Printer User Manual
Table Of Contents
- FRONT MATTER
- TABLE OF CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-USING SOFTWARE AND GRAPHICS
- Using the LQ-2550 With Application Programs
- Computer-Printer Communication
- Enhancing Your Printing
- Graphics
- User-Defined Characters
- Designing Your Characters
- Design Grids
- Data Numbers
- Sending Information to Your Printer
- Printing User-Defined Characters
- Copying ROM Characters to RAM
- Letter Quality Characters
- Proportional Mode Characters
- Superscripts and Subscripts
- The Graphics Command
- Column Reservation Numbers
- A simple Graphics Program
- Using Hand-Calculated Data to Print Graphics
- Using Software and Graphics
- Mixing Print Styles
- CHAP 5-MAINTENANCE AND TRANSPORTATION
- CHAP 6-TROUBLESHOOTING
- Troubleshooting
- Problems and Solutions
- The Printer Does Not Print
- The Printer Stops Printing
- The Printout is Spaced Incorrectly
- The Printout is Faint or Uneven
- The Printout is Not what You Expect
- Single Sheets Do Not Feed Properly
- Continuous Paper Does Not Feed Properly
- Cut Sheet Feeder Does Not Load Paper Correctly
- The Short Tear-Off Feature Does Not Work Properly
- Color Printing Is Not What You Expect
- Data Dump Mode
- CHAP 7-USING PRINTER OPTIONS
- CHAP 8-COMMAND SUMMARY
- APPENDIX A-TECHNICAL SPECIFICATIONS
- GLOSSARY
- INDEX
RICiHTMARGIN*
CG TABLE
COUNTRY
1 to 136 columns
*The column spacing is based on a pitch of
10 CPI.
Italic, Graphic,
Download
IJM,
France, Germany,
IJK,
Denmarkl,
Sweden, Italy,
Spainl,
Japan,
Norway,
Denmark2,
Spain2,
Latin
America, Korea, Legal
PRINT DIR.
Bi-directional, Uni-directional
CiiLOR
Black,
Magenta, Cyan,
Uil3let,
Yellcfw,
Red, Green
The changes you make are temporarily made to the current macro’s
settings (until you turn off the printer), but you can save
the
changes as
any of the four macros. Changed macros that you save remain in effect
even
after you turn off the printer.
The following example describes the procedure for changing the
FONT
option, but the other options (with the exception of
FORM
LENGTH)
can
be changed in the same manner. (The procedure for setting
FORM
LENGTH
is described later in this chapter.) The displays shown may be
different if your printer’s preset settings have been changed.
Note: The
following options are described in more detail later in this
chapter:
FORMLENGTH,
1”
SKIP,
f&lTOTEAROFF,
FONT, PITCH,
COUNTRY,
andCG
TABLE.
3-16
Using the Printer