Operation Manual

❏ Remove each sheet from the output tray as it is printed.
❏ Do not touch or allow anything to come into contact with the printed side of paper with a shiny finish. To handle
your prints, follow the instructions of the paper.
❏ Run the Head Cleaning utility.
& “Cleaning the Print Head” on page 148
❏ Run the Print Head Alignment utility.
& “Aligning the Print Head” on page 150
❏ If the paper is smeared with ink after printing, clean the interior of the product.
& “Cleaning the interior of the product” on page 158
❏ If you are printing high-density data on plain paper using automatic 2-sided printing, lower the Print Density and
choose a longer Increased Ink Drying Time in the Print Density Adjustment window (for Windows) or in the
Two-sided Printing Settings (for Mac OS X) of your printer driver.
& “2-sided printing” on page 62
❏ If there is problem with copy quality, clean the surface of the scanner glass.
& “Cleaning the exterior of the product” on page 156
Miscellaneous Printout Problems
Incorrect or garbled characters
❏ Clear any stalled print jobs.
& “Canceling Printing” on page 57
❏ Turn off the product and computer. Make sure the product’s interface cable is securely plugged in.
❏ Uninstall the printer driver, then reinstall it.
& “Uninstalling Your Software” on page 161
Incorrect margins
❏ Make sure that the paper is loaded into the rear paper feed slot or the paper cassette correctly.
& “Loading Paper” on page 27
❏ Check the margin settings in your application. Make sure that the margins are within the printable area of the
page.
& “Printable area” on page 199
❏ Make sure the printer driver settings are appropriate for the paper size you are using.
For Windows, check the Main window.
For Mac OS X, check the Page Setup dialog box or Print dialog box.
❏ Uninstall the printer driver, then reinstall it.
& “Uninstalling Your Software” on page 161
User’s Guide
Troubleshooting for Printing/Copying
181