User Manual

You see a screen like this:

3. Select Wi-Fi (Recommended). (If the product is already installed on a wired network, select

Router.)

4. Select Start Setup or Change Settings. (If the product is already installed on a wired network,

select Change to Wi-Fi Connection and select Yes to confirm.)

5. Select Push Button Setup (WPS).

6. Follow the instructions on the LCD screen to complete WPS setup.

7. Select Close to exit.

You see the icon on the LCD screen and should be able to connect to your product directly from

your computer or device, and then print. If you are printing from a computer, make sure you installed

the network software as described on the Start Here sheet.

Note: If you don't see the icon on the LCD screen, you may have selected the wrong network

name or entered the password incorrectly. Repeat these steps to try again.

Parent topic: Wi-Fi Protected Setup (WPS)

Printing a Network Status Sheet

You can print a network status sheet to help you determine the causes of any problems you may have

using your product on a network.

1. Press the home icon, if necessary.

2. Select Settings.