User Manual

291
9. Carefully remove any jammed paper from beneath the ADF input tray.
10. Close the ADF input tray.
11. Reload your originals.
Caution: Do not load the ADF beyond its capacity for your paper size. Also make sure your originals
are not bent, folded, or curled and do not have tape, staples, or other materials that could obstruct the
feeder.
12. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam
message, check the other paper jam solutions.
Parent topic: Solving Paper Problems
Related references
Paper Jam Problems Inside the Product
Paper Jam Problems in the Rear Cover
Paper Jam Problems in the Paper Cassette
Related tasks
Cancelling Printing Using a Product Button
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.