this is turned off, large documents are printed at their original size on multiple sheets, or a blank second page may be ejected.
User's Guide Printer Basics Menu Settings and Explanations Basic Settings Fax Speed Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP (VoIP) phone service. ECM Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by telephone line noise. If this is disabled, you cannot send or receive documents in color.
User's Guide Printer Basics Menu Description Menu Registers contacts and a contact group, or prints the contacts list.
User's Guide Loading Paper Loading Paper Paper Handling Precautions ❏ Read the instruction sheets supplied with the paper. ❏ Fan and align the edges of the paper before loading. Do not fan or curl photo paper. Doing so may damage the printable side. ❏ If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled paper may cause paper jams and smears on the printout.
User's Guide Loading Paper Available Paper and Capacities Epson recommends using genuine Epson paper to ensure high-quality printouts. Genuine Epson Paper Media Name Size Loading Capacity (Sheets) 2-Sided Printing Borderless Printing Epson Bright White Ink Jet Paper A4 120 Auto, Manual*1 - Epson Ultra Glossy Photo Paper A4, 13×18 cm (5×7 in.), 10×15 cm (4×6 in.) 20*2 - ✓ Epson Premium Glossy Photo Paper A4, 13×18 cm (5×7 in.), 16:9 wide size (102×181 mm), 10×15 cm (4×6 in.
User's Guide Loading Paper Media Name Size Loading Capacity (Sheets or Envelopes) 2-Sided Printing Borderless Printing Envelope Envelope #10, Envelope DL, Envelope C6 10 - - *1 You can load up to 30 sheets for paper with one side already printed. *2 You can load up to 1 sheet for paper with one side already printed. List of Paper Types To obtain optimum printing results, select the paper type that suits the paper.
User's Guide Loading Paper 2. Slide the edge guides to their maximum position. Note: When using paper larger than A4 size, extend the paper cassette. 3. Slide the front edge guide to the paper size you want to use. 4. With the printable side facing down, load paper against the front edge guide. c Important: ❏ Make sure the paper does not extend beyond the triangle symbol at the end of the paper cassette. ❏ Do not load more than the maximum number of sheets specified for the paper.
User's Guide Loading Paper ❏ Envelopes ❏ Pre-punched paper Note: You can use pre-punched paper under the following conditions. Automatic 2-sided printing is not available for prepunched paper. ❏ Loading capacity: One sheet ❏ Available size: A4, B5, A5, A6, Letter, Legal ❏ Binding holes: Do not load paper with the binding holes at the top or the bottom. Adjust the print position of your file to avoid printing over the holes. 5. Slide the side edge guides to the edges of the paper. 6.
User's Guide Loading Paper 8. Slide out the output tray.
User's Guide Placing Originals Placing Originals Place originals on the scanner glass or the ADF. Use the scanner glass for originals that the ADF does not support. You can scan multiple originals at the same time with the ADF.
User's Guide Placing Originals 3. Place the originals face up in the ADF. c Important: ❏ Do not load originals above the line just under the d symbol inside the ADF edge guide. ❏ Do not add originals while scanning. 4. Slide the ADF edge guide to the edge of the originals. Related Information & “Available Originals for the ADF” on page 32 Placing Originals on the Scanner Glass ! Caution: Be careful not to trap your fingers when closing the document cover. Otherwise you may be injured.
User's Guide Placing Originals 1. Open the document cover. 2. Remove any dust or stains on the scanner glass. 3. Place the original face-down and slide it to the corner mark. Note: ❏ A range of 1.5 mm from the edges of the scanner glass is not scanned. ❏ When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF. 4. Close the cover gently. Note: Remove the originals after scanning or copying.
User's Guide Printing Printing Printing from a Computer Printing Basics - Windows Note: ❏ See the online help for explanations of the setting items. Right-click an item, and then click Help. ❏ Operations may differ depending on the application. See the application's help for details. 1. Load paper in the printer. c Important: Make the paper settings on the control panel. 2. Open the file you want to print. 3. Select Print or Print Setup from the File menu. 4. Select your printer. 5.
User's Guide Printing ❏ Borderless: Select to print with no margins around the image. ❏ Orientation: Select the orientation you set in the application. ❏ Paper Type: Select the type of paper you loaded. ❏ Color: Select Grayscale when you want to print in black or shades of gray. Note: ❏ If you are printing high-density data on plain paper, letterhead, or preprinted paper, select Standard-Vivid as the Quality setting to make your printout vivid.
User's Guide Printing 3. Select Print from the File menu or another command to access the print dialog. If necessary, click Show Details or d to expand the print window. 4. Make the following settings. ❏ Printer: Select your printer. ❏ Preset: Select when you want to use the registered settings. ❏ Paper Size: Select the paper size you set in the application. When printing with no margins, select a "borderless" paper size. ❏ Orientation: Select the orientation you set in the application.
User's Guide Printing 5. Select Print Settings from the pop-up menu. Note: On Mac OS X v10.8.x or later, if the Print Settings menu is not displayed, the Epson printer driver has not been installed correctly. menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the Select System Preferences from the printer, and then add the printer again. See the following to add a printer. http://epson.sn 6. Make the following settings. ❏ Media Type: Select the type of paper you loaded.
User's Guide Printing ❏ Automatic 2-sided printing ❏ Manual 2-sided printing (for Windows only) When the printer has finished printing the first side, flip the paper over to print on the other side. You can also print a booklet that can be created by folding the printout. (For Windows only) Note: ❏ This feature is not available for borderless printing. ❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
User's Guide Printing 6. Click Print Density, select the document type from Select Document Type, and then click OK. The printer driver automatically sets the Adjustments options for that document type. Note: ❏ Printing may be slow depending on the combination of options selected for Select Document Type in the Print Density Adjustment window and for Quality on the Main tab. ❏ For manual 2-sided printing, the Print Density Adjustment setting is not available. 7.
User's Guide Printing Printing Several Pages on One Sheet You can print two or four pages of data on a single sheet of paper. Printing Several Pages on One Sheet - Windows Note: This feature is not available for borderless printing. 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the printer driver window. 4. Select 2-Up or 4-Up as the Multi-Page setting on the Main tab. 5. Click Page Order, make the appropriate settings, and then click OK to close the window. 6.
User's Guide Printing 5. Set the number of pages in Pages per Sheet, the Layout Direction (page order), and Border. 6. Set the other items as necessary. 7. Click Print. Related Information & “Loading Paper in the Paper Cassette” on page 28 & “Printing Basics - Mac OS X” on page 36 Printing to Fit the Paper Size You can print to fit the paper size you loaded in the printer. Printing to Fit the Paper Size - Windows Note: This feature is not available for borderless printing. 1.
User's Guide Printing Related Information & “Loading Paper in the Paper Cassette” on page 28 & “Printing Basics - Windows” on page 35 Printing to Fit the Paper Size - Mac OS X 1. Load paper in the printer. 2. Open the file you want to print. 3. Access the print dialog. 4. Select the size of the paper you set in the application as the Paper Size setting. 5. Select Paper Handling from the pop-up menu. 6. Select Scale to fit paper size. 7.
User's Guide Printing 6. Click Print. The Job Arranger Lite window is displayed and the print job is added to the Print Project. 7. With the Job Arranger Lite window opened, open the file that you want to combine with the current file, and then repeat steps 3 to 6. Note: ❏ If you close the Job Arranger Lite window, the unsaved Print Project is deleted. To print later, select Save from the File menu.
User's Guide Printing 6. Set the other items on the Main and More Options tabs as necessary, and then click OK. 7. Click Print. Related Information & “Loading Paper in the Paper Cassette” on page 28 & “Printing Basics - Windows” on page 35 Making Posters Using Overlapping Alignment Marks Here is an example of how to make a poster when 2x2 Poster is selected, and Overlapping Alignment Marks is selected in Print Cutting Guides.
User's Guide Printing 1. Prepare Sheet 1 and Sheet 2. Cut off the margins of Sheet 1 along the vertical blue line through the center of the top and bottom cross marks. 2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets together from the back.
User's Guide Printing 3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the left of the cross marks). 4. Tape the sheets together from the back. 5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together.
User's Guide Printing 6. Cut off the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the left and right side cross marks. 7. Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then temporarily tape them together from the back.
User's Guide Printing 8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line above the cross marks). 9. Tape the sheets together from the back.
User's Guide Printing 10. Cut off the remaining margins along the outer guide. Printing Using Advanced Features This section introduces a variety of additional layout and printing features available on the printer driver. Related Information & “Windows Printer Driver” on page 98 & “Mac OS X Printer Driver” on page 100 Adding a Printing Preset to Print Easily If you create your own preset of frequently used print settings on the printer driver, you can print easily by selecting the preset from the list.
User's Guide Printing Windows To add your own preset, set items such as the Document Size and Paper Type on the Main or More Options tab, and then click Add/Remove Presets in Printing Presets. Note: To delete an added preset, click Add/Remove Presets, select the preset name you want to delete from the list, and then delete it. Mac OS X Access the print dialog. To add your own preset, set items such as the Paper Size and Media Type, and then save the current settings as the preset in the Presets setting.
User's Guide Printing Mac OS X Access the print dialog. Select Color Matching from the pop-up menu, and then select EPSON Color Controls. Select Color Options from the pop-up menu, and then select one of the available options. Click the arrow next to Advanced Settings and make the appropriate settings. Printing an Anti-Copy Pattern (for Windows Only) You can print documents with invisible letters such as "Copy".
User's Guide Printing Note: ❏ By printing on genuine Epson photo paper, the ink quality is maximized and the printouts are vivid and clear. ❏ To perform borderless printing using a commercially available application, make the following settings. ❏ Create the image data to fully fit the paper size and if a margin setting is available in the application you are using, set the margin to 0 mm. ❏ Enable the borderless printing setting in the printer driver.
User's Guide Printing The following screens are subject to change without notice. A Home screen displayed when the application is started. B Displays information on how to setup the printer and a FAQ. C Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time. D Select what you want to print such as photos, documents, and web pages.
User's Guide Printing Using AirPrint AirPrint enables instant wireless printing from iPhone, iPad, and iPod touch with the latest version of iOS, and Mac with the latest version of OS X. 1. Load paper in your product. 2. Set up your product for wireless printing. See the link below. http://epson.sn 3. Connect your Apple device to the same wireless network that your product is using. 4. Print from your device to your product. Note: For details, see the AirPrint page on the Apple website.
User's Guide Printing 2. Select the Maintenance tab. 3. Click Print Queue. 4. Right-click on the job you want to cancel and then select Cancel. Related Information & “Windows Printer Driver” on page 98 Canceling Printing - Mac OS X 1. Click the printer icon in the Dock. 2. Select the job you want to cancel. 3. Cancel the job. ❏ Mac OS X v10.8.x or later Click next to the progress meter. ❏ Mac OS X v10.6.8 to v10.7.x Click Delete.
User's Guide Copying Copying 1. Load paper in the printer. 2. Place the originals. 3. Enter Copy from the home screen. 4. Press the u and d buttons to enter the number of copies. 5. Press the OK button. 6. Select Layout, and then select the appropriate layout. 7. Press the d button, and then make other settings as necessary. 8. Press the x button.
User's Guide Scanning Scanning Scanning Using the Control Panel Scanning to the Cloud You can send scanned images to cloud services using Epson Connect. See the Epson Connect portal website for details. https://www.epsonconnect.com/ http://www.epsonconnect.eu (Europe only) Related Information & “Scan Mode” on page 17 Scanning to a Computer c Important: Make sure you have installed the EPSON Scan and Epson Event Manager on your computer before using this feature. 1. Place the originals. 2.
User's Guide Scanning Scanning to a Computer (WSD) Note: ❏ This feature is only available for computers running Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista. ❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature. See the Network Guide for more details. 1. Place the originals. Note: If you want to scan multiple originals, place all of the originals on the ADF. 2. Enter Scan from the home screen. 3. Select Computer (WSD). 4.
User's Guide Scanning 3. Select Office Mode from the Mode list. 4. Make the following settings on the Main Settings tab. ❏ Document Source: Select the document source in which you placed your original. ❏ Size: Select the size of your original. ❏ Image Type: Select the type of image you want to scan. ❏ Resolution: Select the resolution of the image you want to scan. 5. Click Preview. The preview window opens.
User's Guide Scanning Note: When you select PDF as the Image Format setting, you can set a password to protect the file. Click Options, select the Security tab, and then make settings. Related Information & “Placing Originals” on page 32 & “EPSON Scan (Scanner Driver)” on page 101 Scanning in Professional Mode You can scan images while adjusting the quality and color. This mode is recommended for advanced users. 1. Place the originals.
User's Guide Scanning 3. Select Professional Mode from the Mode list. 4. Make the following settings. ❏ Document Source: Select the document source in which you placed your original. ❏ Auto Exposure Type: Select the exposure type that suits your original. ❏ Image Type: Select the type of image you want to scan. ❏ Resolution: Select the resolution of the image you want to scan. ❏ Target Size: Select the output image size you want to scan to.
User's Guide Scanning 5. Click Preview. The preview window opens. Note: If you are using an ADF, load the entire original, including the original you have previewed. 6. Check the preview, and adjust the image as necessary. Note: You can make various image adjustments such as improving the color, sharpness, and contrast. 7. Click Scan. 8. In the File Save Settings window, make appropriate settings and then click OK. The scanned image is saved in the specified folder.
User's Guide Scanning The following screens are subject to change without notice. A Home screen displayed when the application is started. B Displays information on how to setup the printer and a FAQ. C Displays the screen where you can select the printer and make printer settings. Once you have selected the printer, you do not need to select it again from the next time. D Displays the scanning screen. E Displays the screen where you can make scan settings such as resolution.
User's Guide Faxing Faxing Setting Up a Fax Connecting to a Phone Line Compatible Telephone Lines You can use the printer over standard analogue telephone lines (PSTN = Public Switched Telephone Network) and PBX (Private Branch Exchange) telephone systems. You may not be able to use the printer with the following phone lines or systems.
User's Guide Faxing Connecting to a Standard Phone Line (PSTN) or PBX Connect a phone cable from the telephone wall jack or PBX port to the LINE port on the back of the printer. Related Information & “Making Settings for a PBX Phone System” on page 70 Connecting to DSL or ISDN Connect a phone cable from the DSL modem or the ISDN terminal adapter to the LINE port on the back of the printer. See the documentation provided with the modem or the adapter for more details.
User's Guide Faxing Connecting Your Phone Device to the Printer When using the printer and your telephone on a single phone line, connect the telephone to the printer. Note: ❏ If your phone device has a fax function, disable the fax function before connecting. See the documentation provided with the phone device for more details. ❏ Set the number of Rings to Answer before receiving faxes to a larger number than for the answering machine. 1. Remove the cap from the EXT. port on the back of the printer.
User's Guide Faxing c Important: When sharing a single phone line, make sure you connect the phone device to the EXT. port of the printer. If you split the line to connect the phone device and the printer separately, the phone and the printer do not work correctly. 3. Pick up the handset of the connected phone device and confirm that a message asking you to select whether to send or receive a fax is displayed on the LCD screen.
User's Guide Faxing Note: ❏ Distinctive ring services, offered by many telephone companies (the service name differs by company), allows you to have several phone numbers on one phone line. Each number is assigned a different ring pattern. You can use one number for voice calls and another for fax calls. Select the ring pattern assigned to fax calls in DRD. ❏ Depending on the region, On and Off are displayed as the DRD options. Select On to use the distinctive ring feature. 7.
User's Guide Faxing Making Settings for a PBX Phone System Make the following settings when using the printer in offices that use extensions and require external access codes, such as 0 and 9, to get an outside line. 1. Enter Setup from the home screen. 2. Select Fax Settings > Basic Settings > Line Type. 3. Select PBX. 4. Select Use as the access code. 5. On the Access Code screen, enter the external access code used for your phone system, and then press the OK button.
User's Guide Faxing 6. Press the OK button to register a contact. Note: To edit or delete an entry, select the target entry, press the r button, and then select Edit or Delete. Registering Grouped Contacts Adding contacts to a group allows you to send a fax to multiple destinations at the same time. button in the Fax mode. 1. Press the 2. Press , and then select Add Group. 3. Select the entry number that you want to register. 4. Enter a name, and then press the OK button. 5.
User's Guide Faxing Sending Faxes Basic Fax Sending Operations Send faxes in color or monochrome (B&W). Note: If the fax number is busy or a problem occurs, the printer automatically redials twice after one minute. Sending Faxes Using the Control Panel 1. Place the originals. Note: You can send up to 100 pages in one transmission; however depending on the remaining amount of memory, you may not be able to send faxes even with less than 100 pages. 2. Enter Fax from the home screen. 3.
User's Guide Faxing Sending Faxes Dialing from the External Phone Device You can send a fax by dialing using the connected telephone when you want to talk over the phone before sending a fax, or when the recipient's fax machine does not switch to the fax automatically. 1. Place the originals. Note: You can send up to 100 pages in one transmission; 2. Pick up the handset of the connected telephone. 3. Select Send on the printer's control panel, and then dial the recipient's fax number using the phone.
User's Guide Faxing 8. Press the x button. Note: Until the fax is sent at the specified time, you cannot send other faxes. To cancel the fax, press the y button on the fax mode top screen, and then press the u button. Related Information & “Sending Faxes Using the Control Panel” on page 72 & “Placing Originals” on page 32 & “Fax Mode” on page 17 Sending Many Pages of a Monochrome Document (Direct Send) When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
User's Guide Faxing ❏ Manual: Recommended for users who do not fax often, or who want to receive a fax after answering calls with the connected telephone. When receiving a fax, pick up the handset, and then operate the printer. Note: If you enable the Remote Receive feature, you can start receiving a fax just by using the connected telephone.
User's Guide Faxing The Remote Receive feature is available for telephones that support tone dialing. Related Information & “Receiving Faxes Manually” on page 75 Setting Up Remote Receive 1. Enter Setup from the home screen. 2. Select Fax Settings > Receive Settings > Remote Receive. 3. After enabling Remote Receive, enter a two digit code (0 to 9, *, and # can be entered). 4. Press the OK button. Using Remote Receive 1. When the telephone rings, pick up the handset. 2.
User's Guide Faxing c Important: ❏ Set the printer's receive mode to Auto. ❏ Try not to let your computer enter sleep mode. If the computer is left in sleep mode or if it is turned off, the printer temporarily saves received documents and may result in a memory full error that disables sending and receiving faxes. 1. Start FAX Utility on the computer connected to the printer. 2. Open the setting screen of FAX Utility. ❏ Windows Select Fax Settings for Printer > Received Fax Output Settings.
User's Guide Faxing 3. Select the report to print, and then follow the on-screen instruction. Note: You can change the report format. From the home screen, select Setup > Fax Settings > Output Settings, and then change the Attach Image to Report or Report Format settings. Related Information & “Fax Mode” on page 17 & “Fax Settings” on page 22 Setting Up to Print Fax Reports Automatically You can make settings to print the following fax reports automatically.
User's Guide Replacing Ink Cartridges Replacing Ink Cartridges Checking the Ink Levels You can check the approximate ink levels from the control panel or the computer. Checking the Ink Levels - Control Panel 1. Enter Setup from the home screen. 2. Select Ink Levels. Checking the Ink Levels - Windows 1. Access the printer driver window. 2. Click Ink Levels on the Main tab. Note: If EPSON Status Monitor 3 is disabled, the ink levels are not displayed.
User's Guide Replacing Ink Cartridges Product Icon Black Cyan Magenta Yellow WF-2750 Pen and Crossword 16 16 16 16 16XL* 16XL* 16XL* 16XL* Coffee 37 37 37 37 37XL* 37XL* 37XL* 37XL* WF-2751 * "XL" indicates a large cartridge. Note: ❏ Not all cartridges are available in all regions. ❏ For users in Europe, visit the following website for information on Epson's ink cartridge yields. http://www.epson.
User's Guide Replacing Ink Cartridges ❏ Do not open the ink cartridge package until you are ready to install it in the printer. The cartridge is vacuum packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal printing may not be possible. ❏ Be careful not to break the hooks on the side of the ink cartridge when you remove it from the package.
User's Guide Replacing Ink Cartridges ❏ Do not replace ink cartridges with the power off. Do not move the print head by hand; otherwise, you may damage the printer. ❏ Do not turn off the printer during ink charging. If the ink charging is incomplete, you may not be able to print. ❏ Do not leave the printer with the ink cartridges removed or do not turn off the printer during cartridge replacement.Otherwise, ink remaining in the print head nozzles will dry out and you may not be able to print.
User's Guide Replacing Ink Cartridges Note: If you replace the ink cartridges while coping, the originals may move out of place. Press the y button to cancel and replace the originals. 1. Do one of the following. ❏ When prompted to replace ink cartridges Check which ink cartridge needs to be replaced, press the OK button, and then press the u button.
User's Guide Replacing Ink Cartridges c Important: ❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing. ❏ Do not shake cartridges after opening the package, as they may leak. 4. Open the scanner unit with the document cover closed. 5. Squeeze the tab on the ink cartridge and pull it straight up. If you cannot remove the ink cartridge, pull it firmly.
User's Guide Replacing Ink Cartridges 6. Insert the new ink cartridge, and then press it down firmly. 7. Close the scanner unit. 8. Press the x button. Ink charging starts. c Important: Do not turn off the printer during ink charging. If the ink charging is incomplete, you may not be able to print.
User's Guide Replacing Ink Cartridges Temporarily Printing with Black Ink - Windows 1. When the following window is displayed, cancel printing. Note: If you cannot cancel printing from the computer, cancel using the printer's control panel. 2. Access the printer driver window. 3. Clear Borderless on the Main tab. 4. Select plain papers or Envelope as the Paper Type setting on the Main tab. 5. Select Grayscale. 6.
User's Guide Replacing Ink Cartridges Related Information & “Loading Paper in the Paper Cassette” on page 28 & “Printing Basics - Windows” on page 35 Temporarily Printing with Black Ink - Mac OS X Note: To use this feature through a network, connect with Bonjour. 1. Click the printer icon in the Dock. 2. Cancel the job. Note: If you cannot cancel printing from the computer, cancel using the printer's control panel. 3.
User's Guide Replacing Ink Cartridges Note: ❏ If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and then select Enable EPSON Status Monitor 3. ❏ Composite black looks slightly different from pure black. In addition, the print speed is reduced. ❏ To maintain the quality of the print head, black ink is also consumed. Options Description Yes Select to use a mixture of color inks to create black.
User's Guide Maintaining the Printer Maintaining the Printer Checking and Cleaning the Print Head If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are clogged, clean the print head. c Important: ❏ Do not open the scanner unit or turn off the printer during head cleaning.
User's Guide Maintaining the Printer 7. When cleaning is finished, print the nozzle check pattern again. Repeat cleaning and printing the pattern until all lines are printed completely. Related Information & “Loading Paper in the Paper Cassette” on page 28 Checking and Cleaning the Print Head - Windows 1. Load A4-size plain paper in the printer. 2. Access the printer driver window. 3. Click Nozzle Check on the Maintenance tab. 4. Follow the on-screen instructions.
User's Guide Maintaining the Printer 3. Select Maintenance > Print Head Alignment. 4. Select Vertical Alignment or Horizontal Alignment, and then follow the on-screen instructions to print an alignment pattern. ❏ Vertical Alignment: Select this if your printouts look blurry or vertical ruled lines appear misaligned. ❏ Horizontal Alignment: Select this if you see horizontal banding at regular intervals. 5. Follow the on-screen instructions to align the print head.
User's Guide Maintaining the Printer Related Information & “Loading Paper in the Paper Cassette” on page 28 & “Windows Printer Driver” on page 98 Aligning the Print Head - Mac OS X 1. Load A4-size plain paper in the printer. 2. Select System Preferences from the then select the printer. 3. Click Options & Supplies > Utility > Open Printer Utility. 4. Click Print Head Alignment. 5. Follow the on-screen instructions.
User's Guide Maintaining the Printer c Important: Never use alcohol or thinner to clean the printer. These chemicals can damage the printer. 1. Open the ADF cover. 2. Use a soft, dry, clean cloth to clean the roller and the interior of the ADF.
User's Guide Maintaining the Printer 3. Open the document cover. 4. Clean the part that is shown in the illustration. Note: ❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid. ❏ Do not press the glass surface too hard. ❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.
User's Guide Maintaining the Printer c Important: Never use alcohol or thinner to clean the printer. These chemicals can damage the printer. 1. Open the document cover. 2. Use a soft, dry, clean cloth to clean the surface of the scanner glass. Note: ❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid. ❏ Do not press the glass surface too hard.
User's Guide Network Service and Software Information Network Service and Software Information This section introduces the network services and software products available for your printer from the Epson website or the supplied CD. Epson Connect Service By using Epson Connect service available on the Internet, you can print from your smartphone, tablet PC, or laptop, anytime and practically anywhere. The features available on the Internet are as follows.
User's Guide Network Service and Software Information Running Web Config on a Web Browser 1. Check the printer's IP address. Select Setup > Network Settings > Network Status > Wired LAN/Wi-Fi Status or Wi-Fi Status from the home screen, and then check the printer's IP address. 2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address. Format: IPv4: http://the printer's IP address/ IPv6: http://[the printer's IP address]/ Examples: IPv4: http://192.168.100.
User's Guide Network Service and Software Information 2. Click Options & Supplies> Show Printer Webpage. Windows Printer Driver The printer driver controls the printer according to the commands from an application. Making settings on the printer driver provides the best printing results. You can also check the status of the printer or keep it in top operating condition using the printer driver utility. Note: You can change the language of the printer driver.
User's Guide Network Service and Software Information Starting the utility Access the printer driver window. Click the Maintenance tab. Restricting Settings for the Windows Printer Driver You can lock some settings of the printer driver so that other users cannot change them. Note: Log on to your computer as an administrator. 1. Open the Optional Settings tab in printer properties.
User's Guide Network Service and Software Information Related Information & “Windows Printer Driver” on page 98 Mac OS X Printer Driver The printer driver controls the printer according to the commands from an application. Making settings on the printer driver provides the best printing results. You can also check the status of the printer or keep it in top operating condition using the printer driver utility.
User's Guide Network Service and Software Information EPSON Scan (Scanner Driver) EPSON Scan is an application for controlling scanning. You can adjust the size, resolution, brightness, contrast, and quality of the scanned image. Note: You can also start EPSON Scan from a TWAIN-compliant scanning application. Starting on Windows Note: For Windows Server operating systems, you need to install the Desktop Experience feature.
User's Guide Network Service and Software Information PC-FAX Driver (Fax Driver) PC-FAX driver is an application that allows you to send a document created on a separate application as a fax directly from the computer. PC-FAX driver is installed when you install FAX Utility. See the application's help for details. Note: ❏ Windows Server operating systems are not supported. ❏ The operation differs depending on the application you used to create the document. See the application's help for details.
User's Guide Network Service and Software Information Note: ❏ Windows Server operating systems are not supported. ❏ To use this application, the printer driver needs to be installed. Starting on Windows ❏ Windows 10 Click the start button, and then select All apps > Epson Software > Epson Easy Photo Print. ❏ Windows 8.1/Windows 8 Enter the application name in the search charm, and then select the displayed icon.
User's Guide Network Service and Software Information Note: You can also start EPSON Software Updater by clicking the printer icon on the task bar on the desktop, and then selecting Software Update. Starting on Mac OS X Select Go > Applications > Epson Software > EPSON Software Updater. EpsonNet Config EpsonNet Config is an application that allows you to set the network interface addresses and protocols. See the operations guide for EpsonNet Config or the application's help for more details.
User's Guide Network Service and Software Information Click the start button and select Control Panel. 4. Open Uninstall a program (or Add or Remove Programs): ❏ Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista/Windows Server 2012 R2/Windows Server 2012/Windows Server 2008 R2/Windows Server 2008 Select Uninstall a program in Programs. ❏ Windows XP/Windows Server 2003 R2/Windows Server 2003 Click Add or Remove Programs. 5. Select the application you want to uninstall. 6.
User's Guide Network Service and Software Information Related Information & “EPSON Software Updater” on page 103 Installing Applications Connect your computer to the network and install the latest version of applications from the website. Note: ❏ Log on to your computer as an administrator. Enter the administrator password if the computer prompts you. ❏ When reinstalling an application, you need to uninstall it first. 1. Quit all running applications. 2.
User's Guide Solving Problems Solving Problems Checking the Printer Status You can check error messages and the approximate ink levels on the LCD screen or the computer. Checking Messages on the LCD Screen If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to solve the problem. Error Messages Solutions Printer Error 0xXX Remove any paper or protective material in the printer. If the error message is still displayed, contact Epson support.
User's Guide Solving Problems Error Messages Solutions Recovery Mode The printer has started in recovery mode because the firmware update failed. Follow the steps below to try to update the firmware again. 1. Connect the computer and the printer with a USB cable. (During recovery mode, you cannot update the firmware over a network connection.) 2. Visit your local Epson website for further instructions. * In some print cycles a very small amount of surplus ink may be collected in the ink pad.
User's Guide Solving Problems c Important: Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer. Removing Jammed Paper from Inside the Printer ! Caution: ❏ Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be injured. ❏ Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating, it could cause an injury.
User's Guide Solving Problems c Important: Do not touch the white flat cable or translucent part inside the printer. Doing so may cause a malfunction. 3. Close the scanner unit. Removing Jammed Paper from the Paper Cassette 1. Close the output tray. 2. Pull out the paper cassette.
User's Guide Solving Problems 3. Remove the jammed paper. 4. Align the edges of the paper and slide the edge guides to the edges of the paper. 5. Insert the paper cassette in the printer. Removing Jammed Paper from the Rear Cover 1. Remove the rear cover.
User's Guide Solving Problems 2. Remove the jammed paper. 3. Remove jammed paper from the rear cover. 4. Open the cover of the rear cover. 5. Remove the jammed paper.
User's Guide Solving Problems 6. Close the cover of the rear cover, and then insert the rear cover in the printer. Removing Jammed Paper from the ADF ! Caution: Be careful not to trap your fingers when closing the document cover. Otherwise you may be injured. 1. Open the ADF cover. 2. Remove the jammed paper.
User's Guide Solving Problems 3. Open the document cover. 4. Remove the jammed paper. 5. Close the document cover.
User's Guide Solving Problems 6. Raise the ADF input tray, and then remove the jammed paper. 7. Close the ADF cover. Paper Does Not Feed Correctly Check the following if the paper jams, paper feeds at a slant, several sheets of paper feed at a time, no paper feeds, or paper is ejected. ❏ Place the printer on a flat surface and operate in the recommended environmental conditions. ❏ Use paper supported by this printer. ❏ Follow the paper handling precautions.
User's Guide Solving Problems ❏ Clean the inside of the ADF. ❏ Do not load originals above the line indicated by the triangle symbol on the ADF. ❏ Check that the ADF icon appears on the control panel. If it does not appear, place the originals again. Related Information & “Available Originals for the ADF” on page 32 & “Placing Originals on the ADF” on page 32 & “Cleaning the ADF” on page 92 Power and Control Panel Problems Power Does Not Turn On ❏ Make sure the power cord is securely plugged in.
User's Guide Solving Problems ❏ If you are using the printer over a network, make sure the printer is connected to the network. You can check the status by checking the indicators on the control panel or by printing the network status sheet. If the printer is not connected to the network, see the Network Guide. ❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a lower resolution or a smaller size.
User's Guide Solving Problems ❏ When images or photos are printed in unexpected colors, adjust the color and then print again. The automatic color correction feature uses the standard PhotoEnhance correction mode. Try another PhotoEnhance correction mode by selecting an option other than Auto Correct as the Scene Correction setting. If the problem continues, use any other color correction feature other than PhotoEnhance.
User's Guide Solving Problems ❏ Clean the scanner glass. ❏ Clean the ADF. ❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner glass. Uneven colors, smears, or dots may appear when the original or the document cover is pressed too hard. ❏ If a moiré (cross-hatch) pattern appears, change the reduce and enlarge setting or place the original at a slightly different angle. ❏ When the paper is smeared, lower the copy density setting.
User's Guide Solving Problems ❏ If margins still appear even during borderless printing, try the following settings. ❏ Windows Click Extended Settings on the printer driver's Maintenance tab, and then select Remove white borders. ❏ Mac OS X menu > Printers & Scanners (or Print & Scan, Print & Fax), and Select System Preferences from the then select the printer. Click Options & Supplies > Options (or Driver). Select On as the Remove white borders setting.
User's Guide Solving Problems The Printed Image Is Inverted Clear any mirror image settings in the printer driver or the application. ❏ Windows Clear Mirror Image on the printer driver's More Options tab. ❏ Mac OS X Clear Mirror Image from the print dialog's Print Settings menu. The Printout Problem Could Not be Cleared If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the printer driver.
User's Guide Solving Problems Cannot Start Scanning ❏ If you are scanning with the ADF, check that the document cover and ADF cover are closed. ❏ Connect the USB cable securely to the printer and the computer. ❏ If you are using a USB hub, try to connect the printer directly to the computer. ❏ If you cannot scan over a network, see the Network Guide. ❏ If you scan at a high resolution over a network, a communication error may occur. Lower the resolution.
User's Guide Solving Problems Related Information & “Cannot Start Scanning” on page 122 Scanned Image Problems Scan Quality Is Poor ❏ Clean the scanner glass. ❏ Clean the ADF. ❏ Do not press too hard on the original or the document cover when you are placing the originals on the scanner glass. Uneven colors, smears, or dots may appear when the original or the document cover are pressed too hard. ❏ Remove dust from the original. ❏ Make the appropriate document type settings on the control panel.
User's Guide Solving Problems Related Information & “Scan Mode” on page 17 Moiré (Cross-Hatch) Patterns Appear in the Scanned Image ❏ Place the original at a slightly different angle. ❏ Select Descreening in EPSON Scan. ❏ Change the resolution setting. Related Information & “Scan Mode” on page 17 Scanning Area or Direction Is Not Correct ❏ When placing the originals on the scanner glass, align the corner of the original with the corner indicated by a symbol on the frame of the scanner glass.
User's Guide Solving Problems Related Information & “Uninstalling Applications” on page 104 & “Installing Applications” on page 106 Other Scanning Problems Thumbnail Preview Does Not Work Properly See the EPSON Scan help. Scanning Is Too Slow ❏ Lower the resolution. ❏ Click Configuration in EPSON Scan, and then disable Quiet Mode on the Other tab.
User's Guide Solving Problems ❏ To connect to a DSL phone line, you need to use a DSL modem equipped with a built-in DSL filter, or install a separate DSL filter to the line. Contact your DSL provider. ❏ If you are connecting to a DSL phone line, connect the printer directly to a telephone wall jack to see if the printer can send a fax. If it works, the problem may be caused by the DSL filter. Contact your DSL provider. ❏ Enable the ECM setting on the control panel.
User's Guide Solving Problems ❏ If you have blocked your caller ID, unblock it. Some phones or fax machines automatically reject anonymous calls. ❏ Ask the recipient if the fax number is correct and the recipient's fax machine is ready to receive a fax. Related Information & “Fax Settings” on page 22 & “Cannot Send or Receive Faxes” on page 125 Cannot Send Faxes to a Specific Recipient Check the following if you cannot send faxes to a specific recipient due to an error.
User's Guide Solving Problems Memory Full Error Occurs ❏ If the printer has been set to save received faxes on a computer, turn on the computer that is set to save the faxes. Once the faxes are saved in the computer, they are deleted from the printer's memory. ❏ Even though the memory is full, you can send a monochrome fax by using the Direct Send feature. Or divide your originals into two or more to send them in several batches.
User's Guide Solving Problems Received Fax Quality Is Poor ❏ Enable the ECM setting on the control panel. ❏ Contact the sender and ask them to send at a higher quality mode. ❏ Reprint the received fax. Related Information & “Fax Settings” on page 22 & “Reprinting Received Faxes” on page 78 Received Faxes Are Not Printed If an error has occurred on the printer, such as a paper jam, the printer cannot print received faxes. Check the printer.
User's Guide Solving Problems Sender's Fax Number Not Displayed on Received Faxes or the Number Is Wrong The sender may not have set the fax header information or may have set it incorrectly. Contact the sender. Other Problems Slight Electric Shock when Touching the Printer If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer. Install a ground wire to the computer that is connected to the printer.
User's Guide Solving Problems Application Is Blocked by a Firewall (for Windows Only) Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
User's Guide Appendix Appendix Technical Specifications Printer Specifications Print Head Nozzle Placement Black ink nozzles: 400 Color ink nozzles: 128 for each color Weight of Paper Plain Paper 64 to 90 g/m2(17 to 24lb) Envelopes Envelope #10, DL, C6: 75 to 90 g/m2 (20 to 24 lb) Printable Area Printable Area for Single Sheets Print quality may decline in the shaded areas due to the printer's mechanism. Normal printing A 3.0 mm (0.12 in.) B 3.0 mm (0.12 in.) C 47.0 mm (1.85 in.) D 45.
User's Guide Appendix A 3.0 mm (0.12 in.) B 5.0 mm (0.20 in.) C 47.0 mm (1.85 in.) D 18.0 mm (0.70 in.) Scanner Specifications Scanner Type Flatbed Photoelectric Device CIS Effective Pixels 10200×14040 pixels (1200 dpi) Maximum Document Size 216×297 mm (8.5×11.7 in.) A4, Letter Scanning Resolution 1200 dpi (main scan) 2400 dpi (sub scan) Output Resolution 50 to 4800, 7200, 9600 dpi (50 to 4800 dpi in 1 dpi increments.
User's Guide Appendix Resolution Monochrome ❏ Standard: 8 pel/mm×3.85 line/mm (203 pel/in.×98 line/in.) ❏ Fine: 8 pel/mm×7.7 line/mm (203 pel/in.×196 line/in.) ❏ Photo: 8 pel/mm×7.7 line/mm (203 pel/in.×196 line/in.) Color ❏ Fine: 200×200 dpi ❏ Photo: 200×200 dpi Page Memory Up to 100 pages (when received ITU-T No.
User's Guide Appendix Dimensions Dimensions Storage ❏ Width: 425 mm (16.7 in.) ❏ Depth: 360 mm (14.2 in.) ❏ Height: 230 mm (9.1 in.) Printing ❏ Width: 425 mm (16.7 in.) ❏ Depth: 559 mm (22.0 in.) ❏ Height: 230 mm (9.1 in.) Weight* * Approx. 6.6 kg (14.6 lb) Without the ink cartridges and the power cord. Electrical Specifications Model 100 to 240 V Model 220 to 240 V Model Rated Frequency Range 50 to 60 Hz 50 to 60 Hz Rated Current 0.5 to 0.3 A 0.
User's Guide Appendix Environmental Specifications Operation Use the printer within the range shown in the following graph. Temperature: 10 to 35°C (50 to 95°F) Humidity: 20 to 80% RH (without condensation) Storage Temperature: -20 to 40°C (-4 to 104°F)* Humidity: 5 to 85% RH (without condensation) * You can store for one month at 40°C (104°F). Environmental Specifications for Ink Cartridges Storage Temperature - 30 to 40 °C (- 22 to 104 °F)* Freezing Temperature -16 °C (3.
User's Guide Appendix Regulatory Information Standards and Approvals Standards and Approvals for U.S. Model Safety UL60950-1 CAN/CSA-C22.2 No.60950-1 EMC FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module. Manufacturer: Askey Computer Corporation Type: WLU6320-D69 (RoHS) This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules.
User's Guide Appendix For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Croatia, Cyprus, Greece, Slovenia, Malta, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, and Slovakia. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a nonrecommended modification of the products.
User's Guide Appendix ! Caution: Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be injured. c Important: ❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak. ❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the printer from printing. 1. Turn off the printer by pressing the P button. 2.
User's Guide Appendix 7. Close the scanner unit. 8. Prepare to pack the printer as shown below. 9. Pack the printer in its box, using the protective materials. When you use the printer again, make sure you remove the tape securing the ink cartridge holder. If print quality has declined the next time you print, clean and align the print head.
User's Guide Appendix Contacting Epson Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product manuals, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
User's Guide Appendix Transportation of Product Epson recommends retaining product packaging for future transportation. Securing the ink tank with tape and keeping the product upright is also recommended.
