Printer User Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
Stacker capacity:
Face down Single sheets:
Face up Single sheets:
Envelopes:
Envelopes:
Reliability
Up to
60
sheets of
22
lb.
paper
Up to 75 sheets of
17
lb.
paper
Up to
10
(plain and bond
type)
Up to
12
(air mail)
Up to
150
sheets of
22
lb.
paper
Up to
185
sheets
of
17
lb.
paper
Up to
25
(plain and bond
type)
Up to
30
(air mail)
MCBF (Mean Cycle Between Failure):
100,000
cycles
Environmental conditions
Temperature:
Humidity:
Operation:
Storage:
Operation:
Storage:
+41"F(+5"C)
to
+95”F
(+35"(z)
-22"F(-30°C)
to
+158"F
(+7o"c)
15%
to 80% without
condensation
5%
to 90% without
condensation
Technical Specifications
A-7