Printer User Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
ESC 5
Cancel Italic Mode
Format:
ASCII code:
ESC 5
Decimal:
27 53
Hexadecimal: 1B 35
Comments:
Cancels the mode selected by ESC 4.
ESC R
Select an International Character Set
Format:
ASCII code:
ESC R
n
Decimal:
27
82
n
Hexadecimal: 1B 52
n
Comments:
The following values can be used for n:
0=USA 5=Sweden
l0=Denmark II
1=France
6=Italy
11
=Spain
II
2=Germany
7=Spain I 12=Latin America
3=England 8=Japan
13=Korea
4=Denmark I 9=Norway 64=Legal
Overrides the SelecType settings of the international character set.
User-Defined Characters
See Chapter 4 for sample programs and full information on this
topic.
ESC & Define User-Defined Characters
Format:
ASCII code:
ESC
&
Decimal:
27
38
Hexadecimal:’
1B
26
Comments:
Od
Id
2d . . .
dn
Od
Id
26
. . .
dn
00
dl 62 . . .
dn
This command allows characters to be redefined in the currently
selected mode.
8-32
Command Summary