Datasheet

Actual size
Crystal oscillator
Specifications (characteristics)
Item
Symbol
Specifications
Output frequency range
f0
1MHz to 75MHz
Supply voltage
VCC
1.6 V to 3.6 V
1.71 V to 3.6 V
2.2 V to 3.6 V
1.8 V Typ.
1.6 V to 2.2 V
2.5 V Typ.
2.2 V to 3.0 V
3.3 V Typ.
2.7 V to 3.6 V
Storage temperature
T_stg
-40 C to +125 °C
Operating temperature
T_use
-40 C to +85 °C / -40 C to +105 °C
Frequency tolerance
f_tol
S: 25 10
-6
L:±50 × 10
-6
Y:±50 × 10
-6
, W:±100 × 10
-6
Current consumption
ICC
1.5 mA Max.
1.6 mA Max.
1.8 mA Max.
1.8 mA Max.
2.0 mA Max.
2.2 mA Max.
2.1 mA Max.
2.4 mA Max.
2.6 mA Max.
2.4 mA Max.
2.8 mA Max.
3.0 mA Max.
Stand-by current
I_std
2.1 µA Max.
2.5 µA Max.
2.7 µA Max.
ST
Symmetry
SYM
45 % to 55 %
Output voltage
VOH
Vcc-0.4V Min.
VOL
0.4V Max.
Output load condition
(CMOS)
L_CMOS
15 pF Max.
Input voltage
VIH
80 % Vcc Min.
ST
VIL
20 % Vcc Max.
Rise time and Fall time
tr/ tf
3.5 ns Max.
3 ns Max.
Start-up time
t_str
3 ms Max.
Frequency aging
f_aging
3 10
-6
/ year Max.
Phase noise
C/N
-145 dBc/Hz Typ.
-158 dBc/Hz Typ.
-161 dBc/Hz Typ.
1Maximum T_use of operating range
Product Name SG-210 S T F 25.000000MHz L
(Standard form) ②③
Model Function (S:Standby)
Supply voltage Frequency
Frequency tolerance
External dimensions (Unit:mm)
Footprint (Recommended) (Unit:mm)
Supply voltage
T
1.6 to 3.6 V See of figure *1
Frequency tolerance
S
±25 × 10
-6
/ -20 to +70°C
L
±50 × 10
-6
/ -40 to +85°C
Y
±50 × 10
-6
/ -40 to +105°C
W
±100 × 10
-6
/ -40 to +105°C
25.0
O
F123A
2.50.15
0.9
2.00.15
#2
#1
#2
#4
#3
0.80.1
#3
0.8
0.6
#1
#4
0.7
Pin map
Pin
Connection
1
ST
2
GND
3
OUT
4
VCC
Note.
ST pin = HIGH or "open" : Specified frequency output.
ST pin = LOW : Output is high impedance, oscillation stops.
1.3
Resist
C
(ex. 0.01 µF)
#1
#2
#3
#4
1.7
1.1
0.9
CRYSTAL OSCILLATOR (SPXO)
OUTPUT : CMOS
SG-210 STF
Frequency range : 1 MHz to 75 MHz
Supply voltage : 1.6 V to 3.6 V
Function : Standby(
ST
)
External dimensions : 2.5 × 2.0 × 0.8 mm
Operation temperature : -40 to +105 C
Vibration mode : Fundamental
Product Number (please contact us)
X1G004171xxxx00
To maintain stable operation, provide a 0.01uF to 0.1uF by-pass
capacitor at a location as near as possible to the power source
terminal of the crystal product (between Vcc - GND).
f
0
[MHz]
Vcc[V]
1.60
1.71
3.63
1.2 60 75
105
85
2.25
3.6
2.2
1.6
1
1.71
60
75

Summary of content (2 pages)