Printer User Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX

Table of Contents
Introduction
......................................
Features
..........................................
Options
..........................................
About This Guide
..................................
Where to Get Help
.................................
1
Setting Up the Printer
...............................
Unpacking the Printer
..............................
Choosing a Place for the Printer
......................
Assembling the Printer
..............................
Testing the Printer
..................................
Connecting the Printer to Your Computer
..............
Setting Up Your Application Software
.................
2
Paper Handling
....................................
Using Single Sheets
.................................
Using Continuous Paper
............................
Switching between Continuous and Single Sheets
........
Printing on Special Paper
...........................
3
Using the Printer
...................................
Operating the Control Panel
.........................
SelecType Settings
.................................
Page Length
.......................................
Skip Over Perforation
..............................
Setting the Loading Position
.........................
Short Tear-Off
.....................................
Selecting Typestyles
................................
Choosing an International Character Set
...............
Choosing a Character Table
.........................
1-1
l-2
l-6
l-7
1-15
l-22
1-27
2-1
2-2
2-5
2-16
2-22
3-1
3-2
3-8
3-26
3-28
3-30
3-31
3-33
3-39
3-40